Connecting The Jumper Cables - Ford EXPLORER 2015 Owner's Manual

290

Connecting the Jumper Cables

WARNING: Do not connect the end of the second cable to the
negative (-) terminal of the battery to be jumped. A spark may
cause an explosion of the gases that surround the battery.
Note: Do not attach the negative (-) cable to fuel lines, engine rocker
covers, the intake manifold or electrical components as grounding points.
Note: In the illustration, the vehicle on the bottom is used to designate
the assisting (boosting) battery.
1
3
Ensure that the cables are clear of fan blades, belts, moving parts of both
engines, or any fuel delivery system parts.
2015 Explorer (exp)
Owners Guide gf, 2nd Printing, September 2014
USA (fus)
Roadside Emergencies
1. Connect the positive (+) jumper
cable to the positive (+) terminal of
the discharged battery.
2. Connect the other end of the
positive (+) cable to the positive
(+) terminal of the assisting battery.
3. Connect the negative (-) cable to
the negative (-) terminal of the
assisting battery.
4
4. Make the final connection of the
negative (-) cable to an exposed
2
metal part of the stalled vehicle's
engine, away from the battery and
the carburetor or fuel injection
system.