Installing The Receiver - Travis Industries 99300687 Installation Instructions Manual

1.0 Installation Instruction for AGP Pellet Stove

1.1 Installing the Receiver

1 Remove the side cover and access panel to both sides of the unit.
2 Remove the thermostat bracket and cover plate on the right side.
3 Connect wires from the thermostat receiver to the wires labeled "TSTAT" from the main wire harness
on the left side of the unit (orientation does not matter).
4 Attach the thermostat receiver to the thermostat bracket with 4 screws.
5 Replace the receiver and bracket into the cutout on the side of the unit (the cover plate can be
discarded).
6 Program the receiver to the remote as per the instructions.
7 Replace access panels and side covers.
Page 2 of 3