Boot Options Submenu - Fujitsu Primergy RX100 S3 User Manual

8.1.4 Boot Options Submenu

This submenu appears when selecting "Boot Options" from the main menu.
Use this submenu to set system startup options.
Main Advanced
POST Errors:
Keyboard Check:
SM Error Halt:
Fast Boot:
Quiet Boot:
Boot Menu:
NumLock:
MultiBoot for HDs:
Boot sequence:
F1 Help
Exit
Esc
Item
POST Errors
Keyboard Check
SM Error Halt
Fast Boot
Quiet Boot
Boot Menu
NumLock
MultiBoot for HDs
Security Server
Boot Options
[Halt On All Errors]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Auto]
[Enabled]
-/+ Change Values
Select Item
Select Menu Enter Select
table: Items on the Boot Options Submenu
Setting
Halt On All Errors
(Unchangeable)
• Disabled
• Enabled (Initial value)
Enabled (Unchangeable)
Disabled (Unchangeable)
Disabled (Unchangeable)
• Disabled
• Enabled (Initial value)
• Auto (Initial value)
• On
• Off
Enabled (Unchangeable)
PRIMERGY RX100 S3 User's Guide
Exit
Item Specific Help
Pause and displays
SETUP entry or resume
boot prompt if error
occurs on boot. If
disabled, system always
attempts to boot.
F9 Setup Defaults
Sub-Menu F7 Previous Values
Description
Sets whether or not to stop the boot process and shut down
the system, in case a POST (Power On Self Test) error is
detected.
Sets whether or not to check keyboard connection during
POST.
Sets the procedure in case an error occurs regarding the fan
or temperature sensor.
Sets whether or not to reduce the scope of POST and thereby
speed up system startup.
Sets whether or not to display the logo screen instead of
POST information.
Sets whether or not to display the boot drive selection
window after POST.
By selecting the boot drive from the [Boot Menu] window,
startup can be done from the selected boot drive regardless of
the [Boot Sequence] setting.
The state of the NumLock during activation.
Sets whether or not it is possible to specify the order of hard
disks to boot the operating system (OS) when multiple hard
disk units are installed.
8
207