Installing The Logs And Coals; Replace The Glass - Travis Industries Spirit DV Owner's Manual

F
INALIZING THE
2 Install the log set and embers (see the illustration below).
Burner Pan
The front log rests on
these platforms.
Twig
Installation
Align the holes
in the left twig
over the pegs
on the front and
back logs.
! We recommend you purge the gas line at this time (with the glass removed). This allows gas to be
detected once it enters the firebox, ensuring gas does not build up.
3 Replace the glass (see the illustration on the previous page).
I
NSTALLATION
These clips keep the rear log
from tilting backwards.
The rear log has a
flat portion that
rests on this ledge.
(C .) -
ONT
For qualified installers only!
Log Installation
The front edge of
the front log rests
on this ledge.
Align the holes
in the right twig
over the pegs
on the left twig
and back log.
Place the embers on this ledge at the
front of the firebox . Do not place the
embers over the burner holes.
The rear log contacts
the air deflectors.
The rear log
protrudes over the
burner pan on both
sides.
Slide the front log all the way
back against the air deflector.
Ember
Installation
P 15
AGE