Setting Up the Printhead
Front of printhead
Rear of printhead
Print array location dot
Proper printhead setup helps to ensure print quality.
Determining Substrate Movement
Figure 1.5 illustrates normal and reverse substrate movement.
Figure 1.5
Substrate movement (7122 printhead)
Normal substrate movement
Reverse substrate movement
Locating the Print Array
To locate the position of the print array (jets) relative to the edges of the
printhead housing (covers), locate the dot indentation on the seam of the
printhead cover (see Figure 1.6). Use the location dot to correctly position
the printhead over the mailbase or transport.
Figure 1.6
Print array
Chapter 1. Getting Started
Setting Up the Printhead
1 - 7