Using Do Not Disturb With Multiple Lines; Listening To Voicemail - Polycom VVX 300 User Manual

To toggle Do Not Disturb on and off:
• From Home view, select DND. Or, if your phone is idle, press DND.

Using Do Not Disturb with Multiple Lines

By default, the Do Not Disturb feature applies to all lines on your phone. However, your phone
may be set up so that you can enable the feature on a per-line basis.
To enable or disable Do Not Disturb for a particular line:
1 From Home view, select DND.
2 From the Line Select screen, use the up and down arrow keys to select the line to enable
or disable Do Not Disturb on.
3 From the Do Not Disturb screen, select Enable or Disable.
Power Tip: Automatically Enabling or Disabling Do Not Disturb for All Lines
To automatically enable Do Not Disturb for all lines, press Set All. To automatically
disable the feature for all lines, press Clear All.

Listening to Voicemail

Your phone may indicate new voicemail messages by the following:
• A message in the status bar, as shown next. The message indicates the number of new
messages you have. The count is a total of all messages on all lines on the phone.
• A flashing Message Waiting Indicator, located at the top-right of your phone.
• An audible alert (if your phone is on-hook).
Note: Temporarily Removing Message Indicators
To temporarily remove the message counter, press
select Messages from Home view, and select Message Center) and press Clear. After a
period of time—usually about an hour or two—the message indicators will display again.
Chapter 2: Using Basic Features
, and select Message Center (or
29