Start System - Sym Mio 50 Service Manual

Start System

Start Circuit
Start motor
G
Start relay inspection
Turn main switch ON.
Operate the brake lever.
Press start button.
If there a click sound, the start circuit is normal.
Remove the luggage box assembly.
Disconnect the battery negative (-) terminal.
Remove the battery positive (+) connection and
start motor wires from the start relay large pin.
Remove the power control coupler of the start
relay.
Connect an Ohmmeter between the start relay
large pins.
Connect the green/yellow wire to battery positive
(+) terminal, and yellow/red to battery negative (-)
terminal.
Check the continuity between the start relay large
pins. If it is not continuity, then replace the start
relay.
To this chapter contents
R/W
Start switch
Y/R
Starter relay
16. Electrical Equipment
R
Main
Fuse
switch
Rear brake switch
B
G/Y
B
Front brake switch
Start relay
Battery
W-White
Y-Yellow
G-Green
R-Red
B-Black
16-15