Front Cover - Sym Mio 50 Service Manual

To this chapter contents
12. Body Cover

Front Cover

Removal
Remove the mounting screws (2 screws) of front
cover from the front inner cover side.
2 Screws
Remove the front mounting screw (1 screw) of the
front cover.
Push the front cover upward and then pull it
forward so that the lower mounting groove of front
cover can be separated from the front under
spoiler.
1 screw
Disconnect the headlight and position light wire
Light coupler
coupler.
Remove the front cover.
Installation
Install according to the reverse procedure of
removal.
12-3