Memory Function (If Equipped); Programming A Memory Position; Recalling A Memory Position; Recalling Memory Positions With The Remote Control - Ford EXPLORER 2015 Owner's Manual

162

MEMORY FUNCTION (IF EQUIPPED)

Programming a memory position

1. Switch the ignition on.
2. Adjust the memory features to your desired positions using the
associated controls.
3. Press and hold the desired pre-set button for about two seconds until
you hear a single tone.
Note: You can save up to three pre-set memory positions.

Recalling a memory position

Press and release the desired memory pre-set button to recall a saved
memory position.
Note: A pre-set memory position can only be recalled when the ignition
is off, or when the transmission is in park (P) or neutral (N) if the
ignition is on.
A pre-set memory position can also be recalled by:
• Pressing the unlock button on your intelligent access key fob if it is
linked to a pre-set position.
• Unlocking the intelligent driver door handle if a linked key fob is
present.
• Entering a personal entry code on the Securicode keypad. See Locks.
Note: Using a linked key fob to recall your memory position when the
ignition is off will move the seat and steering column to the Easy Entry
position (if the feature is enabled).
Note: Pressing any seat or mirror adjustment control (or any memory
button) during a memory recall cancels the operation.

Recalling memory positions with the remote control

To program the memory feature to a remote control, see the Keys and
Remote Control chapter.
2015 Explorer (exp)
Owners Guide gf, 2nd Printing, September 2014
USA (fus)
Seats
This memory control, located on the
driver door, allows automatic
positioning of the driver seat and
power mirrors to three
programmable positions. You may
also have this feature for the
steering column and power
adjustable foot pedals.