Door Keypad Code; Camera Settings; Enable Valet Mode - Ford EXPLORER 2015 Owner's Manual

MyFord Touch® (If Equipped)

Door Keypad Code

To change the keypad code for your keyless entry keypad system:
1. Press the Settings icon > Vehicle > Door Keypad Code.
2. Enter your current factory code, then, when prompted, enter your
new code.

Camera Settings

This menu allows you to access settings for your rear view camera.
Press the Settings icon > Vehicle > Camera Settings, then select from
the following settings:
• Enhanced Park Aids.
• Rear Camera Delay.

Enable Valet Mode

Valet mode allows you to lock the system. No information is accessible
until the system is unlocked with the correct PIN.
1. Press the Settings icon > Vehicle > Enable Valet Mode.
2. Enter a four-digit pin twice, as prompted.
After you press Continue, the system locks until you enter the PIN again.
Note: If the system locks, and you need to reset the PIN, enter 3681 and
the system unlocks.
Settings
Access and adjust system settings, voice features, as well as phone,
navigation and wireless settings.
System
Press the Settings icon > Settings > System, then select from
the following:
Language
Distance
Temperature
System Prompt
Volume
Touch Screen Button
Beep
2015 Explorer (exp)
Owners Guide gf, 2nd Printing, September 2014
USA (fus)
System
Select to have the touchscreen display in
English, Spanish or French.
Select to display units in kilometers or miles.
Select to display units in Celsius or
Fahrenheit.
Adjust the volume of voice prompts from the
system.
Select to have the system beep to confirm
choices made through the touchscreen.
521