Sym Mio 50 Service Manual page 112

Disassembly of Final Drive
Mechanism
HU05U
Remove the rear wheel (refer to chapter 15).
Remove the clutch.
Drain gear oil out from gear box.
Remove gear box cover and then remove the
cover and the drive shaft. (7 screws)
Remove counter shaft and gear.
Remove final driven gear and shaft.
Remove drive shaft.
Remove gasket and dowel pins.
HU10U/W
Remove the rear wheel (refer to chapter 15).
Remove the clutch.
Drain gear oil out from gear box.
Remove gear box cover and then remove the
cover and the drive shaft. (7 screws)
Remove counter shaft and gear.
Remove final driven gear and shaft.
Remove gasket and dowel pins.
To this chapter contents
HU05U
7 screws
Dowel pin
Final driven Gear
Counter shaft / gear
9. Final Drive Mechanism
Dowel pin
Final driven shaft
Final driven
shaft / Gear
Counter shaft
/ gear
Drive shaft
Gasket
9-3