Page 1 2015 Owner’s Manual fordowner.com ford.ca September 2014 Second Printing Owner’s Manual Explorer Litho in U.S.A. FL2J 19A321 AA...
Page 2: Table Of Contents
Table of Contents Introduction Child Safety Child seat positioning ........20 Booster seats .
Page 3 Table of Contents MyKey Settings, MyKey ........69 Creating.
Page 4: Table Of Contents
Table of Contents Lighting Lighting control ........98 Autolamps .
Page 5 Table of Contents Seats Sitting in the correct position ......155 Head restraints........156 Manual seats .
Page 6: Table Of Contents
Table of Contents Four-Wheel Drive (If Equipped) Four wheel drive ........212 Brakes Brakes .
Page 7 Table of Contents Load Carrying Cargo net ......... . .264 Roof racks and load carriers .
Page 8: Table Of Contents
Table of Contents Maintenance General information ........310 Opening and closing the hood .
Page 9 Table of Contents Wheels and Tires Tire care ......... . .353 Using snow chains .
Page 10: Table Of Contents
Errors and omissions excepted. © Ford Motor Company 2014 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014...
Page 11: Introduction
Introduction ABOUT THIS MANUAL Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about it, the greater the safety and pleasure you will get from driving it.
Page 12 Introduction SYMBOL GLOSSARY These are some of the symbols you may see on your vehicle. Symbol Description Symbol Description Symbol Description Safety alert See Owner’s Anti-lock Manual braking system Avoid Battery Battery acid smoking, flames, or sparks Brake fluid – Brake system Cabin air filter...
Page 13 In order to properly diagnose and service your vehicle, Ford Motor Company, Ford of Canada, and service and repair facilities may...
Page 14 EDR. Ford Motor Company and Ford of Canada do not access event data recorder...
Page 15 If you do not want Ford or its vendors to receive this information, do not activate the service. For more information, see Traffic, Directions and Information, Terms and Conditions.
Page 16 Introduction FORD CREDIT (U.S. ONLY) Ford Credit offers a full range of financing and lease plans to help you acquire your vehicle. If you have financed or leased your vehicle through Ford Credit, thank you for your business. For your convenience, we offer a number of ways to contact us, as well as help manage your account.
Page 17 Your vehicle is not equipped with a snowplowing package. Using your vehicle as an ambulance Do not use this vehicle as an ambulance. Your vehicle is not equipped with the Ford Ambulance Preparation Package. 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014...
Page 18 Introduction MOBILE COMMUNICATIONS EQUIPMENT Using mobile communications equipment is becoming increasingly important in the conduct of business and personal affairs. However, you must not compromise your own or others’ safety when using such equipment. Mobile communications can enhance personal safety and security when appropriately used, particularly in emergency situations.
Page 19: Child Safety
NHTSA and other safety organizations, or are the minimum requirements of law. Ford recommends checking with a NHTSA Certified Child Passenger Safety Technician (CPST) and consulting your pediatrician to make sure your child seat is appropriate for your child, and is compatible with and properly installed in your vehicle.
Page 20 Child Safety Recommendations for Safety Restraints for Children Child size, height, weight, or Recommended restraint type Infants Children weighing 40 lb (18 kg) or Use a child safety seat less (generally age four or (sometimes called an toddlers younger). infant carrier, convertible seat, or toddler seat).
Page 21: Child Seat Positioning
Child Safety CHILD SEAT POSITIONING WARNING: Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the vehicle seat upon which the child seat is installed all the way back.
Page 22 Child Safety WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash. WARNING: To avoid risk of injury, do not leave children or pets unattended in your vehicle.
Page 23: Booster Seats
Child Safety BOOSTER SEATS WARNING: Never place, or allow a child to place, the shoulder belt under a child’s arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash.
Page 24 Child Safety Types of Booster Seats • Backless booster seats If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seatback or no head restraint, a backless booster seat may place your child’s head (as measured at the tops of the ears) above the top of the seat.
Page 25 Child Safety Children and booster seats vary in size and shape. Choose a booster that keeps the lap belt low and snug across the hips, never up across the stomach, and lets you adjust the shoulder belt to cross the chest and rest snugly near the center of the shoulder.
Page 26: Installing Child Seats
Child Safety INSTALLING CHILD SEATS Child Seats Use a child safety seat (sometimes called an infant carrier, convertible seat, or toddler seat) for infants, toddlers or children weighing 40 pounds (18 kilograms) or less (generally age four or younger). Using Lap and Shoulder Belts WARNING: Airbags can kill or injure a child in a child seat.
Page 27 Child Safety • Keep the buckle release button pointing up and away from the safety seat, with the tongue between the child seat and the release button, to prevent accidental unbuckling. • Place the vehicle seat upon which the child seat will be installed in the upright position.
Page 28 Child Safety 2. After positioning the child safety seat in the proper seating position, do the following: • Standard safety belt: pull down on the shoulder belt and then grasp the shoulder belt and lap belt together behind the belt tongue.
Page 29 Child Safety 4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until you hear a snap and feel the latch engage. Make sure the tongue is latched securely by pulling on it.
Page 30 Child Safety • Inflatable safety belt: grasp the lap portion of the inflatable safety belt and pull upward until all of the belt is pulled out. Note: Unlike the standard safety belt, the inflatable safety belt’s unique lap portion locks the child seat for installation.
Page 31 1 inch (2.5 centimeters) of movement for proper installation. Ford recommends checking with a NHTSA Certified Child Passenger Safety Technician to make certain the child restraint is properly installed. In Canada, check with your local St. John Ambulance office for referral to a Child Passenger Safety Technician.
Page 32 Child Safety Using Lower Anchors and Tethers for CHildren (LATCH) WARNING: Never attach two child safety seats to the same anchor. In a crash, one anchor may not be strong enough to hold two child safety seat attachments and may break, causing serious injury or death.
Page 33 Child Safety • Second-row bench seats and third-row passenger side The LATCH anchors are located at the rear section of the rear seat between the cushion and seat back below the symbols as shown. Follow the child seat manufacturer’s instructions to properly install a child seat with LATCH attachments.
Page 34 Child Safety Each time you use the safety seat, check that the seat is properly attached to the lower anchors and tether anchor, if applicable. Tug the child seat from side to side and forward and back where it is secured to your vehicle.
Page 35 Child Safety • Second-row bench seats and third-row passenger side Perform the following steps to install a child safety seat with tether anchors: Note: If you install a child seat with rigid LATCH attachments, do not tighten the tether strap enough to lift the child seat off your vehicle seat cushion when the child is seated in it.
Page 36 Child Safety 2. Locate the correct anchor for the selected rear seating position. • Second-row bucket (40/40) • Second-row bench (60/40) • Third-row seat Note: The cargo tie-downs at the rear edge of the floor are not tether anchors. 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)
Page 37 If the safety seat is not anchored properly, the risk of a child being injured in a crash greatly increases. If your child restraint system is equipped with a tether strap, and the child restraint manufacturer recommends its use, Ford also recommends its use. 2015 Explorer (exp)
Page 38: Child Safety Locks
Child Safety CHILD SAFETY LOCKS When these locks are set, the rear doors cannot be opened from the inside. The childproof locks are located on the rear edge of each rear door and must be set separately for each door. •...
Page 39: Safety Belts
Safety Belts PRINCIPLES OF OPERATION WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: Never let a passenger hold a child on his or her lap while the vehicle is moving. The passenger cannot protect the child from injury in a crash, which may result in serious injury or death.
Page 40 Safety Belts WARNING: When possible, all children 12 years old and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injury or death. WARNING: Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather;...
Page 41: Fastening The Safety Belts
Safety Belts FASTENING THE SAFETY BELTS The front outboard and rear safety restraints in your vehicle are combination lap and shoulder belts. 1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch.
Page 42 Safety Belts Pregnant women should always wear their safety belts. The lap belt portion of a combination lap and shoulder belt should be positioned low across the hips below the belly and worn as tight as comfort will allow. The shoulder belt should be positioned to cross the middle of the shoulder and the center of the chest.
Page 43 Safety Belts Automatic Locking Mode In this mode, the shoulder belt or lap belt is automatically pre-locked. The belt will still retract to remove any slack in the shoulder or lap belt. The automatic locking mode is not available on the driver safety belt. When to Use the Automatic Locking Mode This mode should be used any time a child safety seat, except a booster, is installed in passenger front or rear seating positions.
Page 44: Safety Belt Height Adjustment
Safety Belts Safety Belt Extension Assembly WARNING: Do not use extensions to change the fit of the shoulder belt across the torso. WARNING: Do not use extensions with an inflatable safety belt. Safety belt extensions are vehicle-specific. See an authorized dealer to make sure you obtain the proper safety belt extension for your vehicle.
Page 45: Safety Belt Warning Light And Indicator Chime
Safety Belts SAFETY BELT WARNING LIGHT AND INDICATOR CHIME This lamp illuminates and an audible warning will sound if the driver’s safety belt has not been fastened when the vehicle’s ignition is turned on. Conditions of Operation If... Then... The driver safety belt is not The safety belt warning light buckled before the ignition switch illuminates 1-2 minutes and the...
Page 46 Safety Belts If... Then... You or the front seat passenger do The Belt-Minder feature activates, the not buckle your safety belts before safety belt warning light illuminates your vehicle reaches at least and a warning tone sounds for 6 mph (9.7 km/h) and 1-2 minutes 6 seconds every 25 seconds, repeating elapse after you switch the for about 5 minutes or until you and...
Page 47: Rear Inflatable Safety Belt
Safety Belts 3. Wait 10 seconds after the safety belt warning light turns off. • Step 4 must be completed within 20 seconds after the completion of Step 3. 4. For the seating position being disabled, buckle then unbuckle the safety belt three times at a moderate speed, ending in the unbuckled state.
Page 48 Safety Belts How Does the Rear Inflatable Safety Belt System Work? WARNING: If the rear inflatable safety belt has deployed, it will not function again. The rear inflatable safety belt system must be replaced by an authorized dealer. • The rear inflatable safety belts will function like standard restraints in everyday usage.
Page 49: Child Restraint And Safety Belt Maintenance
Ford Motor Company recommends that all safety belt assemblies in use in vehicles involved in a crash be replaced. However, if the crash was minor and an authorized dealer finds that the belts do not show damage and continue to operate properly, they do not need to be replaced.
Page 50: Personal Safety System
Personal Safety System PERSONAL SAFETY SYSTEM™ The Personal Safety System provides an improved overall level of frontal crash protection to front seat occupants and is designed to help further reduce the risk of airbag-related injuries. The system is able to analyze different occupant conditions and crash severity before activating the appropriate safety devices to help better protect a range of occupants in a variety of frontal crash situations.
Page 51: Supplementary Restraints System
Supplementary Restraints System PRINCIPLES OF OPERATION WARNING: Airbags do not inflate slowly or gently, and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module. WARNING: All occupants of your vehicle, including the driver, should always properly wear their safety belts, even when an airbag supplemental restraint system is provided.
Page 52 Supplementary Restraints System WARNING: If the airbag has deployed, the airbag will not function again and must be replaced immediately. If the airbag is not replaced, the unrepaired area will increase the risk of injury in a crash. The airbags are a supplemental restraint system and are designed to work with the safety belts to help protect the driver and right front passenger from certain upper body injuries.
Page 53: Driver And Passenger Airbags
Supplementary Restraints System DRIVER AND PASSENGER AIRBAGS WARNING: Never place your arm or any objects over an airbag module. Placing your arm over a deploying airbag can result in serious arm fractures or other injuries. Objects placed on or over the airbag inflation area may cause those objects to be propelled by the airbag into your face and torso causing serious injury.
Page 54 Supplementary Restraints System • Recline the seat slightly (one or two degrees) from the upright position. After all occupants have adjusted their seats and put on safety belts, it is very important that they continue to sit properly. Properly seated occupants sit upright, lean against the seat back, and center themselves on the seat cushion, with their feet comfortably extended on the floor.
Page 55: Front Passenger Sensing System
Supplementary Restraints System FRONT PASSENGER SENSING SYSTEM WARNING: Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injury or death. WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the front passenger sensing system, resulting in serious injury or death in a crash.
Page 56 Supplementary Restraints System The front passenger sensing system is designed to disable (will not inflate) the front passenger’s frontal airbag when the front passenger seat is unoccupied, or when a rear-facing infant seat, a forward-facing child restraint, or a booster seat is detected. Even with this technology, parents are strongly encouraged to always properly restrain children in the rear seat.
Page 57 If it is necessary to modify an advanced front airbag system to accommodate a person with disabilities, contact the Ford Customer Relationship Center at the phone number shown in the Getting the services you need section of the Customer Assistance chapter, or see your authorized dealer.
Page 58: Side Airbags
Supplementary Restraints System SIDE AIRBAGS WARNING: Do not place objects or mount equipment on or near the airbag cover, on the side of the seatbacks (of the front seats), or in front seat areas that may come into contact with a deploying airbag.
Page 59: Safety Canopy Curtain Airbags
Supplementary Restraints System The system consists of the following: • A tag on the seatback indicating that side airbags are found on your vehicle. • Side airbags located inside the seatback of the driver and front passenger seats. • Front passenger sensing system. •...
Page 60 Supplementary Restraints System WARNING: All occupants of your vehicle including the driver should always wear their safety belts even when an airbag supplemental restraint system and curtain airbag is provided. Failure to properly wear your safety belt could seriously increase the risk of injury or death.
Page 61: Crash Sensors And Airbag Indicator
Supplementary Restraints System Children 12 years old and under should always be properly restrained in the rear seats. The Safety Canopy will not interfere with children restrained using a properly installed child or booster seat because it is designed to inflate downward from the headliner above the doors along the side window opening.
Page 62: Airbag Disposal
Supplementary Restraints System If any of these things happen, even intermittently, have the supplemental restraint system serviced at an authorized dealer immediately. Unless serviced, the system may not function properly in the event of a crash. The safety belt pretensioners, rear inflatable safety belts and the airbag supplemental restraint system are designed to activate when the vehicle sustains frontal or sideways deceleration sufficient to cause the restraints control module to deploy a safety device or when a certain likelihood of...
Page 63: Keys And Remote Control
Keys and Remote Control GENERAL INFORMATION ON RADIO FREQUENCIES This device complies with part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 64: Remote Control
Keys and Remote Control REMOTE CONTROL Integrated Keyhead Transmitters (IKTs) (If Equipped) Use the key blade to start your vehicle and unlock or lock the driver door from outside your vehicle. The transmitter portion functions as the remote control. Note: Your vehicle’s keys came with a security label that provides important key cut information.
Page 65 Keys and Remote Control Replacing the Battery Note: Refer to local regulations when disposing of transmitter batteries. Note: Do not wipe off any grease on the battery terminals or on the back surface of the circuit board. Note: Replacing the battery will not delete the transmitter from your vehicle.
Page 66 Keys and Remote Control 3. Remove the old battery. 4. Insert a new battery with the + facing downward. Press the battery down to make sure it is fully in the housing. 5. Snap the battery cover back onto the transmitter and install the backup key.
Page 67 Keys and Remote Control Deactivating Memory from the Remote Control 1. Press and hold the desired memory button for five seconds. You will hear a tone in about two seconds. Continue to hold until you hear a second tone. 2. Press the unlock button on the remote control. 3.
Page 68 Keys and Remote Control The remote start system will not work if: • the ignition is on • the alarm system is triggered • you disable the feature • the hood is open • the transmission is not in P •...
Page 69: Replacing A Lost Key Or Remote Control
Keys and Remote Control Extending the Vehicle Run Time Repeat Steps 1 and 2 with your vehicle still running to extend the run time for another remote start duration. If the duration is set to last 10 minutes, the duration will extend by another 10 minutes beginning after what is left of the first activation time.
Page 70: Mykey
MyKey PRINCIPLES OF OPERATION MyKey allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys programmed to the vehicle can be activated with these restricted modes. Any keys that have not been programmed are referred to as administrator keys or admin keys.
Page 71: Creating
MyKey • Vehicle speed minders of 45, 55 or 65 mph (75, 90 or 105 km/h). Once you select a speed, it will be shown in the display, followed by an audible tone when the preselected vehicle speed is exceeded. •...
Page 72: Clearing
MyKey is not compatible with non-Ford-approved aftermarket remote start systems. If you choose to install a remote start system, please see your Ford authorized dealer for a Ford-approved remote start system. 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014...
Page 73 MyKey MYKEY TROUBLESHOOTING Condition Potential causes • The key or fob used to start the vehicle I cannot create a MyKey. does not have admin privileges. • The key or fob used to start the vehicle is the only admin key (there always has to be at least one admin key).
Page 74: Locks
Locks LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lock and unlock your vehicle. Power Door Locks The power door lock control is located on the driver and front passenger door panels. A.
Page 75 Locks Note: If any door or the luggage compartment is open, or if the hood is open on vehicles with an anti-theft alarm or remote start, the horn sounds twice and the lamps will not flash. Power Liftgate (If Equipped) WARNING: Make sure all persons are clear of the liftgate area before using power liftgate control.
Page 76 Locks At the Liftgate Press the exterior liftgate release button on the top of the liftgate pull-cup handle. Smart Unlocks for Integrated Keyhead Transmitter This feature helps to prevent you from locking yourself out of your vehicle if your key is still in the ignition. When you open one of the front doors and lock your vehicle with the power door lock control, all the doors will lock then unlock if your key is still in the ignition.
Page 77 Locks Autolock Feature (If Enabled) The autolock feature will lock all the doors when: • all the doors are closed, • the ignition is on, • you shift into any gear putting your vehicle in motion, and • your vehicle reaches a speed greater than 12 mph (20 km/h). The autolock feature repeats when: •...
Page 78 Locks Illuminated Entry The interior lamps and select exterior lamps illuminate when you use the integrated keyhead transmitter, intelligent access key or the keyless entry keypad to unlock the vehicle. The system will turn off the lights if: • you switch the ignition on •...
Page 79 Locks LIFTGATE WARNING: Do not allow people to travel in any area of your vehicle that does not have seats and safety belts. Riding in a cargo area, inside or outside of the vehicle, is extremely dangerous. In a crash, people riding in these areas are more likely to be seriously injured or killed.
Page 80 Locks Power Liftgate (If Equipped) WARNING: Make sure all persons are clear of the power liftgate area before using the power liftgate control. WARNING: Keep keys out of reach of children. Do not allow children to play near an open or moving power liftgate. Note: Cycling the ignition while the liftgate is power closing and is near the latch may cause the liftgate to reverse to full open position.
Page 81 Locks To open or close from the instrument panel: Press the instrument panel button. To open or close with the remote control: Press the remote control button twice within three seconds. To open with the outside liftgate control button: 1. Unlock the liftgate with the remote control or power door unlock control.
Page 82 Locks The new open liftgate height will now be recalled when the power liftgate is opened. To change the programmed height, repeat the above procedure. Once you open the power liftgate you can manually move it to a different height. When operating the power liftgate after a set height lower than full-open is set, you can fully open the liftgate by manually pushing it upward to the maximum open position.
