Sym Mio 50 Service Manual page 167

14. Steering / Front Wheel / Front Cushion
Disc Brake Type
Remove the 2 bolts of the brake master cylinder,
and then take out the master cylinder and the split
ring.
Caution
Do not operate the front brake lever to avoid
to pressing out the brake lining when
removing the master cylinder.
Remove handle switch screw and then remove the
throttle grip, throttle cable, and handle switch
cover & seat.
With a wrench to hold the handles bolt and then
remove the nut.
Take out the handle after removed the bolt.
Installation
Install the handle according to the reverse
procedure of removal.
Apply with some grease onto the handle moving
parts when installing the handle switch seat,
throttle grip, and throttle cable.
14-4
To this chapter contents
Split ring
Handle switch screw
Handle bolt
2 bolts
Handle switch screw
Handle nut