Table of Contents
Advertisement
WAN physical type
After finishing all the settings here, please click OK to activate them.
3
.
1
.
3
S
t
a
t
i
c
o
3
.
1
.
3
S
t
a
t
i
c
o
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP address
to the WAN interface.
To choose Static or Dynamic IP as the accessing protocol of the internet, please select Static
or Dynamic IP from the Internet Access menu. The following web page will be shown.
Access Control
Vigor2100 Series User's Guide
Fixed IP – Click Yes to use this function and type in a fixed IP
address in the box.
Check and choose a proper type used for duplex between this device
and other router that you want to communicate. Both sides should
use the same physical type; otherwise, the connection might be
failed due to inconsistent type. It is recommended for you to set
Auto negotiation as the physical type.
r
D
y
n
a
m
i
c
I
P
r
D
y
n
a
m
i
c
I
P
Click Enable for activating this function. If you click Disable, this
function will be closed and all the settings that you adjusted in this
page will be invalid.
21
Advertisement
Table of Contents
