Advertisement
The words "Child-Proof" will
disappear from the LCD.
The
words
"Child-Proof"
appear here when Child-
Proof feature is turned on.
Figure 7
2.2 RECEIVER OPERATION: see figure 8
The Remote Receiver has 3 operation modes. They are ON, OFF and Remote modes.
A.
"ON" Mode: The Receiver will turn on the GAS Fireplace, AGP Pellet Stove or GAS Insert and not
responding to the
wall mount Transmitter.
B.
"Remote" Mode: The Receiver will respond to the Wall Mount Transmitter and turn the Fireplace, Pellet
Stove or Insert on and off accordingly.
C.
"OFF" Mode: The Receiver will Close the GAS Fireplace, AGP Pellet Stove or GAS Insert and not
responding to the wall mount Transmitter .
Figure 8
BAT.LOW
OFF REMOTE ON
PRESS TO OPEN
GAS Fireplace, AGP Pellet Stove
or GAS Insert Off
ATTENTION: IMPORTANT SAFETY FEATURE see figure 9
6HR Safety Timer(FACTORY DEFAULT IS "ON")
Enable - Timer Set to "ON"
In case of Transmitter failure (Malfunction / Battery run out) or out of transmission range, The Receiver will
shut down the GAS Fireplace, AGP Pellet Stove or GAS Insert automatically after 6Hr of no Transmitter
signal detection.
Disable - Timer Set to "OFF"
The Receiver & GAS Fireplace, AGP Pellet Stove or GAS Insert will continue operate in the last setting and
will not shut off automatically even in case of Transmitter failure. (Note: Not recommended)
Figure 9
6Hr
TIMER
ON
OFF
Child-Proof off
1 2 3 4 5 6
C-P
Child-Proof on
C-P
To unlock Child-Proof, press.
UP-DOWN-DOWN-UP-DOWN
BAT.LOW
OFF REMOTE ON
PRESS TO OPEN
GAS Fireplace, AGP Pellet Stove or
GAS Insert Controlled by Remote
Receiver / GAS
Fireplace, AGP Pellet
Stove or GAS Insert
Status
Page 4 of 6
C-P
ON
DIP
The "Child-Proof " will
disappear from the LCD.
BAT.LOW
OFF REMOTE ON
PRESS TO OPEN
GAS Fireplace, AGP Pellet Stove
or GAS Insert On
First 2Hr since last
Following 4Hr
signal received
Intermittent and
ON
Check For Transmitter Signal
NOTE: AUTO MODE ONLY
Low Battery
Indicator
th
6
Hr since last
signal received
Shut down if no
signal received
Advertisement