Page 83 Locks SECURICODE™ KEYLESS ENTRY KEYPAD (IF EQUIPPED) The keypad, located near the driver window, is invisible until touched and then it lights up so you can see and touch the appropriate buttons. Note: If you enter your entry code too fast on the keypad, the unlock function may not work.
Page 84 Locks 5. The doors will lock and then unlock to confirm that programming is complete. You may also program a personal entry code through the MyFord Touch or MyLincoln Touch system. Refer to the MyFord Touch or MyLincoln Touch chapter. Tips: •...
Page 85 Locks Unlocking and Locking the Doors To unlock the driver door: Enter the factory-set 5-digit code or your personal code. You must press each number within five seconds of each other. The interior lamps will illuminate. Note: All doors will unlock if the two-stage unlocking feature is disabled.
Page 86: Security
Security SECURILOCK® PASSIVE ANTI-THEFT SYSTEM Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection. Note: Metallic objects, electronic devices or a second coded key on the same key chain may cause vehicle starting issues if they are too close to the key when starting your vehicle.
Page 87 Security If your programmed transmitters or standard SecuriLock coded keys (integrated keyhead transmitters only) are lost or stolen and you do not have an extra coded key, you will need to have your vehicle towed to an authorized dealer. The key codes need to be erased from your vehicle and new coded keys will need to be programmed.
Page 88 Security 8. Switch the ignition from off to on. Keep the ignition on for at least six seconds until you hear the door locks cycle . 9. Remove the newly programmed coded key from the ignition. The key will start the engine and will operate the remote entry system (if the new key is an integrated keyhead transmitter) if it has been successfully programmed.
Page 89: Anti-Theft Alarm
Security 5. Press and release the brake pedal one time. The indicator on the START/STOP button should begin to flash rapidly. This indicates the vehicle is in programming mode and that it has detected two programmed intelligent access keys in the vehicle. 6.
Page 90 Security Disarming the Alarm To disarm the alarm, do any of the following: • Press the power door unlock button within the 20-second pre-armed mode. • Press the unlock button on the remote control. • Unlock the doors with the keyless entry pad. •...
Page 91: Steering Wheel
Steering Wheel ADJUSTING THE STEERING WHEEL WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position in the Seats chapter. 1. Unlock the steering column. 2.
Page 92 Steering Wheel Power Tilt and Telescope Steering Column (If Equipped) WARNING: Do not adjust the steering wheel when your vehicle is moving. Note: Make sure that you are sitting in the correct position. Refer to Sitting in the Correct Position in the Seats chapter. Use the control on the side of the steering column to adjust the position.
Page 93 Steering Wheel To reset the steering column to its original stopping position: 1. Be sure that there is nothing blocking the motion of the steering column or wheel. 2. Press and hold the steering column control until the steering column stops moving.
Page 94 Steering Wheel CRUISE CONTROL Type 1 Type 2 CNCL See the Cruise Control chapter for information on this feature. 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)
Page 95 Steering Wheel INFORMATION DISPLAY CONTROL See the Information Displays chapter for more information. Cluster Display Control Features If equipped with: MyFord system: This control functions the same as the center control on the faceplate. See MyFord system in the Audio Systems chapter.
Page 96: Pedals
Pedals ADJUSTABLE PEDALS (IF EQUIPPED) WARNING: Never adjust the accelerator and brake pedal with feet on the pedals while the vehicle is moving. The control is located on the left side of the steering column. Press and hold the appropriate control to move the pedals. A.
Page 97: Wipers And Washers
Wipers and Washers WINDSHIELD WIPERS Note: Fully defrost the windshield in icy conditions before turning on the windshield wipers. Note: Make sure the windshield wipers are switched off before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears.
Page 98: Windshield Washers
Wipers and Washers Keep the outside of the windshield clean, especially the area around the interior mirror where the sensor is located, or sensor performance may be affected. WINDSHIELD WASHERS Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out.
Page 99: Lighting Control
Lighting LIGHTING CONTROL A. Off B. Parking lamps, instrument panel lamps, license plate lamps and tail lamps C. Headlamps High Beams Push the lever forward to switch the high beams on. Push the lever forward again or pull the lever toward you to switch the high beams off.
Page 100: Autolamps
Lighting AUTOLAMPS WARNING: The daytime running lamps system does not activate the tail lamps and may not provide adequate lighting during low visibility driving conditions. Also, the autolamps switch position may not activate the headlamps in all low visibility conditions, such as daytime fog.
Page 101: Instrument Lighting Dimmer
Lighting INSTRUMENT LIGHTING DIMMER Press repeatedly or press and hold until the desired level is reached. Note: In the uplevel message center only, a message will pop up that will show incrementally where the dimmer is in relation to the dimming steps.
Page 102: Daytime Running Lamps
Lighting DAYTIME RUNNING LAMPS (IF EQUIPPED) WARNING: Always remember to turn on your headlamps at dusk or during inclement weather. The Daytime Running Lamp (DRL) system does not activate the tail lamps and generally may not provide adequate lighting during these conditions. Failure to activate your headlamps under these conditions may result in a collision.
Page 103 Lighting A camera sensor is centrally mounted behind the windshield of the vehicle, and monitors the conditions to decide when to switch the high beams off and on. Once the system is active the high beams will switch on if: •...
Page 104: Front Fog Lamps
Lighting Manually overriding the system When the automatic control has activated high beams, pushing or pulling the stalk will provide a temporary override to low beam. To permanently deactivate the system use the information display menu or turn the lighting control switch from autolamps to headlamps. FRONT FOG LAMPS The fog lamps can be turned on when the lighting control is in the headlamps, parking...
Page 105: Interior Lamps
Lighting INTERIOR LAMPS Dome Lamp Control Without fog lamps With fog lamps Use to manually turn the dome lamp on. • Press the control. This will turn on the interior courtesy lights. The lights will remain on until the control is pressed again. 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)
Page 106 Lighting Front Row Map Lamps (If Equipped) To turn on the map lamps, press the outer edge of the clear lens. The front row map lamp lights when: • any door is opened. • the dome lamp button on the instrument panel is activated.
Page 107 Lighting Third row cargo lamp The dome lamp lights when: • any door is opened. • the instrument panel dimmer button is pressed until the courtesy lamp comes on. • any of the remote entry controls are pressed and the ignition is off.
Page 108: Power Windows
Windows and Mirrors POWER WINDOWS WARNING: Do not leave children unattended in your vehicle and do not let children play with the power windows. They may seriously injure themselves. WARNING: When closing the power windows, you should verify they are free of obstructions and make sure that children and pets are not in the proximity of the window openings.
Page 109: Windows And Mirrors
Windows and Mirrors Window Lock Press the control to lock or unlock the rear window controls. Bounce-Back The window will stop automatically while closing and reverse some distance if there is an obstacle in the way. Overriding the Bounce-Back Feature WARNING: When you override the bounce-back feature the window will not reverse if it detects an obstacle.
Page 110: Exterior Mirrors
Windows and Mirrors EXTERIOR MIRRORS Power Exterior Mirrors WARNING: Do not adjust the mirror while your vehicle is in motion. A. Left mirror B. Adjustment control C. Right mirror To adjust your mirrors: 1. Press the button to select the mirror you want to adjust. An indicator light on the button will illuminate.
Page 111 Windows and Mirrors Press the button to fold the mirrors in or out. A mirror may also be manually folded by pulling it toward the door window glass. This may cause the mirror to appear loose and it will need to be re-synchronized.
Page 112 Windows and Mirrors Integrated Blind Spot Mirrors (If Equipped) WARNING: Objects in the blind spot mirror are closer than they appear. Blind spot mirrors have an integrated convex mirror built into the upper outboard corner of the exterior mirrors. They are designed to assist you by increasing visibility along the side of your vehicle.
Page 113: Sun Visors
Windows and Mirrors INTERIOR MIRROR WARNING: Do not adjust the mirror when your vehicle is moving. Note: Do not clean the housing or glass of any mirror with harsh abrasives, fuel or other petroleum or ammonia based cleaning products. You can adjust the interior mirror to your preference. Some mirrors also have a second pivot point.
Page 114: Moonroof
Windows and Mirrors Illuminated Visor Vanity Mirror (If Equipped) Lift the cover to switch on the lamp. DUAL PANEL MOONROOF AND POWER SUNSCREEN (IF EQUIPPED) WARNING: Do not let children play with the moon roof or leave children unattended in the vehicle. They may seriously hurt themselves.
Page 115 Windows and Mirrors Opening and Closing the Moonroof Press and release the SLIDE control to open the moonroof. The sunscreen, if closed, will automatically open prior to opening the moonroof. The moonroof will stop short of the fully opened position. Note: This position helps to reduce rumbling wind noise which may happen with the roof fully open.
Page 116: Gauges
Instrument Cluster GAUGES Type 1 Cluster shown in standard measure – metric clusters similar. A. Tachometer B. Information display. See Information displays for more information. C. Speedometer D. Fuel gauge Fuel Gauge Note: The fuel gauge may vary slightly when your vehicle is moving or on a gradient.
Page 117: Instrument Cluster
Instrument Cluster • The fuel amount dispensed into the tank is a little less or more than the gauge indicated. This is normal and depends upon the slope of pavement at the gas station. • If the gas station nozzle shuts off before the tank is full, try a different gas pump nozzle.
Page 118: Warning Lamps And Indicators
Instrument Cluster WARNING LAMPS AND INDICATORS There are indicators that can alert you to a vehicle condition that may become serious enough to cause expensive repairs. Many lights will illuminate when you start your vehicle to make sure they work. If any light remains on after starting the vehicle, refer to the respective system warning light for additional information.
Page 119 Instrument Cluster Brake system warning light To confirm the brake system warning light is functional, it will momentarily illuminate when the ignition is turned to the on position when the engine is not running, or in a position between on and start, or by applying the parking brake when the ignition is turned to the on position.
Page 120 Instrument Cluster Fog lamps Illuminates when the fog lamps are turned on. Grade assist (RTT) (if equipped) Illuminates when grade assist is turned on. Heads up display (if equipped) A red beam of lights will illuminate on the windshield in certain instances when using adaptive cruise control and/or the collision warning system.
Page 121 Instrument Cluster Low washer fluid (RTT) Illuminates when the windshield washer fluid is low. Parking Lamps (RTT) It will illuminate when you switch the parking lamps on. Powertrain malfunction/reduced power Illuminates when a powertrain or an 4WD fault has been detected.
Page 122 Instrument Cluster Speed control (RTT) (if equipped) The speed control system indicator light changes color to indicate what mode the system is in: • On (gray light–type 1 and type 2): Illuminates when the speed control system is turned on. Turns off when the speed control system is turned off.
Page 123: Audible Warnings And Indicators
Instrument Cluster AUDIBLE WARNINGS AND INDICATORS Key In Ignition Warning Chime Sounds when the key is left in the ignition in the off or accessory position and the driver’s door is opened. Keyless Warning Alert (If Equipped) Sounds the horn twice when you exit your vehicle with the intelligent access key, after the last door is closed and your keyless vehicle is in RUN, indicating your vehicle is still on.
Page 124: Controls
Information Displays GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
Page 125: Information Displays
Information Displays Menu You can access the menus using the information display control. Note: Some options may appear slightly different or not at all if the items are optional. †Trip 1 & 2 Distance to E Trip Odometer Trip Timer Inst Fuel Econ Average Fuel Fuel Used...
Page 126 Information Displays Settings Driver Assist Traction Ctrl — check enabled (default) / uncheck disabled Blind Spot — check enabled (default) / uncheck disabled Collision Warning Sensitivity (if High, Normal or MyKey is programmed) Cross Traffic — check enabled (default) / uncheck disabled Cruise Control Adaptive or Normal...
Page 127 Information Displays Settings Convenience Auto Highbeam — check enabled (default) / uncheck disabled Autolamp Delay Off or number of seconds Compass Display Display — check enabled (default) / uncheck disabled Calibrate Hold OK to calibrate Circle slowly to calibrate Calibration complete Zone Zone 1 —...
Page 128: Trip Computer
Information Displays Settings MyKey Create MyKey Hold OK to Create MyKey 911 Assist Always On / User Selectable Traction Control Always On or User Selectable Max Speed 80 MPH (130 km/h) or Off Speed Warning 45 mph (75 km/h), 55 mph (90 km/h), 65 mph (105 km/h) or Off Volume Limiter Do Not Disturb...
Page 129 Information Displays Information Display Controls (Type 2) • Press the up and down arrow buttons to scroll through and highlight the options within a menu. • Press the right arrow button to enter a sub-menu. • Press the left arrow button to exit a menu.
Page 130 Information Displays Display mode †Option 1 Option 2 Option 3 †Option 4 Intelligent 4WD Fuel gauge Always Always Always Always Present Present Present Present Total odometer (lower Always Always Always Always left corner) Present Present Present Present †Vehicles with Intelligent 4WD only. You can choose to have only the fuel gauge show in this mode.
Page 131 Information Displays Trip 1 & 2 Choose between the following trip displays. Trip 1 & 2 Trip distance Average fuel economy Trip 1 & 2 Elapsed trip time Hold OK to Reset Estimated amount of fuel consumed Total odometer (lower left corner) Press and hold OK to reset the currently displayed trip information.
Page 132 Information Displays Driver Assist In this mode, you can configure different driver assist setting choices. Note: Some items are optional and may not appear. Driver Assist Traction Control — check enabled (default) / uncheck disabled Blindspot — check enabled (default) / uncheck disabled Collision Warning Sensitivity High / Normal / Low Cross Traffic —...
Page 133 Information Displays Settings In this mode, you can configure different driver setting choices. Note: Some items are optional and may not appear. Settings Vehicle DTE Calculation Normal / Towing Easy Entry/Exit — check enabled / uncheck disabled Lighting Auto highbeam On / Off Autolamp Delay Off or number of...
Page 134: Information Messages
Information Displays Settings (cont’d) *MyKey MyKey Status MyKeys / Admin Keys Create MyKey Hold OK to Create MyKey 911 Assist Always On / User Selectable Traction Always On / User Selectable Control Max Speed Choose desired speed or off Speed Choose desired speed or off Warning Volume...
Page 135 Information Displays Adaptive Cruise Action / Description Control Messages Adaptive Cruise Displayed when a radar malfunction is Malfunction preventing the ACC from engaging. Adaptive Cruise Not Displayed when conditions exist such that the Available adaptive cruise cannot function properly. Adaptive Cruise Not Displayed when the radar is blocked because Available Sensor of poor radar visibility due to bad weather or...
Page 136 Information Displays AWD/4WD Messages Action / Description AWD Off Displayed when the system has been automatically disabled to protect itself. This is caused by operating the vehicle with the compact spare tire installed or if the system is overheating. The system will resume normal function and clear this message after driving a short distance with the road tire re-installed or after the system is allowed to cool.
Page 137 Information Displays Battery and Action / Description Charging System Messages Transport Mode Contact your authorized dealer as soon as Contact Dealer possible. Factory Mode Contact Contact your authorized dealer as soon as Dealer possible. Low Battery Features Displayed when the battery management Tempor.
Page 138 Information Displays Brake System Action / Description Messages Brake Fluid Level Low Indicates the brake fluid level is low and the brake system should be inspected immediately. Check Brake System Displayed when the brake system needs servicing. If the warning stays on or continues to come on, contact your authorized dealer as soon as possible.
Page 139 Information Displays Door Messages Action / Description X Door Ajar Displayed when a door is not completely closed. Liftgate Ajar Displayed when the liftgate is not completely closed. Driver Alert Action / Description Messages Driver Alert Warning Stop and rest as soon as it is safe to do so. Rest Now Driver Alert Warning Take a rest break soon.
Page 140 Information Displays Keys and Intelligent Action / Description Access Messages Press Brake to Start Displayed when the start/stop button is pressed without the brake pedal being applied. This is a reminder that the brake pedal must be applied when the start/stop button is pressed in order to start the engine.
Page 141 Information Displays Maintenance Action / Description Messages LOW Engine Oil Stop the vehicle as soon as safely possible, Pressure turn off the engine. Check the oil level. If the warning stays on or continues to come on with your engine running, contact your authorized dealer as soon as possible.
Page 142 Information Displays MyKey® Messages Action / Description Vehicle Near MyKey Displayed when a MyKey® is in use and the Top Speed MyKey speed limit is on and the vehicle speed is 80 mph (130 km/h). Vehicle Near MyKey Displayed when a MyKey® is in use and the Top Speed MyKey speed limit is on and the vehicle speed is approaching 80 mph (130 km/h).
Page 143 Information Displays Reminder Messages Action / Description Steering Lock Turn Displays when you need to turn the steering Wheel to Unlock wheel in order to disengage the steering lock. Shift to Park Displays as a reminder to shift into park if gear shift lever is not in park and a door is opened.
Page 144 Information Displays Terrain Management / Action / Description Off Road / Hill Descent Messages Normal Mode Active Displays terrain management normal mode is currently active. Terrain Management Displays driver selected terrain management Snow Mode snow, grass, gravel mode. Snow, Gravel, Grass Displays terrain management snow, gravel, grass Mode Active mode is currently active.
Page 145: Climate Control
Climate Control MANUAL CLIMATE CONTROL A. Power: Press the button to turn the system on and off. Switching off the climate control system prevents outside air from entering the vehicle. B. Air distribution control: Press these buttons to turn airflow from the windshield, instrument panel, or footwell vents on or off.
Page 146 Climate Control E. MAX A/C: Turn the temperature control dial all the way past the full cool position to maximize cooling. Recirculated air flows through the instrument panel vents, air conditioning automatically turns on, and the fan automatically adjusts to the highest speed. F.
Page 147 Climate Control AUTOMATIC CLIMATE CONTROL (WITH SONY® AUDIO SYSTEM) Note: You can switch temperature units between Fahrenheit and Celsius. See Menu features in the MyFord Touch or MyLincoln Touch chapter. A. CLIMATE: Press the button to turn the system on and off. Switching off the climate control system prevents outside air from entering the vehicle.
Page 148 Climate Control E. A/C: Press the button to turn air conditioning compressor on or off. Use air conditioning with recirculated air to improve cooling performance and efficiency. F. MAX A/C: Press the button to maximize cooling. Recirculated air flows through the instrument panel vents, air conditioning automatically turns on, and the fan automatically adjusts to the highest speed.
Page 149 Climate Control AUTOMATIC CLIMATE CONTROL (WITH MyTemp) DUAL TEMP AUTO Note: You can switch temperature units between Fahrenheit and Celsius. See Settings in the MyFord Touch or MyLincoln Touch chapter. A. MyTemp: Allows you to quickly adjust to a frequently used setting with a single touch.
Page 150 Climate Control F. A/C: Press the button to turn air conditioning compressor on or off. Use air conditioning with recirculated air to improve cooling performance and efficiency. G. AUTO: Press the button to turn on automatic operation. Select the desired temperature using the temperature control. The system adjusts fan speed, air distribution, air conditioning operation, and selects outside air or recirculated air to heat or cool the vehicle in order to maintain the desired temperature.
Page 151 Climate Control GENERAL OPERATING TIPS General Hints Note: Prolonged use of recirculated air may cause the windows to fog Note: You may feel a small amount of air from the footwell air vents regardless of the air distribution setting. Note: To reduce humidity build-up inside your vehicle, do not drive with the system switched off or with recirculated air always switched on.
Page 152 Climate Control Heating the Interior Quickly Vehicles with manual climate Vehicles with automatic control climate control Adjust the fan speed to the Press the AUTO button. highest speed setting. Adjust the temperature control Adjust the temperature control to the highest setting. to the desired setting.
Page 153 Climate Control Recommended Settings for Cooling Vehicles with manual climate Vehicles with automatic control climate control Adjust the fan speed to the Press the AUTO button. center setting. Adjust the temperature control Adjust the temperature control to the midway point of the cold to the desired setting.
Page 154: Cabin Air Filter
Climate Control HEATED WINDOWS AND MIRRORS (IF EQUIPPED) Heated Rear Window Note: The ignition must be switched on to use this feature. Press the button to clear the rear window of thin ice and fog. Press the button again within 10 minutes to switch it off. It switches off automatically after 10 minutes, or when you switch the ignition off.
