Creating A Mykey; Programming/Changing Configurable Settings - Ford EXPLORER 2015 Owner's Manual

Hide thumbs Also See for EXPLORER 2015:
Table of Contents

Advertisement

70
• Vehicle speed minders of 45, 55 or 65 mph (75, 90 or 105 km/h). Once
you select a speed, it will be shown in the display, followed by an
audible tone when the preselected vehicle speed is exceeded.
• Audio system maximum volume of 45%. A message will be shown in the
display when you attempt to exceed the limited volume. Also, the
speed-sensitive or compensated automatic volume control will be disabled.
• Always on setting. When this is selected, you will not be able to turn
off AdvanceTrac or the do not disturb feature (if your vehicle is
equipped with these features).

CREATING A MYKEY

Use the information display to create a MyKey:
1. Insert the key you want to program into the ignition. If your vehicle is
equipped with a push-button start, place the intelligent access key in the
backup slot. The location of your backup slot is in another chapter. See
Starting and Stopping the Engine.
2. Switch the ignition on.
3. Access the main menu on the information display controls, and select
Settings, then MyKey by pressing OK or the > button.
4. Press OK or the > button to select Create MyKey.
5. When prompted, hold the OK button until you see a message informing
you to label this key as a MyKey. The key will be restricted at the next start.
MyKey is successfully created. Make sure you label it so you can
distinguish it from the admin keys.
You can also program configurable settings for the key(s). Refer to

Programming/Changing Configurable Settings.

Programming/Changing Configurable Settings
Use the information display to access your configurable MyKey settings:
1. Switch the ignition on using an admin key. If your vehicle has
push-button start, put the intelligent access key fob into the backup slot.
The location of your backup slot is in another chapter. See Starting and
Stopping the Engine
2. Access the main menu and select Settings, then MyKey by pressing
OK or the > button.
3. Use the arrow buttons to get to a configurable feature.
4. Press OK or > to scroll through settings.
2015 Explorer (exp)
Owners Guide gf, 2nd Printing, September 2014
USA (fus)
MyKey

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents