Ford EXPLORER 2015 Owner's Manual page 325

324
4. Remove two bolts that attach the air filter assembly to the front of the
vehicle (2).
5. Loosen the clamp holding the air filter assembly to the rubber hose
(1).
6. Remove the harness retaining clip by pulling up (3). Do not
disconnect the sensor (4).
7. Without disconnecting the sensor (4), pull the air filter assembly up to
disconnect the air filter assembly from the seated grommets located
underneath the air filter assembly.
9. Tighten the clamp (1).
10. The transmission fluid level indicator can now be accessed.
2015 Explorer (exp)
Owners Guide gf, 2nd Printing, September 2014
USA (fus)
Maintenance
3. Remove the bolt cover (if
equipped).
8. Rotate the air filter assembly 90
degrees counterclockwise and
reinstall into the rubber hose.