Chrysler 300M Service Manual page 136

LH
DISC BRAKE CALIPER - REAR (Continued)
(5) Support caliper assembly firmly from rear strut
to prevent weight of caliper from damaging the flex-
ible brake hose (Fig. 42).
Fig. 42 Storing Caliper
1 - FLEX HOSE
2 - STRUT
3 - WIRE HANGER
4 - CALIPER ASSEMBLY
(6) Remove the rear rotor from hub by pulling it
straight off the wheel mounting studs (Fig. 43).
DISASSEMBLY
DISASSEMBLY - CALIPER GUIDE PIN
BUSHINGS
Before disassembling the brake caliper, clean and
inspect it. Refer to CLEANING or INSPECTION in
this section.
(1) With one hand, push the guide pin bushing
sleeve towards the back of the caliper, and at the
same time, pull the sleeve out the back of the caliper
and bushing (Fig. 44).
BRAKES - BASE BRAKE SYSTEM 5 - 29
Fig. 43 Removing / Installing Rear Rotor
1 - BRAKE ROTOR (DISC)
2 - DISC SHIELD
3 - HUB
4 - DRUM-IN-HAT PARKING BRAKE
Fig. 44 Removing Sleeve From Bushing
1 - CALIPER
2 - SLEEVE
3 - BUSHING