Registering The Phone - Polycom VVX 300 User Manual

If you want to...
Enter a special character
Enter a space
Delete one or more characters

Registering the Phone

Generally, your phone will be deployed with multiple other phones. In this case, your system
administrator will configure the phone parameters beforehand, so that after you set up your
phone, the phone will be registered and ready to use.
If your phone is not part of a large phone deployment, your phone may not be registered after
you set it up. Before you use your phone, you or your system administrator will have to register
it.
Web Info: How to Register Your Phone
For detailed information on how to register your phone after you install it, see
Standalone Polycom Phones (Quick Tip
Do this...
Select Encoding, and select one of the alphabetic (Abc,
ABC, or abc) options. Then, press the 1, *, 0, or # key one
or more times to enter one of the following special
characters:
• 1 key: ! | ' ^ \ @ : 1
• * key: . * - & % + ; ( )
• 0 key: / , _ $ ~ = ? 0
• # key: # > < { } [ ] " '
Note: You can't access special characters when you're in
numerical (123) mode.
Select Encoding, and select one of the alphabetic (Abc,
ABC, or abc) options. Then, press the 0 key.
Note: You can't enter a space when you're in numerical
(123) mode.
Using the left and right arrow keys until the cursor is
positioned to the right of the character(s) you want to delete.
Then, press
44011).
Chapter 1: Getting Started
.
Registering
9