Care & Maintenance; Customer Care Program; Performing Routine Maintenance; Cleaning The Air Filter - Rinnai brivis DINLU10Z7 Operation Manual

Ice inverter air conditioners
Hide thumbs Also See for brivis DINLU10Z7:
Table of Contents

Advertisement

CUSTOMER CARE PROGRAM

Please ensure you register your product warranty on line at brivis�com�au�
The Brivis Customer Care Program is designed to help you get the most out of your new system�
Service and maintenance in accordance with the Service Maintenance Schedule on page 13 is essential in
ensuring the prolonged useful life of your system, and help ensure it operates at optimum efficiency. We may
contact you before each winter or summer season with preferential offers for preventative maintenance services
which will keep your Brivis system in great condition�
Service maintenance is not covered under warranty and is a chargeable service. All units must
have safe and reasonable access and be installed in compliance with the installation instructions
supplied with the unit. Some installations may require two service personnel to attend, in
NOTE
accordance with Health and Safety requirements.
Also note that all refrigerated air conditioning systems have air filters that require regular
inspection and cleaning. Please refer to "Cleaning the Air Filter" on page 9.

PERFORMING ROUTINE MAINTENANCE

TURN OFF THE POWER BEFORE YOU PERFORM ANY MAINTENANCE; OTHERWISE IT
MAY CAUSE ELECTRIC SHOCK.
CAUTION
ALTHOUGH SPECIAL CARE HAS BEEN TAKEN TO MINIMISE SHARP EDGES IN THE
CONSTRUCTION OF YOUR UNIT, BE EXTREMELY CAREFUL WHEN HANDLING PARTS
OR REACHING INTO THE UNIT.
Do not use water to clean the inside of the indoor unit. This can destroy insulation and cause
electrical shock.
DO NOT use chemicals or chemically treated cloths to clean the unit.
DO NOT use benzene, paint thinners, polishing powder or other solvents to clean the unit. They
can cause the plastic surface to crack or deform.
NEVER use water that is hotter than 40°C when you clean the front panel. It may cause deformation
or discolouration.
With proper maintenance and care, your Brivis system will operate economically and dependably�
Maintenance can be accomplished easily by referring to the following general directions� However, before
performing maintenance, consider these important safety precautions:

CLEANING THE AIR FILTER

The air filters require inspection and cleaning at least every two weeks. Consult your installer for location of filters
on ducted systems�
A dirty air filter will reduce the efficiency, effectiveness and air quality of your system. Failure to
clean the filters regularly can also cause condensation to form and drip from the indoor unit when
operated in cooling mode during humid conditions.
NOTE
For replacement filters, please contact Brivis.

CLEANING THE OUTDOOR UNIT

The outdoor (condensing) unit draws air into the unit and dissipates it away from the appliance� Periodic inspection
is required to ensure vegetation has not grown around the unit (plants, weeds etc�)�
The cabinet should be kept clean and have the recommended clearances maintained� Ensure the discharge air is
free to dissipate and under no circumstances recirculates back into the unit�
Ensure there is no water build up (including from condensate drain) on or around the unit�
Any unit repairs, maintenance and cleaning of the outdoor unit should be performed by an
authorised dealer or licensed service provider.
NOTE
Brivis
CARE & MAINTENANCE
9
ICE Inverter Air Conditioner OM

Advertisement

Table of Contents
loading

Table of Contents