Unlocking And Locking The Doors; Displaying The Factory-Set Code - Ford EXPLORER 2015 Owner's Manual

Hide thumbs Also See for EXPLORER 2015:

Table of Contents

Unlocking and Locking the Doors

To unlock the driver door: Enter the factory-set 5-digit code or your

personal code. You must press each number within five seconds of each

other. The interior lamps will illuminate. Note: All doors will unlock if

the two-stage unlocking feature is disabled. Refer to Locking and

Unlocking earlier in this chapter.

To unlock all doors: Enter the factory-set code or your personal code,

then press 3•4 within five seconds.

To lock all doors: Press and hold 7•8 and 9•0 at the same time with

the driver door closed. You do not need to enter the keypad code first.

With Integrated Keyhead Transmitters

Note: You will need to have two programmed passive anti-theft keys for

this procedure.

To display the factory-set code in the information display:

1. Place the first programmed key into the ignition and switch on the

2. Switch the ignition off and remove the first programmed key.

3. Place the second programmed key into the ignition.

The factory-set code will briefly appear in the message center.

2015 Explorer (exp)

Owners Guide gf, 2nd Printing, September 2014

Show Quick Links

Table of Contents