Draytek Vigor 2110 User Manual page 240

Ring Port
Ring Pattern
Prefer Codec
Packet Size
Voice Active Detector
SIP URL – Type in the SIP URL (e.g., aaa@draytel.org or
abc@iptel.org) as the site for call forwarded.
Time Out – Set the time out for the call forwarding. The
default setting is 30 sec.
Set Phone 1 and/or Phone 2 as the default ring port(s) for this
SIP account.
Choose a ring tone type for the VoIP phone call.
Select one of five codecs as the default for your VoIP calls.
The codec used for each call will be negotiated with the peer
party before each session, and so may not be your default
choice. The default codec is G.729A/B; it occupies little
bandwidth while maintaining good voice quality.
If your upstream speed is only 64Kbps, do not use G.711
codec. It is better for you to have at least 256Kbps upstream if
you would like to use G.711.
Single Codec – If the box is checked, only the selected Codec
will be applied.
The amount of data contained in a single packet. The default
value is 20 ms, which means the data packet will contain 20 ms
voice information.
This function can detect if the voice on both sides is active or
232
Vigor2110 Series User's Guide