Sym Mio 50 Service Manual page 169

14. Steering / Front Wheel / Front Cushion
Inspection
Wheel axle
Set the axle in V-blocks and measure the run-out.
Service limit: above 0.2 mm.
Wheel Rim
Place the wheel onto a rotated bracket.
Turn the wheel with hand and measure its wobble
value with a dial gauge.
Service limit:
Radial : above 0.2 mm
Axial : above 0.2 mm
Disassembly (Disc brake type)
Remove 3 socket-hex head bolts and the brake
disc.
Remove the left axle ring and dust seal.
Remove the dust seal on the right side of
speedometer gear.
Remove the bearing with the inner type bearing
remover.
Take out the bearing spacer and then remove the
other bearing.
Tool:
Inner type bearing remover SYM-6204002
14-6
To this chapter contents
Speedometer
gear dust seal
Bearing
Wheel axle
DISC BRAKE
Bearing spacer
Bearing
Wheel side collar
Dust seal