Draytek Vigor 2110 User Manual page 109

Vigor 2110 series broadband firewall router
Hide thumbs Also See for Vigor 2110:
Table of Contents

Advertisement

DHCP Server
Configuration
DNS Server IP Address
Vigor2110 Series User's Guide
1st Subnet - Select the router to change the RIP
information of the 1st subnet with neighboring routers.
2nd Subnet - Select the router to change the RIP
information of the 2nd subnet with neighboring
routers.
DHCP stands for Dynamic Host Configuration Protocol.
The router by factory default acts a DHCP server for your
network so it automatically dispatch related IP settings to
any local user configured as a DHCP client. It is highly
recommended that you leave the router enabled as a DHCP
server if you do not have a DHCP server for your network.
If you want to use another DHCP server in the network
other than the Vigor Router's, you can let Relay Agent help
you to redirect the DHCP request to the specified location.
Enable Server - Let the router assign IP address to every
host in the LAN.
Disable Server – Let you manually assign IP address to
every host in the LAN.
st
Relay Agent – (1
subnet/2
subnet that DHCP server is located the relay agent should
redirect the DHCP request to.
DHCP Server IP Address - Set the IP address of the DHCP
server you are going to use so the Relay Agent can help to
forward the DHCP request to the DHCP server.
Start IP Address - Enter a value of the IP address pool for
the DHCP server to start with when issuing IP addresses. If
the 1st IP address of your router is 192.168.1.1, the starting
IP address must be 192.168.1.2 or greater, but smaller than
192.168.1.254.
IP Pool Counts - Enter the maximum number of PCs that
you want the DHCP server to assign IP addresses to. The
default is 50 and the maximum is 253.
Gateway IP Address - Enter a value of the gateway IP
address for the DHCP server. The value is usually as same
as the 1st IP address of the router, which means the router is
the default gateway.
Lease Time – Enter the time to determine how long the IP
address assigned by DHCP server can be used.
DNS stands for Domain Name System. Every Internet host
must have a unique IP address, also they may have a
human-friendly, easy to remember name such as
www.yahoo.com. The DNS server converts the
user-friendly name into its equivalent IP address.
Primary IP Address -You must specify a DNS server IP
address here because your ISP should provide you with
usually more than one DNS Server. If your ISP does not
101
nd
subnet) Specify which

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vigor 2110nVigor 2110vn

Table of Contents