Chapter 2. Basic Operation
Power Failure
Umbilical hanger
Circuit breaker switch
Power Failure
2 - 10
Figure 2.3
Printer - rear view
The printer can withstand a power interruption of up to ½ the operating
cycle without affecting operation.
During a complete power loss, the eyelid closes to prevent ink spills.
Setup parameters are saved.
When power is restored, the printer does not automatically power back
on. To turn on the printer and the fluid system, press [PRINTER ON]. The
power-on cycle is performed.
See your system software operator's manual for information on restarting
a job.