Line Appearances - Nortel M7310 Quick Programming Manual

L i n e A c c e s s

LINE APPEARANCES

With this setting, you can programme the number of appearances a DIA line is permitted at each
extension.
• Line appearances rely on the previously described line-assignment setting, Ring Only, Appr&Ring or
Appr. only. If you choose Appr&Ring or Appr. only, there can be as many simultaneous DDI calls as
there are DIA key appearances. If Ring only is chosen, there can be as many simultaneous DDI calls
as there are intercom keys. At least one intercom key needs to remain open for outgoing calls.
• It is best to limit the number of line keys to four per extension. More line keys can be programmed
on any given extension by programming fewer on another extension. For example, choose this option
to programme 20 keys on an extension equipped with a Central Answering Position module.
ACTION
1. Begin the session by following the instructions under "To
begin a programming session" on page 9 using the System
Administrator Plus password.
2. Press ≠.
3. Enter the number of the extension that you want to programme.
We used extension 221 for this example.
4. Press ≠
5. Press ≠ twice.
6. Enter the line number. Line number 282 is used as an example.
7. Press to see the setting.
SCAN
8. Press ≠.
9. Press .
CHANGE
10. Enter 4. For our example, we have chosen to have DIA line 282
appear on extension 221 four times.
11. Press .
OK
12. Press ® to exit the session.
13. After a few seconds, the date and time reappear on the display.
16
VISUAL DISPLAY
Terminals&Extns
Show Extn#:
LIST
Show Extn#:22_
BKSP LIST
221:221
COPY FIND
Line access
COPY
Show line ....
SCAN LIST
Show line:282
SCAN BKSP LIST
L282:Appr&Ring
SCAN FIND CHANGE
Appearances:1
CHANGE
Appearances:
CANCL
Appearances:4
CANCL BKSP OK
Appearances:4
CHANGE
End of session
1 Jan 1:00 am