Page 155: Remote Start
Climate Control REMOTE START (IF EQUIPPED) The remote start feature allows you to pre-condition the interior of your vehicle. The climate control system works to achieve comfort according to your previous settings. Note: You cannot adjust the system during remote start operation. Turn the ignition on to return the system to its previous settings.
Page 156: Seats
Seats SITTING IN THE CORRECT POSITION WARNING: Sitting improperly out of position or with the seat back reclined too far can take off weight from the seat cushion and affect the decision of the passenger sensing system, resulting in serious injury or death in a crash. Always sit upright against your seat back, with your feet on the floor.
Page 157: Head Restraints
Seats • Hold the steering wheel with your arms slightly bent. • Bend your legs slightly so that you can press the pedals fully. • Position the shoulder strap of the safety belt over the center of your shoulder and position the lap strap tightly across your hips. Make sure that your driving position is comfortable and that you can maintain full control of your vehicle.
Page 158 Seats To adjust the head restraint, do the following: Front seat head restraints Second-row center seat head restraint (if equipped) The head restraints consist of: A. Energy absorbing head restraint. B. Steel stems. C. Guide sleeve adjust and release button. D.
Page 159 Seats Second-row outboard seat head restraints The head restraints consist of: A. Energy absorbing head restraint. B. Steel stems. C. Guide sleeve unlock and remove buttons. D. Fold strap. • Fold: Pull the fold strap (D). Pull it back up to reset. •...
Page 160: Manual Seats
Seats Tilting Head Restraints (If Equipped) The front head restraints may tilt for extra comfort. To tilt the head restraint, do the following: 1. Adjust the seatback to an upright driving or riding position. 2. Tilt the head restraint forward by gently pulling the top of the head restraint.
Page 161: Power Seats
Seats Moving the seats backward and forward WARNING: Rock the seat backward and forward after releasing the lever to make sure that it is fully engaged. Lumbar adjustment (if equipped) POWER SEATS (IF EQUIPPED) WARNING: Do not adjust the driver seat or seatback while the vehicle is moving.
Page 162 Seats Power Seat Adjustments Power Lumbar 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)
Page 163: Memory Function
Seats MEMORY FUNCTION (IF EQUIPPED) This memory control, located on the driver door, allows automatic positioning of the driver seat and power mirrors to three programmable positions. You may also have this feature for the steering column and power adjustable foot pedals. Programming a memory position 1.
Page 164: Heated Seats
Seats Easy Entry and Exit Feature This feature can move the seat rearward and the optional power steering column up and forward to allow extra room to exit the vehicle. This occurs when: • You place the transmission in neutral (N) or park (P). •...
Page 165 Seats CLIMATE CONTROLLED SEATS (IF EQUIPPED) Heated Seats WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions, must exercise care when using the seat heater. The seat heater may cause burns even at low temperatures, especially if used for long periods of time.
Page 166 Seats Climate Controlled Seat Air Filter Replacement (If Equipped) The climate controlled seat system includes air filters. You must replace them periodically. See the scheduled maintenance information. Locate the filters under each front seat and access them from the second-row foot-well area. Move the front seats all the way forward and to the full up positions to ease access.
Page 167: Rear Seats
Seats REAR SEATS Second Row Seats Recline Adjustment WARNING: Always drive and ride with your seatback upright and the lap belt snug and low across the hips. WARNING: Reclining the seatback can cause an occupant to slide under the seat’s safety belt, resulting in severe personal injuries in the event of a crash.
Page 168 Seats Moving the seats backward and forward (if equipped) Second-Row Heated Seats (If Equipped) WARNING: Persons who are unable to feel pain to the skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion, or other physical conditions, must exercise care when using the seat heater.
Page 169 Seats Third Row Seats Third-Row Seat Access (Manual Seats) WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback. After returning the seatback to its original position, pull on the seatback to make sure that it has fully latched.
Page 170 Seats Type 2 2. Lift the handle located on the side of the seat to fold the seatback flat. 3. Lift the handle all the way up until the seat releases from the floor. Rotate the seat forward to allow access to the third row. 4.
Page 171 Seats 5. Lift the seatback toward the rear of the vehicle, and rotate the seatback until you hear a click, locking it in the upright position. Note: The seatback will not raise if the rear latch hooks are not properly engaged to the floor striker.
Page 172 Seats Third-row seat exit (manual and power fold and tumble seat) WARNING: Before returning the seat back to its original position, make sure that cargo or any objects are not trapped behind the seatback. After returning the seat back to its original position, pull on the seatback to make sure that it has fully latched.
Page 173 Seats 3. To return the seatback to the floor from the tumbled position, rotate the seat down until you hear it latching to the floor. 4. Lift the seatback toward the rear of the vehicle, and rotate the seatback until you hear a click, locking it in the upright position.
Page 174 Seats Folding the Third-Row Manual Seat 1. Remove all objects from the seat and stowage tub. 2. Fold the outboard head restraint by pulling the head restraint release strap. 3. From the rear of the vehicle, fold the seatback by pulling and holding the red strap while pushing the seatback forward.
Page 175 Seats Note: Do not use the third-row seat back as a load floor when the seatback is folded. Note: Make sure that the area under the seat is free of objects before stowing it. Unfolding the third row manual seat Note: Make sure that there are no objects such as books, purses or briefcases on the load floor before unstowing the seat.
Page 176 Seats WARNING: Make sure seat is latched to vehicle floor by pushing and pulling on the seat. If not latched, the seat may cause injury during a sudden stop. WARNING: Before returning the seatback to its original position, make sure that cargo or any objects are not trapped behind the seatback.
Page 177 Seats Note: In order to allow the seat to complete the stowed position, do not place objects under the seat before stowing. Remove all objects from the seat and stowage tub. Note: In the unlikely event that the third-row power seat stops prematurely or travels to an unexpected position, press the FOLD button (C) to reset the seat and return it to a normal position.
Page 178: Universal Garage Door Opener (If Equipped)
Universal Garage Door Opener (If Equipped) 177 HOMELINK® WIRELESS CONTROL SYSTEM (IF EQUIPPED) WARNING: Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage. WARNING: Do not use the system with any garage door opener that does not have the safety stop and reverse feature as required by U.S.
Page 179 178 Universal Garage Door Opener (If Equipped) Programming Note: Put a new battery in the hand-held transmitter. This will ensure quicker training and accurate transmission of the radio-frequency signal. 1. With your vehicle parked outside of the garage and your key in the ignition, turn the key so that the ignition is in the on position.
Page 180 Universal Garage Door Opener (If Equipped) 179 After programming the HomeLink button, follow Steps 5 – 7 as listed below to program your garage door opener. Note: You may need a ladder to reach the unit and you may need to remove the cover or lamp lens on your garage door opener.
Page 181 180 Universal Garage Door Opener (If Equipped) Programming HomeLink to a Genie Intellicode 2 garage door opener Note: The Genie Intellicode 2 transmitter must already be programmed to operate with the garage door opener. Programing the transmitters To program HomeLink to the transmitter you must first put the transmitter into programming mode.
Page 182 Universal Garage Door Opener (If Equipped) 181 Programming HomeLink to the Genie Intellicode garage door opener motor Note: You may need a ladder to access the garage door opener motor. To program HomeLink to the garage door opener motor: 1. Press and hold the PROGRAM button on the garage door opener motor until both blue LED’s turn on.
Page 183: Auxiliary Power Points
Auxiliary Power Points AUXILIARY POWER POINTS WARNING: Do not plug optional electrical accessories into the cigarette lighter socket (if equipped). Improper use of the lighter can cause damage not covered by your warranty, and can result in fire or serious injury. Note: If used when the engine is not running, the battery will discharge.
Page 184 Auxiliary Power Points 110 Volt AC Power Point (If Equipped) WARNING: Do not keep electrical devices plugged in the power point whenever the device is not in use. Do not use any extension cord with the 110 volt AC power point, since it will defeat the safety protection design.
Page 185 Auxiliary Power Points The power point can provide power whenever the ignition is on and the indicator light is on. The indicator light is located in the top left corner of the power point. When the indicator light is: • on — power point is ready to supply power •...
Page 186: Storage Compartments
Storage Compartments CENTER CONSOLE WARNING: Use only soft cups in the cupholder. Hard objects can injure you in a collision. Available console features include: A. USB and audio jack B. Power point (if equipped) C. Large cupholders with handle relief and individual grips D.
Page 187: Overhead Console
Storage Compartments OVERHEAD CONSOLE The appearance of the overhead console will vary according to your option package. Press near the rear edge of the door to open it. 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)
Page 188: Starting And Stopping The Engine
Starting and Stopping the Engine GENERAL INFORMATION WARNING: Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage. WARNING: Do not park, idle, or drive your vehicle on dry grass or other dry ground cover.
Page 189: Ignition Switch
Starting and Stopping the Engine IGNITION SWITCH (IF EQUIPPED) A. Off: The ignition is off. Note: When you switch the ignition off and leave your vehicle, do not leave your key in the ignition. This could cause your vehicle battery to lose charge.
Page 190 Starting and Stopping the Engine Ignition Modes ENGINE START STOP Off: Turns the ignition off. • Without applying the brake pedal, press and release the button once when the ignition is in the on mode, or when the engine is running but the vehicle is not in motion.
Page 191 Starting and Stopping the Engine Before starting the engine check the following: • Make sure all occupants have fastened their safety belts. • Make sure the headlamps and electrical accessories are off. • Make sure the parking brake is on. •...
Page 192 Starting and Stopping the Engine Fast Restart (Vehicles with Keyless Start) The fast restart feature allows you to restart the engine within 20 seconds of switching it off, even if a valid key is not present. Within 20 seconds of switching the engine off, press the brake pedal and press the button.
Page 193: Engine Block Heater
Starting and Stopping the Engine 2. If your vehicle has a keyless start system, move the transmission selector lever to position N and use the brakes to bring your vehicle to a safe stop. When your vehicle has stopped, move the transmission selector lever to position P and switch the ignition off by pressing and holding the button for one second, or pressing it three times within two seconds.
Page 194 Starting and Stopping the Engine We recommend that you do the following for safe and correct operation: • Use a 16-gauge outdoor extension cord that is product certified by Underwriter’s Laboratory or Canadian Standards Association. This extension cord must be suitable for use outdoors, in cold temperatures, and be clearly marked Suitable for Use with Outdoor Appliances.
Page 195: Fuel And Refueling
Fuel and Refueling SAFETY PRECAUTIONS WARNING: Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire. WARNING: The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops.
Page 196: Fuel Quality
Fuel and Refueling • Avoid inhaling fuel vapors. Inhaling too much fuel vapor of any kind can lead to eye and respiratory tract irritation. In severe cases, excessive or prolonged breathing of fuel vapor can cause serious illness and permanent injury. •...
Page 197 Fuel and Refueling Choosing the Right Fuel With a Flex Fuel Vehicle (If Equipped) Use only UNLEADED gasoline or UNLEADED gasoline blended with a maximum of 85% ethanol (E-85) in your Flex Fuel Vehicle (FFV). If your vehicle is flex fuel capable, it will have a yellow bezel placed over the fuel fill inlet Do not use: •...
Page 198: Running Out Of Fuel
Fuel and Refueling RUNNING OUT OF FUEL Avoid running out of fuel because this situation may have an adverse effect on powertrain components. If you have run out of fuel: • You may need to cycle the ignition from off to on several times after refueling to allow the fuel system to pump the fuel from the tank to the engine.
Page 199: Refueling
Fuel and Refueling 2. To open the fuel filler door, press the center of the rear edge and then release. 3. Slowly insert the funnel into the capless fuel system. 4. Fill the vehicle with fuel from the portable fuel container.
Page 200 Fuel and Refueling Use the following guidelines to avoid electrostatic charge build-up when filling an ungrounded fuel container: • Place approved fuel container on the ground. • DO NOT fill a fuel container while it is in the vehicle (including the cargo area).
Page 201 Fuel and Refueling 4. After you are done pumping fuel, slowly remove the fuel filler nozzle—allow about five to ten seconds after pumping fuel before removing the fuel filler nozzle. This allows residual fuel to drain back into the fuel tank and not spill onto the vehicle.
Page 202: Fuel Consumption
Fuel and Refueling FUEL CONSUMPTION Filling the Tank The advertised capacity is the indicated capacity and the empty reserve combined. Indicated capacity is the difference in the amount of fuel in a full tank and a tank when the fuel gauge indicates empty. Empty reserve is the amount of fuel in the tank after the fuel gauge indicates empty.
Page 203 Information are essential to the life and performance of your vehicle and to its emissions system. If other than Ford, Motorcraft® or Ford-authorized parts are used for maintenance replacements or for service of components affecting emission control, such non-Ford parts should be equivalent to genuine Ford Motor Company parts in performance and durability.
Page 204 Fuel and Refueling permitted to intentionally remove an emission control device or prevent it from working. Information about your vehicle’s emission system is on the Vehicle Emission Control Information Decal located on or near the engine. This decal also lists engine displacement. Please consult your warranty information for complete emission warranty information.
Page 205 Fuel and Refueling Readiness for Inspection/Maintenance (I/M) Testing Some state, provincial and local governments may have Inspection/Maintenance (I/M) programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent you from getting a vehicle registration. If the service engine soon indicator is on or the bulb does not work, the vehicle may need to be serviced.
Page 206: Transmission
Transmission AUTOMATIC TRANSMISSION WARNING: Always set the parking brake fully and make sure the gearshift is latched in P (Park). Turn the ignition to the off position and remove the key whenever you leave your vehicle. WARNING: Do not use the tow feature when driving in icy or slippery conditions as the increased engine braking can cause the rear wheels to slide and the vehicle to swing around with the possible loss of vehicle control.
Page 207 Transmission D (Drive) with Overdrive The normal driving position for the best fuel economy. Transmission operates in gears one through six. The automatic transmission shift strategy has the ability to detect hilly terrain or mountainous areas and will provide a limited amount of grade assist features automatically.
Page 208 Transmission Grade assist: • Provides additional grade (engine) braking and extends lower gear operation on uphill climbs for hilly terrain or mountainous areas. • Provides additional engine braking through the automatic transmission shift strategy which reacts to vehicle inputs (vehicle acceleration, accelerator pedal, brake pedal and vehicle speed).
Page 209 Transmission SelectShift Automatic® Transmission Your SelectShift automatic transmission gives you the ability to manually change gears if you’d like. To use SelectShift, move the gearshift lever into M (Manual). Now you can use select shift to manually change gears. If your vehicle is equipped with (+)/(–) buttons on the side of your gearshift lever: •...
Page 210 Transmission Upshift to the recommended shift speeds according to the following chart. Upshifts when accelerating (recommended for best fuel economy) Shift from: 1 - 2 15 mph (24 km/h) 2 - 3 25 mph (40 km/h) 3 - 4 40 mph (64 km/h) 4 - 5 45 mph (72 km/h) 5 - 6...
Page 211 Transmission Apply the parking brake, turn the ignition key to the off position, and remove the key. 1. Using a screwdriver (or similar tool), carefully pry off and remove the Brake shift interlock access panel. 2. Locate the brake shift interlock lever in front of the shifter assembly.
Page 212 Transmission If Your Vehicle Gets Stuck in Mud or Snow Note: Do not rock the vehicle if the engine is not at normal operating temperature or damage to the transmission may occur. Note: Do not rock the vehicle for more than a minute or damage to the transmission and tires may occur, or the engine may overheat.
Page 213: Four-Wheel Drive (If Equipped)
Four-Wheel Drive (If Equipped) USING YOUR FOUR WHEEL DRIVE (4WD) SYSTEM The intelligent 4WD system continuously monitors vehicle conditions and automatically adjusts the power distribution between the front and rear wheels. It combines transparent all-surface operation with highly capable four-wheel drive. The 4WD system is always active and requires no driver input.
Page 214 Four-Wheel Drive (If Equipped) How Utility Vehicles Differ from Other Vehicles Truck and utility vehicles can differ from some other vehicles. Your vehicle may be higher to allow it to travel over rough terrain without getting hung up or damaging underbody components. The differences that make your vehicle so versatile also make it handle differently than an ordinary passenger car.
Page 215 Four-Wheel Drive (If Equipped) If your vehicle goes off the edge of the pavement WARNING: Vehicles with a higher center of gravity such as utility and four-wheel drive vehicles handle differently than vehicles with a lower center of gravity. Utility and four-wheel drive vehicles are not designed for cornering at speeds as high as passenger cars any more than low-slung sports cars are designed to perform satisfactorily under off-road conditions.
Page 216 Four-Wheel Drive (If Equipped) If your vehicle gets stuck in mud or snow it may be rocked out by shifting between forward and reverse gears, stopping between shifts, in a steady pattern. Press lightly on the accelerator in each gear. Note: Do not rock the vehicle if the engine is not at normal operating temperature or damage to the transmission may occur.
Page 217 Ford Motor Company joins the U.S. Forest Service and the Bureau of Land Management in encouraging you to help preserve our national forest and other public and private lands by “treading lightly.”...
Page 218 Four-Wheel Drive (If Equipped) Although natural obstacles may make it necessary to travel diagonally up or down a hill or steep incline, you should always try to drive straight up or straight down. Whenever driving on a hill, determine beforehand the route you will use.
Page 219 Ford Motor Company recommends that caution be used with any vehicle equipped with a high load or device (such as ladder racks or pickup box cover).
Page 220: Brakes
Brakes GENERAL INFORMATION Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn out. Have them inspected by an authorized dealer. If your vehicle has continuous vibration or shudder in the steering wheel while braking, have your vehicle inspected by an authorized dealer.
Page 221: Hints On Driving With Anti-Lock Brakes
Brakes Anti-Lock Brake System This system helps you maintain steering control during emergency stops by keeping the brakes from locking. This lamp momentarily illuminates when you turn the ignition on. If the light does not illuminate during start-up, remains on or flashes, the anti-lock brake system may be disabled.
Page 222: Hill Start Assist
Brakes HILL START ASSIST WARNING: The hill start assist feature does not replace the parking brake. When you leave the vehicle, always apply the parking brake and shift the transmission into park (P). WARNING: You must remain in the vehicle once you have activated the hill start assist feature.
Page 223: Traction Control
Traction Control PRINCIPLES OF OPERATION The traction control system helps avoid drive wheel spin and loss of traction. If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, the system reduces engine power in order to increase traction.
Page 224: Stability Control
Stability Control PRINCIPLES OF OPERATION WARNING: Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and wheel or tire size may change the handling characteristics of the vehicle and may adversely affect the performance of the AdvanceTrac® system. In addition, installing any stereo loudspeakers may interfere with and adversely affect the AdvanceTrac®...
Page 225 Stability Control A Vehicle without AdvanceTrac® with RSC® skidding off its intended route. B Vehicle with AdvanceTrac® with RSC® maintaining control on a slippery surface. USING ADVANCETRAC® WITH RSC® The system automatically activates when you start your engine. The AdvanceTrac® with RSC® system cannot be completely turned off, but the electronic stability control and roll stability control portions of the system are disabled when the transmission is in reverse (R).
Page 226: Terrain Response
Terrain Response TERRAIN MANAGEMENT (IF EQUIPPED) This system optimizes drivability and comfort as well as maximizing traction while operating on different types of terrain. Turn the control located on the center console to choose between the following modes: 1. Grass/Gravel/Snow mode should be selected where a firm surface is covered with loose or slippery material such as packed snow, ice, water, grass, or a thin layer of gravel or sand.
Page 227: Hill Descent Control
