Table of Contents
Advertisement
★
Check the water discharge
1. Take off the frame the unit cover.
Take off the front frame for maintenance
according to the following steps:
● Turn perpendicular airflow direction handle
from I to horizontal direction.
" "
● As shown in the picture on the right, take off
two covers from the front frame and then
unfasten two fixture screws.
● Pull the front frame towards yourself and take
it off.
In case that put the front frame back, turn the
perpendicular airflow direction handle from
" "
I to horizontal, then proceed according to
the third and the second steps.
You should check whether the front frame is
firmly inside the fixture groove on the top.
2. Check the water discharge.
● Put a cup of water into groove.
● Check whether the water flow through the
water discharge hole.
Installation of the outdoor unit
● The outdoor unit must be firmly fixed to avoid falling in the strong wind.
● Install on the cement base the drawing below.
● If it will be installed at seaside or at a place high above the ground and with strong
wind, the AC should be installed against the wall to ensure the normal operation of
the fan and the backing plate should be used.
● If it will be installed in type, the structure of the mounting surface should be made
of solid steel, cement or materials with equivalent strength, and be of enough
bearing capacity. Otherwise, measures such as reinforcement, support or
vibration damping should be adopted.
Fastening locations of outdoor unit
Outdoor Unit Size (mm)
600X250X490
760X260X540
790X280X540
800X300X690(590)
900X330X860
967X380X805
A (mm)
B (mm)
Left installation feet
390
290
539
287
522
300
540
326
606
354
535
353
- 11 -
Bolt
Bolt Vertical airflow
direction plate
Front frame
Pull down the front frame towards your
and take off the front frame.
Right installation feet
Air inlet
A
Air outlet
Outdoor Unit
Advertisement
Table of Contents
