Pppoe - Draytek Vigor 2110 User Manual

4 . 1 . 2 P P P o E
4 . 1 . 2 P P P o E
To choose PPPoE as the accessing protocol of the internet, please select PPPoE from the
Internet Access menu. The following web page will be shown.
Available settings are explained as follows:
Item
PPPoE Setup
ISP Access Setup
WAN Connection
Detection
Vigor2110 Series User's Guide
Description
PPPoE Link - Click Enable for activating this function. If
you click Disable, this function will be closed and all the
settings that you adjusted in this page will be invalid.
Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP.
ISP Name – Type in the name of the ISP.
Username – Type in the username provided by ISP in this
field.
Password – Type in the password provided by ISP in this
field.
Index (1-15) in Schedule Setup - You can type in four sets
of time schedule for your request. All the schedules can be
set previously in Application >> Schedule web page and
you can use the number that you have set in that web page.
Such function allows you to verify whether network
connection is alive or not through ARP Detect or Ping
Detect.
Mode – Choose ARP Detect or Ping Detect for the system
83