2.
The following page will be shown.
Available settings are explained as follows:
Item
User Name
Password
Confirm Password
WAN IP
Configuration
PPTP Server / L2TP
Server
Back
Next
Cancel
3.
Type in all the information that your ISP provides for this protocol.
Vigor2110 Series User's Guide
Description
Assign a specific valid user name provided by the ISP.
Assign a valid password provided by the ISP.
Retype the password.
Obtain an IP address automatically – the router will get
an IP address automatically from DHCP server.
Specify an IP address – you have to type relational settings
manually.
IP Address - Type the IP address.
Subnet Mask –Type the subnet mask.
Gateway – Type the IP address of the gateway.
Primary DNS –Type in the primary IP address for the
router.
Second DNS –Type in secondary IP address for necessity
in the future.
Type the IP address of the server.
Click it to return to previous setting page.
Click it to get into the next setting page.
Click it to give up the quick start wizard.
21