Erasing A Personal Code; Anti-Scan Feature - Ford EXPLORER 2015 Owner's Manual

Hide thumbs Also See for EXPLORER 2015:

Table of Contents

5. The doors will lock and then unlock to confirm that programming is

You may also program a personal entry code through the MyFord Touch

or MyLincoln Touch system. Refer to the MyFord Touch or MyLincoln

Touch chapter.

• Do not set a code that uses five of the same number.

• Do not use five numbers in sequential order.

• The factory-set code will work even if you have set your own personal

Erasing a Personal Code

1. Enter the factory-set 5-digit code.

2. Press and release 1•2 on the keypad within five seconds.

3. Press and hold 1•2 for two seconds. This must be done within five

seconds of completing Step 2.

All personal codes are now erased and only the factory-set 5-digit code

The keypad will go into an anti-scan mode if you enter the wrong code

seven times (35 consecutive button presses). This mode disables the

keypad for one minute and the keypad lamp will flash.

The anti-scan feature will turn off after:

• one minute of keypad inactivity

• pressing the unlock button on the remote control

• switching the ignition on

• unlocking the vehicle using intelligent access.

2015 Explorer (exp)

Owners Guide gf, 2nd Printing, September 2014

Show Quick Links

Table of Contents