Terrain Response If the system becomes inoperable, selecting some modes may not be possible and a message is displayed. If it becomes inoperable due to a system malfunction, all of the mode indicators on the control turn off and one of the following messages appears in the information display: TERRAIN MANAGEMENT SYSTEM FAULT: Cycling the key may clear the fault.
Page 228 Terrain Response To enable hill descent control and set the descent speed, do the following: 1. Press and release the hill descent button located in the center of the terrain management control. A light in the control will illuminate and chime will sound when this feature is activated.
Page 229: Parking Aids
Parking Aids SENSING SYSTEM (IF EQUIPPED) WARNING: To help avoid personal injury, please read and understand the limitations of the system as contained in this section. Sensing is only an aid for some (generally large and fixed) objects when moving in reverse on a flat surface at parking speeds. Traffic control systems, inclement weather, air brakes, and external motors and fans may also affect the function of the sensing system;...
Page 230 Parking Aids If a fault is present in the system, a warning message appears in the information display and does not allow the driver to switch the faulted system on. Note: If your vehicle is equipped with MyKey®, it is possible to prevent turning the sensing system off.
Page 231: Active Park Assist
Parking Aids ACTIVE PARK ASSIST (IF EQUIPPED) WARNING: This system is designed to be a supplementary park aid. It may not work in all conditions and is not intended to replace the driver’s attention and judgment. The driver is responsible for avoiding hazards and maintaining a safe distance and speed, even when the system is in use.
Page 232 Parking Aids Using Active Park Assist Press the button; the touch screen displays a message and a AUTO corresponding graphic to indicate it’s searching for a parking space. Use the turn signal to indicate which side of the vehicle you want the system to search on.
Page 233 Parking Aids Automatic Steering into Parking Space Note: If vehicle speed exceeds 6 mph (10 km/h), the system turns off and you need to take full control of the vehicle. Note: If a maneuver is interrupted before completion, the system turns off and you need to full take control of the vehicle.
Page 234 Parking Aids Deactivating the Park Assist Feature The system can be deactivated manually by: • pressing the active park assist button • grabbing the steering wheel • driving above approximately 20 mph (35 km/h) for 30 seconds during an active park search •...
Page 235: Rear-View Camera System
Parking Aids The system does not position the vehicle where I want in the space The vehicle is rolling in the opposite direction of the transmission (i.e. rolling forward when R [Reverse] is selected) The transmission is in R (Reverse); the vehicle must be moving forward to detect a parking space An irregular curb along the parking space prevents the system from aligning the vehicle properly...
Page 236 Parking Aids WARNING: Use caution when using the rear video camera and the liftgate is ajar. If the liftgate is ajar, the camera will be out of position and the video image may be incorrect. All guidelines have been removed when the liftgate is ajar. WARNING: Use caution when turning camera features on or off while in R (Reverse).
Page 237 Parking Aids Note: If the transmission is in R (Reverse) and the trunk/liftgate is ajar, no rear view camera features are displayed. Note: If the image comes on while the transmission is not in R (Reverse), have the system inspected by your authorized dealer. Note: When towing, the camera only sees what is being towed behind the vehicle.
Page 238 Parking Aids Guidelines and the Centerline Note: Fixed guidelines and active guidelines (if equipped) are only available when the transmission is in R (Reverse). A. Active guidelines (if equipped) B. Centerline C. Fixed guideline: Green zone D. Fixed guideline: Yellow zone E.
Page 239 Parking Aids Enhanced Park Aids Note: Enhanced park aids is only available when the transmission is in R (Reverse). Note: The reverse sensing system is not effective at speeds above 3 mph (5 km/h) and may not detect certain angular or moving objects. The enhanced park aids allows the driver to view the area that is being detected by the reverse sensing system.
Page 240: Cruise Control
Cruise Control PRINCIPLES OF OPERATION Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. USING CRUISE CONTROL WARNING: Do not use cruise control in heavy traffic, on winding roads or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death.
Page 241: Using Adaptive Cruise Control
Cruise Control Changing the Set Speed Note: If you accelerate by pressing the accelerator pedal, the set speed will not change. When you release the accelerator pedal, you will return to the speed that you previously set. • Press SET up or down and hold to increase or decrease the set speed. Release the control when you reach the desired speed.
Page 242 Cruise Control WARNING: Do not use in poor visibility, specifically fog, rain, spray or snow. Note: It is your responsibility to stay alert, drive safely and be in control of your vehicle at all times. The system adjusts your speed to maintain a proper distance between you and the vehicle in front of you in the same lane.
Page 243 Cruise Control 4. Take your foot off the accelerator pedal. 5. A lead vehicle graphic will illuminate if there is a vehicle detected in front of you. Note: When adaptive cruise control is active, the speedometer may vary slightly from the set speed displayed in the information display. Following a Vehicle WARNING: When following a vehicle in front of you, your vehicle will not decelerate automatically to a stop, nor will your...
Page 244 Cruise Control To help you to pass, the system may provide a small, temporary acceleration when you switch on the left turn signal while following a lead vehicle. If the system predicts that its maximum braking level will not be sufficient, an audible warning will sound while the system continues to brake.
Page 245 Cruise Control When you are overriding the system, the green indicator light illuminates and the follow vehicle does not show in the information display. The system will resume operation when you release the accelerator pedal. The vehicle speed will decrease to the set speed, or a lower speed if following a slower vehicle.
Page 246 Cruise Control engine braking in these situations to reduce the load on the vehicle’s regular brake system to prevent them from overheating. Switching Off Adaptive Cruise Control Note: The set speed memory will erase when you switch the system off. Press and release OFF or turn off the ignition.
Page 247 Cruise Control Adaptive Cruise Control Not Available Several conditions exist which can cause the system to deactivate or prevent the system from activating when requested. These conditions include: • a blocked sensor • high brake temperature • a failure in the system or a related system. Blocked Sensor WARNING: Do not use ACC when towing a trailer with brake controls.
Page 248 Cruise Control Cause Action The surface of the radar in the Clean the grille surface in front of grille is dirty or obstructed in the radar or remove the object some way. causing the obstruction. The surface of the radar in the Wait a short time.
Page 249: Driving Aids
Driving Aids DRIVER ALERT (IF EQUIPPED) WARNING: The driver alert system is designed to aid you. It is not intended to replace your attention and judgment. You are still responsible to drive with due care and attention. Note: The system will store the on/off setting in the information display menu through ignition cycles.
Page 250 Driving Aids System Display When active the system will run automatically in the background and only issue a warning if required. You can view the status at any time using the information display. Refer to the Information Displays chapter. The alertness level is shown by six steps in a colored bar. The current assessment of your alertness is within a typical range.
Page 251: Lane Keeping System
Driving Aids LANE KEEPING SYSTEM (IF EQUIPPED) WARNING: The system is designed to aid the driver. It is not intended to replace the driver’s attention and judgment. The driver is still responsible to drive with due care and attention. The system notifies you to stay in your lane through the steering system and the instrument cluster display when the front camera detects an unintentional drift out of your lane is likely to occur.
Page 252 Driving Aids Mode: This setting allows you to enable one of the system features. Alert only – Provides a steering wheel vibration when the system detects an unintended lane departure. Aid only – Provides an assistance steering torque input toward the lane center when the system detects an unintended lane departure.
Page 253 Driving Aids System Display When you switch the system on, an overhead graphic of a vehicle with lane markings will be displayed in the left instrument cluster display. If the aid mode is selected after you switch the system on, arrows will be displayed with the lane markings.
Page 254 Driving Aids Troubleshooting Why is the feature not available (line markings are gray) when I can see the lane markings on the road? Vehicle speed is outside the operational range of the feature Sun is shining directly into the camera lens Quick intentional lane change Staying too close to the lane marking Driving at high speeds in curves...
Page 255 Driving Aids BLIND SPOT INFORMATION SYSTEM (BLIS®) WITH CROSS TRAFFIC ALERT (CTA) (IF EQUIPPED) WARNING: To help avoid injuries, NEVER use the BLIS® as a replacement for using the interior and exterior mirrors and looking over your shoulder before changing lanes. BLIS® is not a replacement for careful driving.
Page 256 Driving Aids Using the Systems BLIS® turns on when the engine is started and the vehicle is driven forward above 3 mph (5 km/h); it remains on while the transmission is in D (Drive) or N (Neutral). If shifted out of D (Drive) or N (Neutral), the system enters CTA mode.
Page 257 Driving Aids Zone coverage also decreases when parking at shallow angles. Here, the left sensor is mostly obstructed; zone coverage on that side is severely limited. System Lights and Messages The BLIS® and CTA systems illuminate a yellow alert indicator in the outside mirror on the side of the vehicle the approaching vehicle is coming from.
Page 258 Driving Aids System Sensors WARNING: Just prior to the system recognizing a blocked condition and alerting the driver, the number of missed objects will increase. To help avoid injuries, NEVER use the BLIS® as a replacement for using the side and rear view mirrors and looking over your shoulder before changing lanes.
Page 259 Driving Aids Reasons for messages being displayed Heavy rainfall/snowfall No action required. The system automatically interferes with the resets to an unblocked state once the radar signals rainfall/snowfall rate decreases or stops. Do not use BLIS® and/or CTA in these conditions. System Limitations The BLIS®...
Page 260: Collision Warning System
Driving Aids Switching the Systems Off and On One or both systems can be switched off temporarily by using the information display control; refer to the Information Display chapter. When you switch off the Blind Spot Information System, you will not receive alerts and the information display will display a system off message.
Page 261 Driving Aids If it is, a red warning light illuminates and an audible warning chime sounds. The brake support system assists the driver in reducing the collision speed by charging the brakes. If the risk of collision further increases after the warning light illuminates, the brake support prepares the brake system for rapid braking.
Page 262 Driving Aids Blocked Sensors If a message regarding a blocked sensor appears in the information display, the radar signals from the sensor have been obstructed. The sensors are located behind a fascia cover near the driver side of the lower grille. When the sensors are obstructed, a vehicle ahead cannot be detected and the collision warning system does not function.
Page 263: Steering
Driving Aids • Pedestrians or objects in the roadway. • Oncoming vehicles in the same lane. • Severe weather conditions (see blocked sensor section). • Debris build-up on the grille near the headlamps (see blocked sensor section). • Small distance to vehicle ahead. •...
Page 264 Driving Aids WARNING: Obtain immediate service if a system error is detected. You may not notice any difference in the feel of your steering, but a serious condition may exist. Failure to do so may result in loss of steering control. Your vehicle is equipped with an electric power-assisted steering system.
Page 265: Load Carrying
Load Carrying CARGO NETS (IF EQUIPPED) WARNING: This net is not designed to restrain objects during a collision or heavy braking. The cargo net secures lightweight objects in the cargo area. Attach the net to the loops and anchors provided. ROOF RACKS AND LOAD CARRIERS (IF EQUIPPED) WARNING: When loading the roof racks, we recommend you evenly distribute the load, as well as maintain a low center of...
Page 266: Vehicle Loading
Load Carrying For correct roof rack system function, you must place loads directly on crossbars affixed to the roof rack side rails. We recommend you use Ford Genuine Accessory crossbars designed specifically for your vehicle. Make sure that you securely fasten the load. Check the tightness of the load before driving and at each fuel stop.
Page 267 Load Carrying Vehicle Curb Weight – is the weight of your new vehicle when you picked it up from your authorized dealer plus any aftermarket equipment. Payload – is the combined weight of cargo and passengers that the vehicle is carrying. The maximum payload for your vehicle can be found on the Tire Label on the B-Pillar or the edge of the driver’s door (vehicles exported outside the US and Canada may not have a Tire Label).
Page 268 Load Carrying Example only: Cargo Weight – includes all weight added to the Base Curb Weight, including cargo and optional equipment. When towing, trailer tongue load or king pin weight is also part of cargo weight. 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)
Page 269 Load Carrying GAW (Gross Axle Weight) – is the total weight placed on each axle (front and rear) – including vehicle curb weight and all payload. GAWR (Gross Axle Weight Rating) – is the maximum allowable weight that can be carried by a single axle (front or rear). These numbers are shown on the Safety Compliance Certification Label.
Page 270 Load Carrying • Example only: WARNING: Exceeding the Safety Compliance Certification Label vehicle weight rating limits could result in substandard vehicle handling or performance, engine, transmission and/or structural damage, serious damage to the vehicle, loss of control and personal injury. 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)
Page 271 Load Carrying GCW (Gross Combined Weight) – is the weight of the loaded vehicle (GVW) plus the weight of the fully loaded trailer. GCWR (Gross Combined Weight Rating) – is the maximum allowable weight of the vehicle and the loaded trailer – including all cargo and passengers –...
Page 272 Load Carrying WARNING: Do not use replacement tires with lower load carrying capacities than the original tires because they may lower the vehicle’s GVWR and GAWR limitations. Replacement tires with a higher limit than the original tires do not increase the GVWR and GAWR limitations.
Page 273 Load Carrying • Suppose your vehicle has a 1400 lb. (635 kg) cargo and luggage capacity. You and one of your friends decide to pick up cement from the local home improvement store to finish that patio you have been planning for the past 2 years.
Page 274: Towing
Towing TOWING A TRAILER WARNING: Do not exceed the GVWR or the GAWR specified on the certification label. WARNING: Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of your vehicle and could result in engine damage, transmission damage, structural damage, loss of vehicle control, vehicle rollover and personal injury.
Page 275 TRAILER SWAY CONTROL (IF EQUIPPED) WARNING: Turning off trailer sway control increases the risk of loss of vehicle control, serious injury or death. Ford does not recommend disabling this feature except in situations where speed reduction may be detrimental (such as hill climbing), the driver has significant trailer towing experience, and can control trailer sway and maintain safe operation.
Page 276 Towing Your vehicle may tow a trailer provided the maximum trailer weight is less than or equal to the maximum trailer weight listed for your vehicle configuration on the following chart. Engine Maximum GCWR Maximum trailer weight Front-wheel drive vehicles 2.0L GTDI 6880 lb (3120 kg) 2000 lb (907 kg)
Page 277 Towing Trailer Towing Connector (Vehicles with a Trailer Towing Package and 7–Pin Connector) When attaching the trailer wiring connector to your vehicle, only use a proper fitting connector that works with the vehicle and trailer functions. If your vehicle has a trailer towing package, it may have a 7–pin connector.
Page 278 Towing 2. To reinstall the cover, insert the four plastic tabs on top of the cover into the corresponding slots (B), and push the cover into the bumper trim. 3. Hold the cover against the bumper trim and reinstall the two ⁄...
Page 279 Towing Safety Chains Note: Never attach safety chains to the bumper. Always connect the safety chains to the hook retainers of your vehicle hitch. To connect the safety chains, cross them under the trailer tongue and allow enough slack for turning tight corners. Do not allow the chains to drag on the ground.
Page 280 Towing When Towing a Trailer • Do not drive faster than 70 mph (113 km/h) during the first 500 miles (800 kilometers). • Do not make full-throttle starts. • Check your hitch, electrical connections and trailer wheel lug nuts thoroughly after you have traveled 50 miles (80 kilometers). •...
Page 281 We recommend the use of a wheel lift and dollies or flatbed equipment to tow your vehicle. Do not tow with a slingbelt. Ford Motor Company has not approved a slingbelt towing procedure. Vehicle damage may occur if towed incorrectly, or by any other means.
Page 282: Recreational Towing
Towing It is acceptable to have your front-wheel drive vehicle towed from the front if using proper wheel lift equipment to raise the front wheels off the ground. When towing in this manner, the rear wheels can remain on the ground. Front-wheel drive vehicles must have the front wheels placed on a tow dolly when towing your vehicle from the rear using wheel lift equipment.
Page 283 Towing Vehicles Equipped with a 3.5L or 3.7L Engine Note: Put your climate control system in recirculated air mode to prevent exhaust fumes from entering your vehicle. See the Climate Control chapter. Follow these guidelines if you have a need for recreational towing, such as towing your vehicle behind a motorhome or truck.
Page 284: Driving Hints
Driving Hints BREAKING-IN You need to break in new tires for approximately 300 miles (480 kilometers). During this time, your vehicle may exhibit some unique driving characteristics. Avoid driving too fast during the first 1000 miles (1600 kilometers). Vary your speed frequently and change up through the gears early.
Page 285: Floor Mats
Driving Hints • Add particular accessories to your vehicle (e.g.; bug deflectors, rollbars or light bars, running boards, ski racks). • Drive with the wheels out of alignment. DRIVING THROUGH WATER WARNING: Do not drive through flowing or deep water as you may lose control of your vehicle.
Page 286 Driving Hints WARNING: Always make sure that the floor mats are properly attached to the retention posts in the carpet that are supplied with your vehicle. Floor mats must be properly secured to both retention posts to make sure mats do not shift out of position. WARNING: Never place floor mats or any other covering in the vehicle foot well that cannot be properly secured to prevent them from moving and interfering with the pedals or the ability to control the...
Page 287: Roadside Emergencies
• Winch out – available within 100 feet (30.5 meters) of a paved or county maintained road, no recoveries. • Towing – Ford eligible vehicles will be towed to an authorized dealer within 35 miles (56.3 kilometers) of the disablement location or to the nearest authorized dealer.
Page 288 1-800-241-3673. If you need to arrange roadside assistance for yourself, Ford Motor Company will reimburse a reasonable amount for towing to the nearest Ford dealership within 35 miles (56.3 kilometers). To obtain reimbursement information, United States Ford vehicle customers call 1-800-241-3673. Customers will be asked to submit their original receipts.
Page 289: Hazard Warning Flashers
WARNING: Failure to inspect and if necessary repair fuel leaks after a collision may increase the risk of fire and serious injury. Ford Motor Company recommends that the fuel system be inspected by an authorized dealer after any collision. In the event of a moderate to severe collision, this vehicle includes a fuel pump shutoff feature that stops the flow of fuel to the engine.
Page 290: Jump-Starting The Vehicle
Roadside Emergencies Note: When you try to restart your vehicle after a fuel shutoff, the vehicle makes sure that various systems are safe to restart. Once your vehicle determines that the systems are safe, then the vehicle will allow you to restart. Note: In the event that your vehicle does not restart after your third attempt, contact an authorized dealer.
Page 291 Roadside Emergencies Connecting the Jumper Cables WARNING: Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery. Note: Do not attach the negative (-) cable to fuel lines, engine rocker covers, the intake manifold or electrical components as grounding points.
Page 292 Roadside Emergencies Jump Starting 1. Start the engine of the booster vehicle and run the engine at a moderately increased speed. 2. Start the engine of the disabled vehicle. 3. Once the disabled vehicle has been started, run both engines for an additional three minutes before disconnecting the jumper cables.
Page 293: Customer Assistance
A reasonable time must be allowed to perform a repair after taking your vehicle to the authorized dealer. Repairs will be made using Ford or Motorcraft parts, or remanufactured or other parts that are authorized by Ford.
Page 294 • The name of the authorized dealer and city where located • The vehicle’s current odometer reading. In some states, you must directly notify Ford in writing before pursuing remedies under your state’s warranty laws. Ford is also allowed a final repair attempt in some states.
Page 295 In the case of 1 or 2 above, the consumer must also notify the manufacturer of the need for the repair of the nonconformity at the following address: Ford Motor Company 16800 Executive Plaza Drive Mail Drop 3NE-B Dearborn, MI 48126...
