Enabling Headset Memory Mode; Responding To Incoming Calls - Polycom VVX 300 User Manual

Web Info: More Information About Headsets
• For information on how to connect a headset to your phone, see the Quick Start
Guide for your phone, available by navigating to your phone from the Polycom
Business Media Phones
• For information on your headset's features, as well as how to sync your headset
with your phone, see your headset documentation.
• For a list of supported headsets, see the
Bulletin
see
documents are available on the
Polycom® Engineering Advisories and Technical Notifications

Enabling Headset Memory Mode

This feature is useful for permanent or full-time headset users. You can set up your phone so
that all incoming and outgoing calls use your headset. At any time, you can switch to handset or
speakerphone mode.
To use Headset Memory Mode, you must enable, and then activate, Headset Memory Mode.
When Headset Memory Mode is activated,
blue (for USB or Bluetooth headsets).
To enable Headset Memory Mode:
1 Select Settings from Home view, and select Basic > Preferences > Headset >
Headset Memory.
2 From the Headset Memory Mode screen, select Enabled.
3 Press .
4 To activate Headset Memory Mode, press
that the phone is in Headset Memory Mode.
Now, whenever you answer a call, the call will connect to your headset automatically.
If you switch to the speakerphone or the handset, you deactivate Headset Memory Mode. Calls
will no longer automatically go to your headset, unless you choose this mode. To have calls go
to your headset again, activate Headset Memory Mode by pressing

Responding to Incoming Calls

While your phone rings, you can do the following:
• Temporarily ignore the call before answering it.
• Reject the call so it goes directly to voicemail.
• Forward the call to another person.
Web page.
37477). For detailed information about how to use electronic hookswitch,
Using an Electronic Hookswitch (Technical Bulletin
Headset Compatibility List (Technical
Polycom® Profiled UC Software Features
flashes either green (for analog headsets) or
twice. The Headset key will flash to indicate
Chapter 2: Using Basic Features
35150). All these
and
support pages.
twice.
19