Memory Feature (If Equipped); Programming Memory To The Remote Control - Ford EXPLORER 2015 Owner's Manual

Keys and Remote Control

Memory Feature (If Equipped)

The memory feature allows you to recall the driver seat, power mirrors,
power adjustable pedal and power steering column (if equipped) memory
positions.
Press the unlock button on the remote control or activate intelligent
access to recall memory. The mirrors and pedals will move to the
memory position and the seat and steering column will move to the easy
entry position (if you have switched on the easy entry feature). The seat
and column will move to the final position when you switch on the
ignition.

Programming Memory to the Remote Control

1. Turn the ignition on.
1 2
4. Press the lock button on the remote control within three seconds.
5. Repeat this procedure for another memory button and transmitter if
desired.
2015 Explorer (exp)
Owners Guide gf, 2nd Printing, September 2014
USA (fus)
3. Remove the old battery.
4. Insert a new battery with the + facing
downward. Press the battery down to make
sure it is fully in the housing.
5. Snap the battery cover back onto the
transmitter and install the backup key.
2. Move the memory features to the
desired positions using the
associated controls.
3. Press and hold memory button 1,
located on the driver seat side, for
five seconds. A tone will sound in
about two seconds. Continue to hold
until you hear a second tone.
65