Page 296 BBB Auto Line dispute, and decision, are admissible in the court action. Should you choose to accept the BBB AUTO LINE decision, Ford is then bound by the decision, and must comply with the decision within 30 days of receipt of your acceptance letter.
Page 297 (CANADA ONLY) This pertains to vehicles delivered to authorized Canadian dealers. In those cases, where you continue to feel that the efforts by Ford of Canada and the authorized dealer to resolve a factory-related vehicle service concern have been unsatisfactory, Ford of Canada participates in an impartial third party mediation or arbitration program administered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
Page 298 FORD MOTOR COMPANY Customer Relationship Center 1555 Fairlane Drive Fairlane Business Park #3 Allen Park, Michigan 48101 Telephone: (800) 841-FORD (3673) FAX: (313) 390-0804 Email: prcac@ford.com www.ford.com.pr 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014...
Page 299 If you buy your vehicle in North America and then relocate to any of the above locations, register your vehicle identification number (VIN) and new address with Ford Motor Company Export Operations & Global Growth Initiatives by emailing expcac@ford.com. If you are in another foreign country, contact the nearest authorized dealer.
Page 300: Reporting Safety Defects (U.s. Only)
However, NHTSA cannot become involved in individual problems between you, your dealer, or Ford Motor Company. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1–888–327–4236 (TTY: 1–800–424–9153);...
Page 301: Fuses
Fuses CHANGING A FUSE Fuses WARNING: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire. If electrical components in your vehicle are not working, a fuse may have blown.
Page 302 Fuses 94 93 92 91 90 89 The high-current fuses are coded as follows: Fuse or relay Fuse amp Protected components number rating — Not used — Not used 30A** Trailer brake control module 30A** Wipers, Front washer 50A** Anti-lock brake system pump —...
Page 303 Fuses Fuse or relay Fuse amp Protected components number rating 40A** 110-volt AC power point 40A** Front blower motor 30A** Starter motor 20A** Power point #1, cigar lighter 20A** Power point #3 (cargo area) 30A** Third row seat module 30A** Driver power seat, Memory module 30A**...
Page 304 Fuses Fuse or relay Fuse amp Protected components number rating 40A** Auxiliary blower motor — Not used 30A** Second row heated seats 30A** Passenger seat 40A** Anti-lock brake system valves — Rear washer relay Rain sensor — Not used — Not used —...
Page 305 Fuses Fuse or relay Fuse amp Protected components number rating 20A* Vehicle power #2 (emission related powertrain components) 20A* Vehicle power #4 (ignition coils) 20A* Vehicle power #1 (powertrain control module) 10A* Vehicle power #3 (coil), All-wheel drive module, Air conditioning variable compressor control —...
Page 306 Fuses Fuse or relay Fuse amp Protected components number rating Front blower relay coil, Electronic power assist steering module 10A* Powertrain control module, Transmission control module, Engine control module (2.0L engine) 10A* Adaptive cruise control 10A* Anti-lock brake system module, Plant EVAC and fill Rear blower motor, Rear defroster, Trailer tow battery...
Page 307: Table Of Contents
Fuses Passenger Compartment Fuse Panel The fuse panel is located below and to the left of the steering wheel by the brake pedal. Remove the panel cover to access the fuses. To remove a fuse use the fuse puller tool provided on the fuse panel cover.
Page 308 Fuses Fuse or relay Fuse amp Protected components number rating Amplifier Not used (spare) 7.5A Memory seat module logic feed Not used (spare) 4-inch radio display, Power liftgate logic, Electronic finish panel, SYNC Run/accessory relay (wipers, rear washer), Rain sensor Instrument cluster, Heads-up display Interior courtesy lamps (overhead...
Page 309 Fuses Fuse or relay Fuse amp Protected components number rating Horn relay Steering wheel control module, Intelligent access, Headlamp switch Datalink connector, Steering wheel control module Liftgate release Radio frequency module Intelligent access module Ignition switch, Push-button start switch Radio, Global positioning system module Front park lamps Trailer tow brake controller...
Page 310 Fuses Fuse or relay Fuse amp Protected components number rating Auto-dimming rearview mirror, Moonroof High beam headlamp shutters Rear park lamps, License plate lamps, Trailer tow park lamps 7.5A Overdrive cancel, Tow/haul Not used (spare) Not used (spare) Not used (spare) Not used (spare) Climate control module Fog lamps, left and right turn...
Page 311: General Information
GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of Ford authorized dealers who are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly.
Page 312: Opening And Closing The Hood
Maintenance OPENING AND CLOSING THE HOOD 1. Inside the vehicle, pull the hood release handle located under the bottom left corner of the instrument panel. 2. Go to the front of the vehicle and release the auxiliary latch that is located under the front center of the hood.
Page 313: Under Hood Overview
Maintenance UNDER HOOD OVERVIEW 2.0L EcoBoost® Engine A. Engine coolant reservoir B. Brake fluid reservoir C. Battery D. Power distribution box E. Air filter assembly F. Engine oil filler cap G. Engine oil dipstick H. Windshield washer fluid reservoir 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)
Page 314 Maintenance 3.5L V6 Engine A. Engine coolant reservoir B. Brake fluid reservoir C. Battery D. Power distribution box E. Air filter assembly F. Transmission fluid dipstick (out of view) G. Engine oil dipstick H. Engine oil filler cap I. Windshield washer fluid reservoir 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)
Page 315 Maintenance 3.5L V6 EcoBoost® Engine A. Engine coolant reservoir B. Brake fluid reservoir C. Battery D. Power distribution box E. Air filter assembly F. Automatic transmission fluid dipstick (out of view) G. Engine oil dipstick H. Engine oil filler cap I.
Page 316: Engine Oil Dipstick
Maintenance Engine shield Some vehicles may be equipped with an aero-shield under the engine. This shield needs to be removed for service, including oil and filter changes. It is secured with four quick release fasteners. ENGINE OIL DIPSTICK 2.0L EcoBoost A.
Page 317: Engine Oil Check
Specification Advisory Council (ILSAC), comprised of U.S. and Japanese automobile manufacturers. 1. Remove the filler cap. 2. Add engine oil that meets Ford specifications. See Capacities and Specifications for more information. 3. Wipe off any spilled oil. 4. Replace the filler cap. Turn it until you feel a strong resistance.
Page 318 Note: For best results, coolant concentration should be tested with a refractometer such as Robinair Coolant and Battery Refractometer 75240. Ford does not recommend the use of hydrometers or coolant test strips for measuring coolant concentration. Note: Automotive fluids are not interchangeable. Do not use engine coolant/antifreeze or windshield washer fluid outside of its specified function and vehicle location.
Page 319 Severe Climates If you drive in extremely cold climates: • It may be necessary to have a Ford authorized dealer increase the coolant concentration above 50%. 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014...
Page 320 If you drive in extremely hot climates: • It may be necessary to have a Ford authorized dealer decrease the coolant concentration to 40%. • A coolant concentration of 40% will provide improved overheat protection.
Page 321 Maintenance If you notice any of the following: • the engine coolant temperature gauge moves fully into the red (hot) area • the coolant temperature warning light illuminates • the service engine soon indicator illuminates 1. Pull off the road as soon as safely possible and place the vehicle in P (Park).
Page 322 Maintenance When this occurs the vehicle will still operate. However: • The engine power will be limited. • The air conditioning system will be disabled. Continued operation will increase the engine temperature and the engine will completely shut down, causing steering and braking effort to increase.
Page 323 Maintenance TRANSMISSION FLUID CHECK 6F35 TRANSMISSION (if equipped) Note: Transmission fluid should be checked by an authorized dealer. If required, fluid should be added by an authorized dealer. The automatic transmission does not have a transmission fluid dipstick. Refer to your scheduled maintenance information for scheduled intervals for fluid checks and changes.
Page 324 Maintenance 3. With the parking brake engaged and your foot on the brake pedal, start the engine and move the gearshift lever through all of the gear ranges. Allow a minimum of 10 seconds for each gear to engage. 4. Latch the gearshift lever in P (Park) and leave the engine running. 5.
Page 325 Maintenance 3. Remove the bolt cover (if equipped). 4. Remove two bolts that attach the air filter assembly to the front of the vehicle (2). 5. Loosen the clamp holding the air filter assembly to the rubber hose (1). 6. Remove the harness retaining clip by pulling up (3). Do not disconnect the sensor (4).
Page 326 Maintenance Low fluid level If the fluid level is below the MIN range of the dipstick, add fluid to reach the hash mark level. Note: If the fluid level is below the MIN level, do not drive the vehicle. An underfill condition may cause shift and/or engagement concerns and/or possible damage.
Page 327: Brake Fluid Check
Maintenance If an overfill occurs, excess fluid should be removed by an authorized dealer. Note: An overfill condition of transmission fluid may cause shift and/or engagement concerns and/or possible damage. Do not use supplemental transmission fluid additives, treatments or cleaning agents. The use of these materials may affect transmission operation and result in damage to internal transmission components.
Page 328: Fuel Filter
Add fluid to fill the reservoir if the level is low. Only use a washer fluid that meets Ford specifications. See the technical specifications chart in the Capacities and Specifications chapter. Note: The front and rear washer systems are supplied from the same reservoir.
Page 329 Maintenance WARNING: Keep batteries out of reach of children. Batteries contain sulfuric acid. Avoid contact with skin, eyes or clothing. Shield your eyes when working near the battery to protect against possible splashing of acid solution. In case of acid contact with skin or eyes, flush immediately with water for a minimum of 15 minutes and get prompt medical attention.
Page 330 Maintenance • The vehicle may need to be driven to relearn the idle and fuel trim strategy. • Note: If you do not allow the engine to relearn its idle trim, the idle quality of your vehicle may be adversely affected until the idle trim is eventually relearned.
Page 331: Checking The Wiper Blades
Maintenance When a battery replacement is required, the battery should be replaced with a Ford recommended replacement battery that matches the electrical requirements of the vehicle. After battery replacement, or in some cases after charging the battery with an external charger, the BMS requires eight hours of vehicle sleep time (key off with doors closed) to relearn the new battery state of charge.
Page 332 Maintenance Changing the rear window wiper blade To replace the rear wiper blade: 1. Press the wiper blade against the glass with one hand and hold it. 2. Pull the wiper arm away from the wiper blade to separate. 3. To attach the new wiper to the wiper arm, align the slot (1) and cross pin (2) and firmly press the wiper arm into the wiper blade until...
Page 333: Changing The Air Filter Element
Maintenance Changing the Air Filter Element 3.5L V6 engine 2.0L EcoBoost® and 3.5L V6 EcoBoost® engines 1. On the passenger’s side of the air filter housing, release the two clamps from the air filter housing cover. 2. Lift the passenger’s side of the cover and push the cover toward the passenger’s side.
Page 334: Adjusting The Headlamps
Maintenance 7. Lower the driver’s side of the cover and slide the three tabs on the cover into the three slots in the housing. 8. Lower the passenger’s side of the cover. Engage the two clamps to secure the cover to the housing. ADJUSTING THE HEADLAMPS The headlamps on your vehicle are properly aimed at the assembly plant.
Page 335 Maintenance For vehicles with halogen headlamps: On the wall or screen you will observe a flat zone of high intensity light located at the top of the right hand portion of the beam pattern. If the top edge of the high intensity light zone is not at the horizontal reference line, the headlamp will need to be adjusted.
Page 336: Changing A Bulb
Maintenance CHANGING A BULB Lamp Assembly Condensation Exterior lamps are vented to accommodate normal changes in pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold.
Page 337 Maintenance 3. Remove the bulb cover. 4. Turn the bulb base counterclockwise and remove 5. Disconnect the electrical connector. Reverse steps to reinstall bulb(s). Replacing HID headlamp bulbs (if equipped) The headlamps on your vehicle use a “high intensity discharge” source. These lamps operate at a high voltage.
Page 338 Maintenance Front parking lamp/turn signal and sidemarker bulbs 1. Make sure that the headlamp control is in the off position. 2. Open the hood. 3. Remove the hood overslam bumper tower to service park/turn or sidemarker bulbs (if needed). Replacing front parking lamp/turn signal bulbs 1.
Page 339 Maintenance Replacing front fog lamp bulbs 1. Make sure the headlamp switch is off. 1. Make sure that the fog lamp switch is in the off position. 2. Remove the bulb socket from the fog lamp by turning it counterclockwise. 3.
Page 340: Bulb Specification Chart
Maintenance Replacing the License Plate Lamp Bulb 1. Carefully release the spring clip. 2. Remove the lamp. 3. Remove the bulb. Install the new bulb in reverse order. Replacing high-mount brake lamp bulb Your vehicle is equipped with an LED center high-mount stop lamp located in the spoiler.
Page 341 Maintenance Function Number of bulbs Trade number Front fog lamp Interior front map 168 (T10) lamps Second row 168 (T10) dome/courtesy lamp * Second row dome/map lamp * Third row cargo lamp Rear cargo lamp Visor vanity lamp - Slideon rail system A6224PF (SOR) All replacement bulbs are clear in color, except where noted.
Page 342: Cleaning Products
Vehicle Care GENERAL INFORMATION Your Ford or Lincoln authorized dealer has many quality products available to clean your vehicle and protect its finishes. CLEANING PRODUCTS For best results, use the following products or products of equivalent quality: Motorcraft Bug and Tar Remover (ZC-42)
Page 343: Vehicle Care
Vehicle Care • Immediately remove items such as gasoline, diesel fuel, bird droppings and insect deposits because they can cause damage to the vehicle’s paintwork and trim over time. Use Motorcraft Bug and Tar Remover. • Note: Suntan lotions and insect repellents can damage any painted surface;...
Page 344: Waxing
Vehicle Care WAXING Regular waxing is necessary to protect the paint on your car from the elements. We recommend that you wash and wax the painted surface once or twice a year. When washing and waxing, park your vehicle in a shaded area out of direct sunlight.
Page 345: Cleaning The Windows And Wiper Blades
Vehicle Care • Spray Motorcraft Engine Shampoo and Degreaser on all parts that require cleaning and pressure rinse clean. In Canada, use Motorcraft Engine Shampoo. • Never wash or rinse the engine while it is hot or running; water in the running engine may cause internal damage.
Page 346: Cleaning The Interior
Vehicle Care CLEANING THE INTERIOR WARNING: Do not use cleaning solvents, bleach or dye on the vehicle’s safety belts, as these actions may weaken the belt webbing. WARNING: On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents. Such products could contaminate the side airbag system and affect performance of the side airbag in a collision.
Page 347: Cleaning Leather Seats
Vehicle Care • Avoid cleaners or polishes that increase the gloss of the upper portion of the instrument panel. The dull finish in this area helps protect the driver from undesirable windshield reflection. • Be certain to wash or wipe your hands clean if you have been in contact with certain products, such as insect repellent and suntan lotion, in order to avoid possible damage to the interior painted surfaces.
Page 348: Cleaning The Alloy Wheels
Vehicle Care You should: • Remove dust and loose dirt with a vacuum cleaner. • Clean and treat spills and stains as soon as possible. Do not use the following products as these may damage the leather: • Oil and petroleum or silicone-based leather conditioners. •...
Page 349: Vehicle Storage
Vehicle Care • Do not use hydrofluoric acid-based or high caustic-based wheel cleaners, steel wool, fuels or strong household detergent. • If you intend on parking your vehicle for an extended period after cleaning the wheels with a wheel cleaner, drive your vehicle for a few minutes before doing so.
Page 350 Vehicle Care Engine • The engine oil and filter should be changed prior to storage, as used engine oil contains contaminates that may cause engine damage. • Start the engine every 15 days. Run at fast idle with the climate controls set to defrost until it reaches normal operating temperature.
Page 351 Vehicle Care Removing Vehicle from Storage When your vehicle is ready to come out of storage, do the following: • Wash your vehicle to remove any dirt or grease film build-up on window surfaces. • Check windshield wipers for any deterioration. •...
Page 352: Wheels And Tires
Wheels and Tires GENERAL INFORMATION Notice to Utility Vehicle, Van and Truck Owners WARNING: Utility vehicles have a significantly higher rollover rate than other types of vehicles. To reduce the risk of serious injury or death from a rollover or other crash you must: •...
Page 353 Wheels and Tires Power is supplied to all four wheels through a transfer case or power transfer unit. Four-wheel drive vehicles allow you to select different drive modes as necessary. You can find information on transfer case operation and shifting procedures in the Transmission chapter. You can find information on transfer case maintenance in the Maintenance chapter.
Page 354: Tire Care
• The Sport, optional 265/45ZR20 summer tires are optimized for performance in both wet and dry conditions. Ford does not recommend using the original equipment tires when temperatures drop to about 40°F (5°C) or below (depending on tire wear and...
Page 355 10 to 12 inches or limited production tires as defined in Title 49 Code of Federal Regulations Part 575.104(c)(2). U.S. Department of Transportation-Tire quality grades: The U.S. Department of Transportation requires Ford Motor Company to give you the following information about tire grades exactly as the government has written it.
Page 356 Wheels and Tires Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear 1 ⁄ times as well on the government course as a tire graded 100.
Page 357 Wheels and Tires Glossary of Tire Terminology • Tire label: A label showing the OE (Original Equipment) tire sizes, recommended inflation pressure and the maximum weight the vehicle can carry. • Tire Identification Number (TIN): A number on the sidewall of each tire providing information about the tire brand and manufacturing plant, tire size and date of manufacture.
Page 358 Wheels and Tires INFORMATION CONTAINED ON THE TIRE SIDEWALL Both U.S. and Canada Federal regulations require tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides a U.S. DOT Tire Identification Number for safety standard certification and in case of a recall.
Page 359 Wheels and Tires E. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheel diameter. F. 95: Indicates the tire’s load index. It is an index that relates to how much weight a tire can carry.
Page 360 Wheels and Tires H. U.S. DOT Tire Identification Number (TIN): This begins with the letters DOT and indicates that the tire meets all federal standards. The next two numbers or letters are the plant code designating where it was manufactured, the next two are the tire size code and the last four numbers represent the week and year the tire was built.
Page 361 Wheels and Tires M. Maximum Inflation Pressure: Indicates the tire manufacturer’s maximum permissible pressure or the pressure at which the maximum load can be carried by the tire. This pressure is normally higher than the vehicle manufacturer’s recommended cold inflation pressure, which can be found on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), or Tire Label which...
Page 362 Wheels and Tires Information on T Type Tires T type tires have some additional information beyond those of P type tires. These differences are described below. T145/80D16 is an example of a tire size. Note: The temporary tire size for your vehicle may be different from this example.
Page 363 You are strongly urged to buy a reliable tire pressure gauge, as automatic service station gauges may be inaccurate. Ford recommends the use of a digital or dial-type tire pressure gauge rather than a stick-type tire pressure gauge.
Page 364 Wheels and Tires on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), or Tire Label which is located on the B-Pillar or the edge of the driver’s door. The cold inflation pressure should never be set lower than the recommended pressure on the Safety Compliance Certification Label or Tire Label.
Page 365 Wheels and Tires 6. Visually inspect the tires to make sure there are no nails or other objects embedded that could poke a hole in the tire and cause an air leak. 7. Check the sidewalls to make sure there are no gouges, cuts or bulges. Inspecting Your Tires and Wheel Valve Stems Periodically inspect the tire treads for uneven or excessive wear and remove objects such as stones, nails or glass that may be wedged in the...
Page 366 Wheels and Tires Damage Periodically inspect the tire treads and sidewalls for damage (such as bulges in the tread or sidewalls, cracks in the tread groove and separation in the tread or sidewall). If damage is observed or suspected, have the tire inspected by a tire professional. Tires can be damaged during off-road use, so inspection after off-road use is also recommended.
Page 367 (such as P-metric versus LT-metric or all-season versus all-terrain) as those originally provided by Ford. The recommended tire and wheel size may be found on either the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver’s seating position), or the Tire Label...
Page 368 The tire pressure sensors mounted in the wheels (originally installed on your vehicle) are not designed to be used in aftermarket wheels. The use of wheels or tires not recommended by Ford Motor Company may affect the operation of your tire pressure monitoring system.
Page 369 Wheels and Tires Safety Practices WARNING: If your vehicle is stuck in snow, mud, or sand, do not rapidly spin the tires. Spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to five seconds. WARNING: Do not spin the wheels at over 35 mph (56 km/h).
