Getting Started; Telephone Programming Buttons; Programming Overlays - Nortel M7310 Quick Programming Manual

S E C T I O N 1

Getting Started

TELEPHONE PROGRAMMING BUTTONS

You will note that your Business Series Terminal (BST) has different icons on the keycaps than the
Norstar telephones. This table shows how the icons compare between the telephones.
Button Name
Feature
Handsfree
Mute
Hold
Release
The Norstar Modular Plus Quick Programming Guide is a quick reference when you need information
about some of the more commonly-used features on this system.
For more detailed information, refer to the System Administration Guide. It contains everything needed
to gain access to and to programme the many features of the system.

PROGRAMMING OVERLAYS

Before you begin programming, you need to prepare the system. Start by placing the programming
overlay over the appropriate keys on your programming set, as shown in the diagrams below.
The T7316E, shown below, and the T7316 are the Business Series Terminals that can be used for
programming.
Business Series Terminals
T7000, T7100, T7208, T7316,
T7316E
≤
Bottom right button.(T7208)
Mute: (T7316/T7316E)
Handsfree: (T7316E)
≥˙
≥(T7000)
®
M7000, M7100N, M7208N,
M7310N, M7324N
ƒ or ƒ
©
˙or ˙
≥(M7000)
® or ™
Heading
Show
Back Next
Business
Series
Terminal
Heading Show
Back
Next
Programming
overlay
T7316E
programming
buttons
T7316
programming
buttons
5