Ending Calls; Using Headsets - Polycom VVX 300 User Manual

Polycom® VVX® 300 and 310 Business Media Phones User Guide
To redial a number:
• From the Placed Calls list (shown next), press Dial.
Use the up and down arrow key to select the other previously placed calls.

Ending Calls

To quickly end an active call, replace the handset. Or from Lines or Calls view, press End Call.
If you're in Calls view, be sure to highlight the call first.
Note: How Do I End a Held Call?
A call must be active to end it. To end a held call: From Calls view, select the held call to
highlight it, press Resume, and then press End Call.

Using Headsets

You can connect an analog headset to your phone. If an analog headset is connected and in
use, glows green.
If you use a headset, you can set up your phone so that all calls use your headset (see
Headset Memory Mode). If you use a headset that supports electronic hookswitch (EHS), you
can press the hookswitch button to place, answer, and end calls. In addition, you may be able to
mute calls and control volume from your headset.
18
Enabling