Page 370 Summer tires do not have the Mud and Snow (M+S or M/S) tire traction rating on the tire side wall. Since summer tires do not have the same traction performance as All-season or Snow tires, Ford does not recommend using summer tires when temperatures drop to approximately 40°F (5°C) or below (depending on tire wear and...
Page 371: Using Snow Chains
(of the same size and specifications) as chains may chip aluminum wheels. Only certain chains or snow cables have been approved by Ford as safe for use on your vehicle. You should only install chains or cables that have been rated as 10 mm or less in dimension as measured on the sidewall of your tire.
Page 372: Tire Pressure Monitoring System (Tpms)
Wheels and Tires TIRE PRESSURE MONITORING SYSTEM WARNING: The tire pressure monitoring system is NOT a substitute for manually checking tire pressure. The tire pressure should be checked periodically (at least monthly) using a tire gauge. See Inflating Your Tires in this chapter. Failure to properly maintain your tire pressure could increase the risk of tire failure, loss of control, vehicle rollover and personal injury.
Page 373 Wheels and Tires telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly. The tire pressure monitoring system complies with part 15 of the FCC rules and with RSS-210 of Industry Canada.
Page 374 Wheels and Tires When You Believe Your System Is Not Operating Properly The main function of the tire pressure monitoring system is to warn you when your tires need air. It can also warn you in the event the system is no longer capable of functioning as intended.
Page 375 Wheels and Tires Low tire Possible cause Customer action required pressure warning light Flashing Spare tire in use Repair the damaged road wheel warning light and tire assembly and reinstall it on the vehicle to restore system function. For a description on how the system functions, see When Your Temporary Spare Tire is Installed in this section.
Page 376: Changing A Road Wheel
Ford. If the dissimilar spare tire or wheel is damaged, it should be replaced rather than repaired.
Page 377 Wheels and Tires 2. Full-size dissimilar spare with label on wheel: This spare tire has a label on the wheel that states: THIS TIRE AND WHEEL FOR TEMPORARY USE ONLY When driving with one of the dissimilar spare tires listed above, do not: •...
Page 378 Wheels and Tires • Ground clearance and parking at curbs • Winter weather driving capability • Wet weather driving capability • All-wheel driving capability (if applicable) • Load leveling adjustment (if applicable) When driving with the full-size dissimilar spare tire and wheel assembly, additional caution should be given to: •...
Page 379 Wheels and Tires WARNING: Always use the jack provided as original equipment with your vehicle. If using a jack other than the one provided as original equipment with your vehicle, make sure the jack capacity is adequate for the vehicle weight, including any vehicle cargo or modifications.
Page 380 Wheels and Tires 6. Remove the wing bolt that secures the jack kit by turning it counterclockwise. 7. Remove the jack kit which includes the jack (D), wheel wrench (lug wrench) (C), L-shaped bolt (A) and the tow recovery hook (B). 8.
Page 381 Wheels and Tires 4. Small arrow-shaped marks on the sills show the location of the jacking points. 5. Remove the lug nuts with the lug wrench. 6. Replace the flat tire with the spare tire, making sure the valve stem is facing outward.
Page 382 Wheels and Tires Stowing the mini-spare and jack 1. Adjust the jack to the proper height to install the wrench. Turn the jack lead screw until the arrow on the upper link is slightly below the circle indicator shown on the lower link.
Page 383: Technical Specifications
Wheels and Tires 3. Stand the flat tire vertically in the mini-spare tub with the tire’s valve stem facing rearward toward the rear liftgate back panel. 4. Fasten the flat tire to the rear liftgate back panel by inserting the L-shaped bolt through one of the lug bolt holes in the wheel.
Page 384 N•m ⁄ x 20 * Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford recommended replacement fasteners. Note: Inspect the wheel pilot hole and mounting surface prior to installation. Remove any visible corrosion or loose particles.
Page 385: Capacities And Specifications
Capacities and Specifications ENGINE SPECIFICATIONS 3.5L V6 2.0L EcoBoost Engine 3.5L V6 engine EcoBoost engine engine Cubic inches Minimum Minimum Minimum Required fuel 87 octane 87 octane 87 octane Firing order 1–4–2–5–3–6 1–4–2–5–3–6 1-3-4-2 Ignition Coil on plug Coil on plug Coil on plug system Spark plug...
Page 386 Capacities and Specifications Engine Drivebelt Routing 3.5L / 3.5L V6 EcoBoost engines 2.0L EcoBoost engine A. Long drivebelt on the first pulley groove closer to the engine B. Short drivebelt on the second pulley groove farther from the engine 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)
Page 387 Capacities and Specifications 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)
Page 388 Capacities and Specifications 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)
Page 389 Capacities and Specifications 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)
Page 390 Capacities and Specifications 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)
Page 391 Capacities and Specifications 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)
Page 392: Part Numbers
We recommend Motorcraft replacement parts available at your Ford dealer or at fordparts.com for scheduled maintenance. These parts meet or exceed Ford Motor Company’s specifications and are engineered for your vehicle. Use of other parts may impact vehicle performance, emissions and durability. Your warranty may be void for any damage related to use of other parts.
Page 393: Vehicle Identification Number
Capacities and Specifications VEHICLE IDENTIFICATION NUMBER The vehicle identification number is located on the driver’s side instrument panel. XXXXXXXXXXXXXXXXX Please note that in the graphic, XXXX is representative of your vehicle identification number. The Vehicle Identification Number (VIN) contains the following information: A.
Page 394: Vehicle Certification Label
Capacities and Specifications VEHICLE CERTIFICATION LABEL The National Highway Traffic Safety Administration Regulations require that a Safety Compliance Certification Label be affixed to a vehicle and prescribe where the Safety Compliance Certification Label may be located. The Safety Compliance Certification Label shall be affixed to either the door hinge pillar, the door latch post, or the edge of the door near the door latch,...
Page 395: Accessories
(United States only). Ford Motor Company will repair or replace any properly authorized dealer-installed Ford Genuine Accessory found to be defective in factory-supplied materials or workmanship during the warranty period, as well as any component damaged by the defective accessories.
Page 396 • If you or an authorized Ford dealer add any non-Ford electrical or electronic accessories or components to your vehicle, you may adversely affect battery performance and durability. In addition, you may also adversely affect the performance of other electrical systems in the vehicle.
Page 397: Extended Service Plan
SERVICE PLANS (U.S. Only) More than 32 million Ford owners have discovered the powerful protection of Ford Extended Service Plan. It is the only extended service plan backed by Ford Motor Company, and provides peace of mind protection beyond the New Vehicle Limited Warranty coverage.
Page 398 • Destination assistance for taxi, shuttle, rental car coverage and emergency transportation Transferable Coverage If you sell your vehicle before your Ford Extended Service Plan coverage expires, you can transfer any remaining coverage to the new owner. Whenever you sell your vehicle, prospective buyers may have a higher degree of confidence that vehicle was properly maintained with Ford ESP, thereby improving resale value.
Page 399 Ford ESP has to offer while paying over time. You are pre-approved with no credit checks, no hassles! To learn more, call our Ford ESP specialists at 800-367-3377. Ford ESP P.O.
Page 400: Audio System
Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Note: Do not insert CDs with homemade paper (adhesive) labels into the CD player as the label may peel and cause the CD to become jammed.
Page 401 Audio System MP3 Track and Folder Structure Audio systems capable of recognizing and playing MP3 individual tracks and folder structures work as follows: • There are two different modes for MP3 disc playback: MP3 track mode (system default) and MP3 folder mode. •...
Page 402 Audio System MyFord® SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
Page 403 Audio System C. Memory presets: • In radio mode, store your favorite radio stations. To store a radio station, tune to the station, then press and hold a preset button until sound returns. • In CD mode, press one of these buttons to select a track. D.
Page 404 Audio System M. PHONE: Press this button to access the phone features of the SYNC system. See the SYNC chapter for more information. N. AUX: Press this button to access your auxiliary input jack or switch between devices you plug into the input jack or USB port. See Auxiliary input jack later in this chapter.
Page 405 Audio System SIRIUS Set Category Select to view channel categories (such as Pop, Rock or News). If you select a category, seek and scan functions only stop on channels in that category. Alerts Select to turn off or turn on alerts for songs, artists or teams.
Page 406 Audio System Clock Settings Set Time Select to set the time. Select to set the calendar date. Set Date 24h Mode Select to view clock time in a 12–hour mode or 24–hour mode. Display Settings Dimming Select to change display brightness. Language Select to display the language in English, French or Spanish.
Page 407 Audio System AM/FM/CD PREMIUM AUDIO SYSTEM WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
Page 408 Audio System E. SEEK, Reverse and Fast Forward: • In radio mode, select a frequency band and press one of these buttons. The system stops at the first station it finds in that direction. • In Sirius mode, press these buttons to select the previous or next channel.
Page 409 Audio System B. Seek, Reverse and Fast Forward: • In radio mode, select a frequency band and press one of these buttons. The system stops at the first station it finds in that direction. • In Sirius mode, press these buttons to select the previous or next channel.
Page 410 Audio System When HD Radio broadcasts are active, you can access the following functions: When you select: You can: Scan Hear a brief sampling of all available stations. This feature still works when HD Radio reception is on, although it does not scan for HD2-HD7 channels.
Page 411 Audio System HD Radio Reception and Station Troubleshooting Potential reception issues Reception area If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength. If you are listening to HD1, the system switches back to the analog broadcast until the digital broadcast is available again.
Page 412 HD Radio™ Technology manufactured under license from iBiquity Digital Corp. U.S. and foreign patents. HD Radio™ and the HD and HD Radio logos are proprietary trademarks of iBiquity Digital Corp. Ford Motor Company and iBiquity Digital Corp. are not responsible for the content sent using HD Radio technology.
Page 413: Satellite Radio Information
Note: Sirius reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
Page 414 Audio System Sirius satellite radio is a subscription-based satellite radio service that broadcasts a variety of music, sports, news, weather, traffic and entertainment programming. Your factory-installed Sirius satellite radio system includes hardware and a limited subscription term which begins on the date of sale or lease of your vehicle.
Page 415: Auxiliary Input Jack
Audio System Radio display Condition Possible action Unsubscribed Channel Your subscription does Contact Sirius at not include this 1–888–539–7474 to channel. subscribe to the channel, or tune to another channel. No Signal The signal is lost from The signal is blocked. the Sirius satellite or When you move into Sirius tower to your...
Page 416 Audio System WARNING: For safety reasons, do not connect or adjust the settings on your portable music player while your vehicle is moving. WARNING: Store the portable music player in a secure location, such as the center console or the glove box, when your vehicle is moving.
Page 417: Usb Port
Audio System USB PORT (IF EQUIPPED) WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
Page 418 SYNC® SYNC is an in-vehicle communications system that works with your Bluetooth-enabled cellular phone and portable media player. This allows you to: • Make and receive calls. • Access and play music from your portable music player. • Use 911 Assist, Vehicle Health Report and SYNC Services (Traffic, Directions &...
Page 419 SYNC® GENERAL INFORMATION Make sure you review your device’s manual before using it with SYNC. Support The SYNC support team is available to help you with any questions you cannot answer on your own. Monday-Saturday, 8:30am-9:00pm EST. Sunday, 10:30am-7:30pm EST. In the United States, call: 1–800–392–3673.
Page 420 Master Reset to erase all stored information. System data cannot be accessed without special equipment and access to the vehicle’s SYNC module. Ford Motor Company and Ford of Canada do not access the system data for any purpose other than as described...
Page 421 SYNC® USING VOICE RECOGNITION This system helps you control many features using voice commands. This allows you to keep your hands on the wheel and focus on what is in front of you. Initiating a Voice Session Push the voice icon; a tone sounds and Listening appears in the display.
Page 422 SYNC® Adjusting the Interaction Level Push the voice icon; when prompted, say “Voice settings”, then any of the following: When you say: The system: “Interaction mode standard” Provides more detailed interaction and guidance. “Interaction mode advanced” Provides less audible interaction and more tone prompts.
Page 423 SYNC® • Speak naturally, without long pauses between words. • At any time you can interrupt the system while it is speaking by pressing the voice icon. USING SYNC WITH YOUR PHONE Hands-free calling is one of the main features of SYNC. While the system supports a variety of features, many are dependent on your cellular phone’s functionality.
Page 424 SYNC® Depending on your phone’s capability and your market, the system may prompt you with questions such as setting the current phone as the primary phone (the phone SYNC automatically tries to connect with first upon vehicle start-up), downloading your phone book, etc. Pairing Subsequent Phones Note: To scroll through the menus, press the up and down arrows on your audio system.
Page 425 SYNC® “PHONE” “Call <name> at home” “Call <name> at work” OR “Call <name> in office” “Dial” “Phone book <name>” “Phone book <name> at work” OR “Phone book <name> at office” “Call history incoming” “Connections” “Go to privacy” “Hold” These commands do not require you to say “Phone” first. These commands are not available until phone information is completely downloaded using Bluetooth.
Page 426 SYNC® “DIAL” “411” (four-one-one), “911” (nine-one-one) “700 (seven hundred)” (seven hundred) “800 (eight hundred)” (eight hundred) “900 (nine hundred)” (nine hundred) “#” (pound) “<number> 0–9” “Asterisk” (*) “Clear” (deletes all entered digits) “Delete” (deletes one digit) “Plus” “Star” Note: To exit dial mode, press and hold the phone button or press MENU to go to the PHONE menu.
Page 427 SYNC® 2. When Active Call Menu is selected, press OK. 3. Scroll to cycle through the following options: When you select: You can: Mute the call. Mute Call? Switch a call from an active hands-free Privacy environment to your cellular phone for a more private conversation.
Page 428 SYNC® When you select: You can: Call History Access your call history log. 1. Press OK to select, then scroll through your call history options (incoming, outgoing or missed). 2. Press OK when the desired selection appears in the display. 3.
Page 429 SYNC® When you select: You can: Allows you to access your downloaded Phonebook phonebook. 1. Press OK to confirm and enter. If your phonebook has fewer than 255 listings, they appear alphabetically in flat file mode. If there are more, they are organized into alphabetical categories.
Page 430 SYNC® Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages. The system can also read incoming text messages to you so that you do not have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature.
Page 431 6. Press OK when the contact appears and press OK again to confirm when the system asks if you would like to send the message. Each text message is sent with the following signature: “This message was sent from my <Ford or Lincoln>”. Pre-defined text message options Can’t talk right now...
Page 432 SYNC® Pre-defined text message options I need more directions I love you Too funny Can’t wait to see you I’m stuck in traffic Accessing Your Phone Settings These are phone-dependent features. Your phone settings allow you to access and adjust features such as your ring tone, text message notification, modify your phone book and also set up automatic download.
Page 433 SYNC® When you select: You can: Modify the contents of your phone book Modify Phonebook (such as add, delete, download). Press OK to select and scroll between: Add Contacts: Press OK to add more contacts from your phone book. Push the desired contact(s) on your phone.
Page 434 SYNC® System Settings System Settings provide access to your Bluetooth Devices and Advanced menu features. Use the arrow buttons to scroll through the menu options. The Bluetooth Devices menu allows you to add, connect, delete and set a phone as primary as well as turn your Bluetooth feature on and off. The Advanced menu allows you to access and set prompts, languages, defaults, perform a master reset, install an application and view system information.
Page 435 SYNC® If you select: You can: Set Bluetooth On/Off Turn the Bluetooth feature on and off. Press OK and scroll to toggle between On and Off. When the desired selection is chosen, press OK. Note: Turning Bluetooth off disconnects all Bluetooth devices and deactivates all Bluetooth features.
Page 436 SYNC® If you select: You can: Languages Choose between English, Espanol and Francais. Once selected, all of SYNC’s radio displays and prompts are in the selected language. 1. Press OK to select and then scroll through the languages. 2. Press OK when the desired selection appears in the display.
Page 437 SYNC® SYNC APPLICATIONS AND SERVICES (IF EQUIPPED) Note: In order for the following features to work, your cellular phone must be compatible with SYNC. To check your phone’s compatibility, visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. • SYNC Services (if equipped, United States only): Provides access to traffic, directions and information such as travel, horoscopes, stock prices and more.
Page 438 SYNC® Note: Every phone operates differently. While SYNC 911 Assist works with most cellular phones, some may have trouble using this feature. If a crash deploys an airbag (excludes knee airbags and rear inflatable safety belts [if equipped]) or activates the fuel pump shut-off, your SYNC equipped vehicle may be able to contact emergency services by dialing 911 through a paired and connected Bluetooth-enabled phone.
Page 439 SYNC® In the Event of a Crash Not all crashes deploy an airbag or activate the fuel pump shut-off (which would activate 911 Assist); however, if 911 Assist is triggered, SYNC tries to contact emergency services. If a connected phone is damaged or loses connection to SYNC, SYNC searches for, and tries to connect to, any available previously paired phone and tries to make the call to 911.
Page 440: Vehicle Health Report
SYNC® Vehicle Health Report WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannot replace normal maintenance and vehicle inspection. Vehicle Health Report only monitors certain systems that are electronically monitored by the vehicle and will not monitor or report the status of any other system, (such as brake lining wear).
Page 441 Certain versions or updates to Vehicle Health Report may also collect additional vehicle information. Ford may use the vehicle information it collects for any purpose. If you do not want to disclose your cellular phone number or vehicle information, do not run the feature or set up your Vehicle Health Report profile at www.SYNCMyRide.com.
Page 442 For more information, see SYNC Services Terms and Conditions at www.SYNCMyRide.com. If you do not want Ford or its service providers to collect the vehicle travel information or other information identified in the Terms and Conditions, do not activate or use the service.
Page 443 SYNC® Connecting to SYNC Services Using Voice Commands 1. Press the voice button. 2. When prompted, say “Services”. This initiates an outgoing call to SYNC Services using your paired and connected Bluetooth-enabled cellular phone. 3. Once you are connected to the service, follow the voice prompts to request the desired service, such as “Traffic”...
Page 444 SYNC® 3. While on an active route, you can select or say “Route summary” or “Route status” to view the Route Summary turn list or the Route Status ETA. You can also turn voice guidance on or off, cancel the route or update the route.
Page 445 SYNC® SYNC AppLink™ Note: You must pair and connect your smartphone to SYNC to access AppLink. Note: iPhone users need to connect the phone to the USB port in order to start the application. We recommend you lock your iPhone after starting an application.
Page 446 SYNC® 7. Select SYNC-Media by pressing OK. 8. Scroll until <App Name> Menu is displayed (such as, Pandora Menu), then press OK. From here, you can access an application’s features, such as Thumbs up and Thumbs down. For more information, please visit www.SYNCMyRide.com.
Page 447 SYNC® 6. Press OK and scroll through selections of: • Play All • Artists • Albums • Genres • Playlists • Tracks • Explore USB • Similar Music • Return When the desired selection appears in the display, press OK to build your desired music selection.
Page 448 SYNC® “USB” “Play track <name>” “Refine album <name>” “Refine artist <name>” “Refine song <name>” “Refine track <name>” “Repeat off” “Repeat on” “Search album <name>” “Search artist <name>” “Search genre <name>” “Search song <name>” “Search track <name>” “Shuffle off” “Shuffle on” “Similar music”...
Page 449 SYNC® Voice command guide “Search/Play Genre” The system searches all the data from your indexed music and, if available, begins to play the chosen type of music. You can only play genres of music which are present in the GENRE metadata tags that you have on your digital media player.
Page 450 SYNC® 2. Scroll to cycle through: When you select: You can: Play your music by artist, album, genre, Play Menu playlists, tracks, similar music or to simply, play all. You can also choose to Explore USB to view the supported digital music files on your playing device.
