Chapter 2. Basic Operation
Power Failure
Power Failure
Umbilical hanger
Circuit breaker switch
2 - 6
The printer can withstand a power interruption of up to ½ the operating
cycle without affecting operation.
During a complete power loss, the eyelid closes to prevent ink spills.
Setup parameters are saved.
When power is restored, the printer does not automatically power back
on. To turn on the printer and the fluid system, press PRINTER ON. The
power-on cycle is performed.
See your system software operator's manual for information on restarting
a job.
Warning: Flammable Material
Never expose the printer, printhead, ink, replenisher or vapor to a heat source or
ignition source.
Figure 2.2
Printer - rear view
Note: Your fluid containers make differ from those shown above. See the 7122
Printer Changing Fluid Containers document for details.