Page 451 SYNC® When you select: You can: Choose to shuffle or repeat your music and Media Settings select your Autoplay settings. Once these selections are turned on, they remain on until turned off. Press SEEK to play the previous or next track. Note: Some digital media players require both USB and line in ports to stream data and music separately.
Page 452 SYNC® Accessing Your Play Menu This menu allows you to select and play your media by artist, album, genre, playlist, track, similar music or even to explore what is on your USB device. 1. Make sure that your device is plugged into the USB port and is turned on.
Page 453 SYNC® When you select: You can: Sort indexed music by genre (category) type. Genres SYNC lists the genres alphabetically in flat file mode. If there are more than 255, SYNC automatically organizes them into alphabetical categories. Press OK to select and then scroll to select the desired genre and press OK.
Page 454 SYNC® When you select: You can: Similar Music Play music similar to what is currently playing from the USB port. The system uses the metadata information of each song to compile a playlist for you. Press OK to select. The system creates a new list of similar songs and begins playing.
Page 455 SYNC® 3. Scroll until Bluetooth Devices appears. 4. Press OK and then scroll to select from: When you select: You can: Add Bluetooth Allows you to pair additional devices to the system. Device 1. Press OK to select and press OK again when Find SYNC appears in the display.
Page 456 SYNC® 3. Scroll until Advanced appears. 4. Press OK and then scroll to select from the following: When you select: You can: Have SYNC guide you via questions, helpful Prompts hints or ask you for a specific action. 1. Press OK to select and scroll to select between on or off.
Page 457 SYNC® TROUBLESHOOTING Your SYNC system is easy to use. However, should questions arise, see the tables below. Use the website at any time to check your phone’s compatibility, register your account and set preferences as well as access a customer representative via an online chat (during certain hours).
Page 458 SYNC® Phone issues Issue Possible Possible solution(s) cause(s) • Try pushing your phonebook The system says Limitations on Phonebook your phone’s contacts to SYNC by using the Downloaded but capability. Add Contacts feature. • If the missing contacts are my phonebook in SYNC is empty or stored on your SIM card, try is missing...
Page 459 SYNC® USB and media issues Issue Possible Possible solution(s) cause(s) • Try turning off the device, I am having Possible device trouble connecting malfunction. resetting the device or removing my device. the device’s battery, then trying again. • Make sure you are using the manufacturer’s cable.
Page 460 SYNC® Vehicle Health Report and SYNC Services (Traffic, Directions and Information) issues Issue Possible Possible solution(s) cause(s) • Your account • This is a free feature, but you I received a text that the Vehicle may not be must first register online to use it. •...
Page 461 SYNC® Voice command issues Issue Possible Possible solution(s) cause(s) • You may be • Review the Phone voice SYNC does not understand what using the wrong commands and the Media voice I am saying. voice commands, commands at the beginning of their respective sections.
Page 462 SYNC® Voice command issues Issue Possible Possible solution(s) cause(s) • You may be • Review the phone voice SYNC does not understand or is using the wrong commands at the beginning of calling the wrong voice commands, the phone section. •...
Page 463 • Some apps require you to register or login on the app on the phone before using them with AppLink. Also, some may have a Ford SYNC setting, so check the app’s settings menu on the phone. 2015 Explorer (exp)
Page 464 SYNC® AppLink issues Issue Possible Possible solution(s) cause(s) • Closing and restarting apps My phone is Sometime apps connected, my do not properly may help SYNC find the app(s) are close and re-open application if you cannot running, but I still their connection discover it inside the vehicle.
Page 465 SYNC® AppLink issues Issue Possible Possible solution(s) cause(s) My Android There is a Reset the Bluetooth on your phone is bluetooth bug on phone by turning it off and then connected, my some order turning Bluetooth back on. If app(s) are versions of the you are in your vehicle, SYNC running, I...
Page 466 SYNC to find. If AppLink apps limited number of the app has a Ford SYNC running on my bluetooth ports setting, disable that setting in phone listed in apps can use to the app’s settings menu on the...
Page 467 MyFord Touch® (If Equipped) GENERAL INFORMATION WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle.
Page 468 MyFord Touch® (If Equipped) This system uses a four-corner strategy to provide quick access several vehicle features and settings. The touchscreen provides easy interaction with your cellular phone, multimedia, climate control and navigation system. The corners display any active modes within those menus, such as phone status or the climate temperature.
Page 469 MyFord Touch® (If Equipped) SETTINGS Press to select any of the following: • Clock • Display • Sound • Vehicle • Settings • Help HOME Press to access your home screen. Depending on your vehicle’s option package and software, your screens may vary in appearance from the descriptions in this section.
Page 470 MyFord Touch® (If Equipped) Using the Touch-sensitive Controls on Your System To turn a feature on and off, just touch the graphic with your finger. To get the best performance from the touch-sensitive controls: • Do not press hard on the controls. They are sensitive to light touch. •...
Page 471 MyFord Touch® (If Equipped) • Phone: Press to answer a call, or to switch between calls. Press and hold to end a call, or to reject and incoming call. See the Steering Wheel chapter for more information. Cleaning the Touchscreen Display Use a clean, soft cloth such as one used for cleaning glasses.
Page 472 MyFord Touch® (If Equipped) For your safety, some SYNC functions are speed-dependent. Their use is limited to when your vehicle is traveling at speeds under 3 mph (5 km/h). Make sure that you review your device’s manual before using it with SYNC. Speed-restricted Features Some features of this system may be too difficult to use while your vehicle is moving so they are restricted from use unless your vehicle is...
Page 473 Master Reset to erase all stored information. System data cannot be accessed without special equipment and access to the vehicle’s SYNC module. Ford Motor Company and Ford of Canada do not access the system data for any purpose other than as described...
Page 474 MyFord Touch® (If Equipped) ACCESSING AND ADJUSTING MODES THROUGH YOUR RIGHT VEHICLE INFORMATION DISPLAY (IF EQUIPPED) The display is located on the right side of your instrument cluster. You can use your steering wheel controls to view and make minor adjustments to active modes without taking your hands off the wheel.
Page 475: Voice Recognition
MyFord Touch® (If Equipped) Audio Sources and Memory Presets Use the OK and arrow buttons on the right side of your steering wheel to scroll through the available modes. You can make selections from the menu by using the OK button. The selection menu expands and different options appear.
Page 476 MyFord Touch® (If Equipped) How to Use Voice Commands with Your System Press the voice icon. After the tone, speak your command clearly. These commands can be said at any time. “Cancel” “Exit” “Go back” “List of commands” “Main menu” “Next page”...
Page 477 MyFord Touch® (If Equipped) Accessing a List of Available Commands • If you use the touchscreen, press the Settings icon > Help > Voice Command List. • If you use the steering wheel control, press the voice icon. After the tone, speak your command clearly.
Page 478 MyFord Touch® (If Equipped) Confirmation Prompts: The system uses these short questions to confirm your voice request. If turned off, the system simply makes a best guess as to what you requested. The system may still occasionally ask you to confirm settings. Phone/Media Candidate Lists: Candidate lists are lists of possible results from your voice commands.
Page 479 MyFord Touch® (If Equipped) ENTERTAINMENT A. AM 1 and AM AST B. FM 1, FM 2 and FM AST C. SIRIUS D. CD E. USB F. Touch this button to scroll down for more options, such as: • SD Card •...
Page 480 MyFord Touch® (If Equipped) Browsing Device Content When listening to audio on a device, you can browse through other devices without having to change sources. For example, if you are currently listening to audio on an SD card, you can browse all the artists that are stored on your USB device.
Page 481: Listening To Music
MyFord Touch® (If Equipped) Your voice system allows you to change audio sources with a simple voice command. For example, if you are listening to music on a USB device, then want to switch to a satellite radio channel, simply press the voice button on the steering wheel controls and say the name of the Sirius station (such as, “the Highway”).
Page 482 MyFord Touch® (If Equipped) Scan Touch this button to go to the next strong AM or FM radio station. The light on the button illuminates when the feature is on. Options Sound Settings allows you to adjust settings for: • Bass •...
Page 483 MyFord Touch® (If Equipped) more information, and a guide to available stations and programming, please visit www.hdradio.com. When HD Radio is on and you tune to a station broadcasting HD Radio technology, you may notice the following indicators on your screen: HD) logo is grey when acquiring a digital station, and then changes to orange when digital audio is playing.
Page 484 MyFord Touch® (If Equipped) HD Radio Reception and Station Troubleshooting Potential Reception Issues Reception area If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength.
Page 485 HD Radio Technology manufactured under license from iBiquity Digital Corp. U.S. and foreign patents. HD Radio and the HD and HD Radio logos are proprietary trademarks of iBiquity Digital Corp. Ford Motor Company and iBiquity Digital Corp. are not responsible for the content sent using HD Radio technology.
Page 486 MyFord Touch® (If Equipped) Radio Voice Commands If you are listening to the radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to the radio, press the voice button and, after the tone, say “Radio”, then any of the commands in the following chart.
Page 487 MyFord Touch® (If Equipped) Sirius Satellite Radio (If Activated) Press the lower left corner of the touchscreen, then select the SIRIUS tab. Presets Save a channel by pressing and holding one of the memory preset areas. There is a brief mute while the radio saves the channel. Sound returns when finished.
Page 488 Note: Sirius does not support the Alert feature on all channels. Ford Motor Company shall not be responsible for Alert feature variation. Electronic Serial Number (ESN) is required when you need to activate, modify or track your satellite radio account.
Page 489 MyFord Touch® (If Equipped) Satellite Radio Voice Commands If you are listening to Sirius satellite radio, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to Sirius satellite radio, press the voice button and, after the tone, say “Sirius”, then any of the commands in the following chart.
Page 490 Note: Sirius reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
Page 491 MyFord Touch® (If Equipped) Potential satellite radio reception issues Station overload When you pass a ground-based broadcast-repeating tower, a stronger signal may overtake a weaker one and the audio system may mute. Your display may show ACQUIRING . . . to Satellite radio signal interference indicate the interference and the audio...
Page 492 MyFord Touch® (If Equipped) Sirius troubleshooting tips Radio display Condition Possible action Updating. Update of channel No action required. programming in The process may take progress. up to three minutes. Call SIRIUS Your satellite service is Contact Sirius at 1–888–539–7474. no longer available.
Page 493 MyFord Touch® (If Equipped) Options Sound Settings allows you to adjust settings for: • Bass • Midrange • Treble • Balance and Fade • DSP (Digital Signal Processing) • Occupancy Mode • Speed Compensated Volume. Note: Your vehicle may not have all these sound settings. Compression allows you to turn the compression feature on and off.
Page 494 MyFord Touch® (If Equipped) SD Card Slot and USB Port SD Card Slot Note: Your SD card slot is spring-loaded. To remove the SD card, press the card in and the system ejects it. Do not attempt to pull the card to remove it as this could cause damage.
Page 495 MyFord Touch® (If Equipped) Playing Music from Your Device Note: The system is capable of indexing up to 30,000 songs. Insert your device and select the SD Card or USB tab once the system recognizes it. You can then select from the following options: Repeat replays the currently playing song or album.
Page 496 MyFord Touch® (If Equipped) SD Card and USB Voice Commands If you are listening to a USB device or an SD card, press the voice button on the steering wheel control. When prompted, say any of the commands in the following chart. If you are not listening to a USB device or an SD card, press the voice button and, after the tone, say “USB”...
Page 497 MyFord Touch® (If Equipped) “BROWSE” “All artists” “Artist <name>” “All audiobooks” “Audiobook <name>” “All authors” “Author <name>” “All composers” “Composer <name>” “All folders” “Folder <name>” “All genres” “Genre <name>” “All movies” “Playlist <name>” “All music videos” “Podcast <name>” “All playlists” “TV show <name>”...
Page 498 MyFord Touch® (If Equipped) Bluetooth Audio Your system allows you to stream audio over your vehicle’s speakers from your connected, Bluetooth-enabled cellular phone. To access, press the lower left corner on the touchscreen, then select the BT Stereo tab. Bluetooth Audio Voice Commands If you are listening to a Bluetooth audio device, press the voice button on the steering wheel control.
Page 499 MyFord Touch® (If Equipped) The auxiliary input jack allows you to connect and play music from your portable music player through your vehicle speakers. You can use any portable music player designed for use with headphones. Your audio extension cable must have male ⁄...
Page 500 MyFord Touch® (If Equipped) PHONE A. Phone B. Quick Dial C. Phonebook D. History E. Messaging F. Settings Hands-free calling is one of the main features of SYNC. Once you pair your phone, you can access many options using the touchscreen or voice commands.
Page 501: Pairing Your Phone For The First Time
MyFord Touch® (If Equipped) Pairing Your Phone for the First Time WARNING: Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road.
Page 502 MyFord Touch® (If Equipped) 4. When prompted on your phone’s display, confirm that the PIN provided by SYNC matches the PIN displayed on your cellular phone. 5. The display indicates when the pairing is successful. SYNC may prompt you with more phone options. For more information on your phone’s capability, see your phone’s user guide and visit the website.
Page 503 MyFord Touch® (If Equipped) Phonebook Touch this button to access and call any contacts in your previously downloaded phone book. The system places the entries in alphabetical categories summarized at the top of the screen. To turn on contact picture settings, if your device supports this feature, press Phone >...
Page 504 MyFord Touch® (If Equipped) Composing a Text Message Note: This is a speed-dependent feature. It is unavailable when your vehicle is traveling at speeds over 3 mph (5 km/h). Note: Downloading and sending text messages using Bluetooth are phone-dependent features. 1.
Page 505 MyFord Touch® (If Equipped) • Ignore to exit the screen. Note: If you select View and your vehicle is traveling over 3 mph (5 km/h), the system offers to read the message to you instead of allowing you to view it while driving. Phone Settings Press Phone >...
Page 506 MyFord Touch® (If Equipped) Roaming Warning Touch this button to have the system alert you when your phone is in roaming mode. Phone Voice Commands Press the voice button on the steering wheel control. After the tone, say any of the following commands: “PHONE”...
Page 507: Information Menu
Note: SYNC Services varies by trim level and model year and may require a subscription. Traffic alerts and turn-by-turn directions available in select markets. Message and data rates may apply. Ford Motor Company reserves the right to change or discontinue this product service at any time without prior notification or incurring any future obligation.
Page 508 For more information, see SYNC Services Terms and Conditions at www.SYNCMyRide.com. If you do not want Ford or its service providers to collect your vehicle travel information or other information identified in the Terms and Conditions, do not subscribe or use the service.
Page 509 MyFord Touch® (If Equipped) Connecting to SYNC Services Using the Touchscreen If your vehicle is equipped with Navigation, touch the i (Information) button to access these features. If your vehicle is not equipped with Navigation, touch the corner of the touchscreen with the green tab.
Page 510 MyFord Touch® (If Equipped) If you miss a turn, SYNC automatically asks if you want the route updated. Just say, “Yes” when prompted and the system delivers a new route to your vehicle. If your vehicle is equipped with Navigation, SYNC Services downloads your requested destination to the navigation system.
Page 511 Sirius Travel Link. Note: Neither Sirius nor Ford is responsible for any errors or inaccuracies in the Sirius Travel Link services or its use in vehicles. When you subscribe to Sirius Travel Link, it can help you locate the best...
Page 512 MyFord Touch® (If Equipped) Traffic On Route and Traffic Nearby Touch these buttons to identify traffic incidents on your route, nearby your vehicle’s current location or near any of your favorite places, if programmed. Fuel Prices Touch this button to view fuel prices at stations close to your vehicle’s location or on an active navigation route.
Page 513 MyFord Touch® (If Equipped) Travel Link voice commands “Sports headlines” “Weather” “Sports schedule” “Weather map” If you have said, “Sports headlines”, “Sports schedule” or “Sports scores”, you may say any of the commands in the “Sports headlines, Sports schedules and Sports scores” commands chart: If you have said, “Travel Link”, you may say any of the commands in the “Travel Link”...
Page 514 MyFord Touch® (If Equipped) Alerts If your vehicle is equipped with Navigation, touch the i (Information) button to access these features. If your vehicle is not equipped with Navigation, touch the corner of the touchscreen with the green tab. Press Alerts, and then choose from any of the following services: •...
Page 515 MyFord Touch® (If Equipped) Note: Before setting this feature on, make sure that you read the 911 Assist privacy notice later in this section for important information. Note: If any user turns 911 Assist on or off, that setting applies for all paired phones.
Page 516 MyFord Touch® (If Equipped) • The vehicle must have battery power and be located in the United States, Canada or in a territory in which 911 is the emergency number. In the Event of a Crash Not all crashes deploy an airbag or activate the fuel pump shut-off (which would trigger 911 Assist);...
Page 517 MyFord Touch® (If Equipped) Vehicle Health Report (If Equipped, United States Only) WARNING: Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannot replace, normal maintenance and vehicle inspection. Vehicle Health Report only monitors certain systems electronically monitored by your vehicle and will not monitor or report the status of any other system, (such as brake lining wear).
Page 518 “Vehicle health report”. Vehicle Health Report Privacy Notice When you create a Vehicle Health Report, Ford Motor Company may collect your cellular phone number (to process your report request) and diagnostic information about your vehicle. Certain versions or updates to Vehicle Health Report may also collect more vehicle information.
Page 519: Settings
MyFord Touch® (If Equipped) SETTINGS A. Clock B. Display C. Sound D. Vehicle E. Settings F. Help Under this menu, you can set your clock, access and adjust the display, sound and vehicle settings as well as access settings for specific modes or the help feature.
Page 520 MyFord Touch® (If Equipped) You can also turn the outside air temperature display on and off. It appears at the top center of the touchscreen, next to the time and date. The system automatically saves any updates you make to the settings. Display You can adjust the touchscreen display through the touchscreen or by pressing the voice button on your steering wheel controls and when...
Page 521 MyFord Touch® (If Equipped) • Each file must be 1.5 MB or less. • Recommended dimensions: 800 x 384. Sound Press the Settings icon > Sound, then select from the following: Sound Settings Bass Midrange Occupancy Mode Treble Speed Compensated Volume Set Balance and Fade If equipped.
Page 522 MyFord Touch® (If Equipped) Door Keypad Code To change the keypad code for your keyless entry keypad system: 1. Press the Settings icon > Vehicle > Door Keypad Code. 2. Enter your current factory code, then, when prompted, enter your new code.
Page 523 MyFord Touch® (If Equipped) System Touch Panel Button Select to have the system beep to confirm Beep button choices made through the climate or audio system. Keyboard Layout Have the touchscreen keyboard display in QWERTY or ABC format. Install Applications Install any downloaded applications or view the current software licenses.
Page 524 MyFord Touch® (If Equipped) Media Player Press the Settings icon > Settings > Media Player, then select from the following: Media player Autoplay When this feature is on, the system automatically switches to the media source upon initial connection. This allows you to listen to music during the indexing process.
Page 525 MyFord Touch® (If Equipped) Navigation Press the Settings icon > Settings > Navigation, then select from the following: Navigation Map Preferences Turn breadcrumbs on and off. Have the system display your turn list top to bottom or bottom to top. Turn the Parking POI notification on and off.
Page 526 MyFord Touch® (If Equipped) Navigation Traffic Preferences Have the system display areas where roadwork occurs. Have the system display incident icons. Have the system display areas where difficult driving conditions may occur. Have the system display areas where snow and ice on the road may occur. Have the system display any smog alerts.
Page 527 MyFord Touch® (If Equipped) Phone Settings Press the Settings icon > Settings > Phone, then select from the following: Phone Bluetooth Devices Connect, disconnect, add or delete a device, as well as save it as a favorite. Bluetooth Turn Bluetooth on and off. Do Not Disturb Have all calls go directly to your voice mail and not ring inside your vehicle.
Page 528 MyFord Touch® (If Equipped) Wireless & Internet Your system has a Wi-Fi feature that creates a wireless network within your vehicle, thereby allowing other devices (such as personal computers or phones) in your vehicle to speak to each other, share files or play games.
Page 529 MyFord Touch® (If Equipped) Wireless & Internet USB Mobile Instead of using Wi-Fi, your system can also Broadband use a USB mobile broadband connection to access the internet. (You must turn on your mobile broadband device on your personal computer before connecting it to the system.) This screen allows you to set up what is your typical area for your USB mobile broadband connection.
Page 530 MyFord Touch® (If Equipped) Help Press the Settings icon > Help, then select from the following: Help Where Am I? View your vehicle’s current location, if your vehicle is equipped with navigation. If your vehicle is not equipped with navigation, nothing displays. Touchscreen system serial number.
Page 531 MyFord Touch® (If Equipped) CLIMATE Touch the lower right corner on the touchscreen to access your climate control features. Depending on your vehicle line and option package, your climate screen may look different from this screen. Note: You can switch temperature units between Fahrenheit and Celsius. See Settings in this chapter.
Page 532 MyFord Touch® (If Equipped) C. Fan speed: Touch + or - to increase or decrease the volume of air circulated in your vehicle. Note: When the system is controlling the fan speed automatically, all the fan speed indicators turn off. D.
Page 533 MyFord Touch® (If Equipped) I. Heated rear window: Turns the heated rear window on and off. See Heated windows and mirrors in the Climate Control chapter. J. Defrost: Touch the button to distribute air to the windshield vents and de-mister. Air distribution to instrument panel and footwell vents turn off.
Page 534: Navigation System
MyFord Touch® (If Equipped) There are additional climate control commands but in order to access them, you have to say “Climate” first, then when the system is ready to listen, you may say any of the following commands: Additional climate control voice commands “Automatic”...
Page 535 MyFord Touch® (If Equipped) Your navigation system is comprised of two main features, destination mode and map mode. To set a destination, press the green corner of your touchscreen, then Dest when it appears. See Setting a destination later in this chapter. To view the navigation map and your vehicle’s current location, touch the green bar in the upper right hand corner of the touchscreen, or, press Dest >...
Page 536 MyFord Touch® (If Equipped) During route guidance, you can press the talking bubble icon that appears in the upper right navigation corner (green bar) if you want the system to repeat route guidance information. When the system repeats the last guidance instruction, it updates the distance to the next guidance instruction, since it detects when the vehicle is moving.
Page 537 MyFord Touch® (If Equipped) cityseekr (If Available) Note: cityseekr point of interest information is limited to approximately 912 cities (881 in the United States, 20 in Canada and 11 in Mexico). cityseekr, when available, is a service that provides more information about certain points of interest such as restaurants, hotels and attractions.
Page 538 MyFord Touch® (If Equipped) This icon appears when your selection exists in multiple categories within the system. When you are viewing more information for hotels, cityseekr also tells you if the hotel has certain services and facilities using icons. Hotel services and facilities Restaurant 24 Hr Room Service Business Center...
Page 539 MyFord Touch® (If Equipped) Route Preferences Preferred Route allows you to choose to have the system display the Shortest, Fastest or most Ecological route first. If you set Always Use Preferred Route to Yes, the system uses the selected route type to calculate only one route to the desired destination.
Page 540 MyFord Touch® (If Equipped) Avoid Areas Avoid Areas allows you to choose areas which you want the system to avoid when calculating a route for you. Press Add to program an entry. Once you make a selection, the system tries to avoid the area(s) if possible for all routes. To delete a selection, choose the listing on the screen.
Page 541 MyFord Touch® (If Equipped) 3D map mode provides an elevated perspective of the map. This viewing angle can be adjusted and the map can be rotated 180 degrees by touching the map twice, and then dragging your finger along the shaded bar with arrows at the bottom of the map. View switches between full map, street list and exit view in route guidance.
Page 542 MyFord Touch® (If Equipped) Address book entry default icon(s) indicates the location on the map of an address book entry. This is the default symbol shown after the entry has been stored to the Address Book by any method other than the map. You can select from any of the 22 icons available.
Page 543 MyFord Touch® (If Equipped) Set as Waypoint Touch this button to set the current location as a waypoint. Save to Favorites Touch this button to save the current location to your favorites. POI Icons Touch this button to select icons to display on the map. You can select up to three icons to display on the map at the same time.
Page 544 MyFord Touch® (If Equipped) Navigation Voice Commands When in navigation mode, press the voice button on the steering wheel control. After the tone, say any of the following commands: Navigation system voice commands “Cancel next waypoint” “Navigation” “Cancel route” “Navigation voice volume decrease” “Destination”...
Page 545 MyFord Touch® (If Equipped) “DESTINATION” “Play nametags” “POI category” “Previous destination” “Street address” “Help” “NAVIGATION” “Destination” “Zoom city” “Zoom country” “Zoom in minimum” “Zoom out maximum” “Zoom province” “Zoom state” “Zoom street” “Zoom to <distance>” “Help” If you have said, “Destination”, you may say any of the commands in the Destination chart.
Page 546 MyFord Touch® (If Equipped) TROUBLESHOOTING Your SYNC system is easy to use. However, should questions arise, see the tables below. Use the website at any time to check your phone’s compatibility, register your account and set preferences as well as access a customer representative via an online chat (during certain hours).
Page 547 MyFord Touch® (If Equipped) Phone issues Issue Possible Possible solution(s) cause(s) • Try pushing your phonebook The system says Limitations on Phonebook your phone’s contacts to SYNC by using the Downloaded but capability. Add Contacts feature. • If the missing contacts are my phonebook in SYNC is empty or stored on your SIM card, try...
Page 548 MyFord Touch® (If Equipped) USB and media issues Issue Possible Possible solution(s) cause(s) • Try turning off the device, I am having Possible device trouble connecting malfunction. resetting the device or removing my device. the device’s battery, then trying again. •...
Page 549 MyFord Touch® (If Equipped) Vehicle Health Report and SYNC Services (Traffic, Directions and Information) issues Issue Possible Possible solution(s) cause(s) • Your account • This is a free feature, but you I received a text that the Vehicle may not be must first register online to use it.
Page 550 MyFord Touch® (If Equipped) Voice command issues Issue Possible Possible solution(s) cause(s) • You may be • Review the Phone voice SYNC does not understand what using the wrong commands and the Media voice I am saying. voice commands, commands at the beginning of their respective sections.
Page 551 MyFord Touch® (If Equipped) Voice command issues Issue Possible Possible solution(s) cause(s) • You may be • Review the phone voice SYNC does not understand or is using the wrong commands at the beginning of calling the wrong voice commands, the phone section.
Page 552 MyFord Touch® (If Equipped) MyFord Touch System Reset The MyFord Touch system has System Reset feature that can be performed if the function of a SYNC feature is lost. This reset is intended to restore functionality and will not erase any information previously stored in the system (such as paired devices, phonebook, call history, text messages, or user settings).
Page 553: Appendices
SYNC® End User License Agreement (EULA) • You have acquired a device (“DEVICE”) that includes software licensed by Ford Motor Company and its affiliates (“FORD MOTOR COMPANY”) from an affiliate of Microsoft Corporation (“MS”). Those installed software products of MS origin, as well as associated media, printed materials, and “online”...
Page 554 Neither FORD MOTOR COMPANY nor its suppliers shall be liable for any damages arising out of errors in the speech recognition process.
Page 555 SOFTWARE after the date you obtain your initial copy of the SOFTWARE (“Supplemental Components”). If FORD MOTOR COMPANY or third party software and services suppliers provide or make available to you Supplemental Components and no other EULA terms are provided along with the Supplemental Components, then the terms of this EULA shall apply.
Page 556 DEVICE. UPGRADES AND RECOVERY MEDIA: If the SOFTWARE is provided by FORD MOTOR COMPANY separate from the DEVICE on media such as a ROM chip, CD ROM disk(s) or via web download or other means, and is labeled “For Upgrade Purposes Only” or For Recovery Purposes...
Page 557 For additional information, see http://www.microsoft.com/exporting/. TRADEMARKS: This EULA does not grant you any rights in connection with any trademarks or service marks of FORD MOTOR COMPANY, MS, Microsoft Corporation, third party software or service providers, their affiliates or suppliers.
Page 558 Appendices Adobe Contains Adobe® [Flash® Player] or [AIR®] technology by Adobe Systems Incorporated. This [Licensee Product] contains [Adobe® Flash® Player] [Adobe® AIR®] software under license from Adobe Systems Incorporated, Copyright 1995-2009 Adobe Macromedia Software LLC. All rights reserved. Adobe, Flash and AIR are trademarks of Adobe Systems Incorporated.
Page 559 End user notice Microsoft® Windows® Mobile for Automotive Important Safety Information This system Ford SYNC contains software that is licensed to Manufacturer FORD MOTOR COMPANY by an affiliate of Microsoft Corporation pursuant to a license agreement. Any removal, reproduction, reverse engineering or other unauthorized use of the software from this system in violation of the license agreement is strictly prohibited and may subject you to legal action.
Page 560 Appendices Keep User’s Guide in Vehicle When kept in the vehicle, the User’s Guide will be a ready reference for you and other users unfamiliar with the Windows Automotive-based system. Please make certain that before using the system for the first time, all persons have access to the User’s Guide and read its instructions and safety information carefully.
Page 561 Appendices otherwise require your undivided attention, and you therefore agree to comply with the following when using the Telenav Software: (a) observe all traffic laws and otherwise drive safely; (b) use your own personal judgment while driving. If you feel that a route suggested by the Telenav Software instructs you to perform an unsafe or illegal maneuver, places you in an unsafe situation, or directs you into an area that you consider to be unsafe, do not follow such instructions;...
Page 562 Appendices names, logos, patent or copyright notices, or other notices or markings; (d) distribute, sublicense or otherwise transfer the Telenav Software to others, except as part of your permanent transfer of the Telenav Software; or (e) use the Telenav Software in any manner that (i) infringes the intellectual property or proprietary rights, rights of publicity or privacy or other rights of any party, (ii) violates any law, statute, ordinance or regulation, including but not limited to laws and regulations...
Page 563 Appendices DAMAGES (INCLUDING IN EACH CASE, BUT NOT LIMITED TO, DAMAGES FOR THE INABILITY TO USE THE EQUIPMENT OR ACCESS DATA, LOSS OF DATA, LOSS OF BUSINESS, LOSS OF PROFITS, BUSINESS INTERRUPTION OR THE LIKE) ARISING OUT OF THE USE OF OR INABILITY TO USE THE TELENAV SOFTWARE, EVEN IF TELENAV HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Page 564 Appendices terms and conditions of this Agreement. Any such sale, assignment or transfer that is not expressly permitted under this paragraph will result in immediate termination of this Agreement, without liability to Telenav, in which case you and all other parties shall immediately cease all use of the Telenav Software.
Page 565 Appendices 9. Other Vendors Terms and Conditions The Telenav Software utilizes map and other data licensed to Telenav by third party vendors for the benefit of you and other end users. This Agreement includes end-user terms applicable to these companies (included at the end of this Agreement), and thus your use of the Telenav Software is also subject to such terms.
Page 566 Appendices License Limitations on Transfer: Your limited license does not allow transfer or resale of the Data, except on the condition that you may transfer the Data and all accompanying materials on a permanent basis if: (a) you retain no copies of the Data; (b) the recipient agrees to the terms of this End-User License Agreement;...
Page 567 Appendices IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT, WHICH MAY RESULT FROM THE USE OR POSSESSION OF THIS DATA;...
Page 568 Appendices Asia Pacific region provided to you hereunder, and (b) The Netherlands for Data for Europe, the Middle East and/or Africa provided to you hereunder. Government End Users: If the Data is being acquired by or on behalf of the United States government or any other entity seeking or applying rights similar to those customarily claimed by the United States government, this Data is a “commercial item”...
Page 569 Appendices Gracenote® End User License Agreement (EULA) This device contains software from Gracenote, Inc. of 2000 Powell Street Emeryville, California 94608 (“Gracenote”). The software from Gracenote (the “Gracenote Software”) enables this device to do disc and music file identification and obtain music-related information, including name, artist, track, and title information (“Gracenote Data”) from online servers (“Gracenote Servers”), and to perform other functions.
Page 570 Appendices THE GRACENOTE SOFTWARE, EACH ITEM OF GRACENOTE DATA AND THE GRACENOTE CONTENT ARE LICENSED TO YOU “AS IS.” NEITHER GRACENOTE MAKES ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, REGARDING THE ACCURACY OF ANY GRACENOTE DATA FROM THE GRACENOTE SERVERS OR GRACENOTE CONTENT.
Page 571 Appendices WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The term “IC:” before the radio certification number only signifies that Industry Canada technical specifications were met. The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Page 572: Scheduled Maintenance
Parts installed at your dealership carry a nationwide 24-month or unlimited miles (kilometers) parts and labor limited warranty. If you do not use Ford authorized parts they may not meet our specifications and depending on the part, it could affect emissions compliance.
Page 573 Ford Motor Company has recommended maintenance intervals for various parts and component systems based upon engineering testing. Ford Motor Company relies upon this testing to determine the most appropriate mileage for replacement of oils and fluids to protect your vehicle at the lowest overall cost to you and recommends against maintenance schedules that deviate from the scheduled maintenance information.
Page 574 It is critical that systems are flushed only with new fluid that is the same as that required to fill and operate the system, or using a Ford-approved flushing chemical. Owner Checks and Services Certain basic maintenance checks and inspections should be performed every month or at six month intervals.
Page 575 In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly. This can help identify potential issues and prevent major problems. Ford Motor Company recommends the following multi-point inspection be performed at every scheduled maintenance interval to help make sure your vehicle keeps running great.
Page 576 Scheduled Maintenance 2015 Explorer (exp) Owners Guide gf, 2nd Printing, September 2014 USA (fus)
Page 577: Normal Scheduled Maintenance And Log
Scheduled Maintenance NORMAL SCHEDULED MAINTENANCE AND LOG Intelligent Oil-Life Monitor® Your vehicle is equipped with an Intelligent Oil-Life Monitor that determines when the engine oil needs to be changed based on how your vehicle is used. By using several important factors in its calculations, the monitor helps reduce the cost of owning your vehicle and reduce environmental waste at the same time.
Page 578 Scheduled Maintenance Normal scheduled maintenance At every oil change Change engine oil and filter. interval as indicated by Rotate tires, inspect tire wear and measure the information display tread depth. Perform multi-point inspection (recommended). Inspect automatic transmission fluid level (if equipped with dipstick).
Page 579 Scheduled Maintenance Other maintenance items Every 20000 miles Replace cabin air filter (if equipped). (32000 km) Every 30000 miles Replace climate-controlled (heated and (48000 km) cooled) seat filter. Replace engine air filter. At 100000 miles Change engine coolant. (160000 km) Every 100000 miles Replace spark plugs.
Page 580 Scheduled Maintenance Maintenance Schedule Log EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS...
Page 581 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
Page 582 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
Page 583 Scheduled Maintenance SPECIAL OPERATING CONDITIONS If you operate your vehicle primarily in any of the following conditions, you need to perform additional maintenance as indicated. If you occasionally operate your vehicle under any of these conditions, it is not necessary to perform the additional maintenance. For specific recommendations, see your dealership service advisor or technician.
Page 584 Scheduled Maintenance Extensive idling or low-speed driving for long distances as in heavy commercial use (such as delivery, taxi, patrol car or livery) As required Change engine oil and filter as indicated by the information display and perform services listed in the Normal Scheduled Maintenance chart.
Page 585 Scheduled Maintenance Special Operating Condition Log EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#:...
Page 586 Scheduled Maintenance EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE...
Page 587 Board has determined that the failure to perform this maintenance item does not nullify the emission warranty or limit recall liability before the completion of your vehicle’s useful life. Ford Motor Company, however, urges you to have all recommended maintenance services performed at the specified intervals and to record all vehicle service.
Page 588: Engine Coolant Change Log
Scheduled Maintenance Engine Coolant Change Log EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#: OURS OURS ILEAGE ILEAGE EALER ALIDATION EALER ALIDATION P&A C P&A C RO#: RO#:...
Page 589: Manual Heating And Air Conditioning
Index 911 Assist™ ......436, 513 Air filter, cabin ......153 All Wheel Drive (AWD), driving off road ......212 Ambient mood/lighting .....520 ABS (see Brakes) .....220 Ambulance packages ....16 Accessing and using your USB port ..........493 AM/FM ........480 Accessing call history/phone Antifreeze book during active call .....425 (see Engine coolant) ....316 Accessing your calendar ..513...
Page 590 Cross Traffic Alert ....254 CD ......401, 406–407 Cruise control ......239 CD player ......399, 491 Customer Assistance ....286 CD voice commands ....492 Ford Extended Service Cell phone use ......17 Plan ..........396 Getting roadside assistance ...286 Changing a tire ......375 Getting the service you Changing the air filter ....332...
Page 591: Dual Automatic Temperature Control
Index Dipstick refill capacities ......386 automatic transmission specifications ......386 fluid ..........322 Event data recording ....13 engine oil .........315 Exhaust fumes ......192 Display settings ......519 Driver alert ........248 Driving under special conditions ....211, 214, 216 Fail safe cooling ......320 sand .........215 Fleet MyKey programming ..69 snow and ice ......217 through water ....216, 284...
Page 592 Index Gauges .......115–116 odometer .........127 Jack ..........375 trip odometer ......127 positioning .......375 storage ........375 Joining two calls (multiparty/conference call) ..425 Hazard flashers ......288 Jump-starting your vehicle ..289 HD Radio™ .......481 Headlamps aiming ........333 Keyless entry system bulb specifications ....339 autolock ........76 flash to pass ......98 keypad ........82 high beam ......98, 101...
Page 593 Index Lug nuts ........382 Parental MyKey programming ...69 Park Assist ........230 Parking brake ......220 Making and receiving calls ..501 Parts MAP DVD - Loading and (see Motorcraft® parts) ..391 Unloading ........501 Passenger Occupant Map icons ........540 Classification Sensor ....54 Map mode ........539 Phone Bluetooth menu options Map preferences .......537 (adding, connecting, deleting,...
Page 594: Rear Window Defroster
Index Safety information ....418, 470 Safety restraints ....40–41, 43 Radio ......401, 406–407 Belt-Minder® ......44 AM/FM ........480 Belt-Minder®, Single CD ....401, 406–407 deactivating/activating .....45 Radio reception ......399 extension assembly ....43 Radio voice commands .....485 for adults ......40–41 for children .......25 Rear heated seats .....167 inflatable safety belt ....46 Rear view camera Occupant Classification...
Page 595 Index SecuriLock passive anti-theft Supplemental Restraint System system ..........85 (SRS) (see airbags) ....52 Selecting your media source Supported media file types ..496 (USB, Line in, BT audio) ..448 Supported player, media Sending new text messages ..503 formats and metadata information ........496 Setting a destination ....533 Setting a destination by SYNC®...
Page 596: Wrecker Towing
Index Touchscreen features Vehicle Identification Number (climate) ........530 (VIN) ..........392 Towing .......273, 280–281 Vehicle loading ......265 recreational towing ....281 Ventilating your vehicle ...192 trailer towing ......273 wrecker ........280 Voice commands in media mode ..........446 Traction control ......222 Voice commands in phone Traffic, Directions and Information ........441 mode ..........423...

Ford EXPLORER 2015 Owner's Manual

Table of Contents

Table of Contents

Table of Contents

Table of Contents

Introduction

Child Safety

Safety Belts

Personal Safety System

Supplementary Restraints System

Keys and Remote Control

Mykey

Wipers and Washers

Windows and Mirrors

Instrument Cluster

Seats

Universal Garage Door Opener (if Equipped) 177

Quick Links

Troubleshooting

Related Manuals for Ford EXPLORER 2015

Summary of Contents for Ford EXPLORER 2015