Door Keypad Code; Rear View Camera; Enable Valet Mode; System - Ford EXPLORER 2013 Owner's Manual

536 MyFord Touch® (If Equipped)
When done making your selections, press Run Vehicle Health Report
Now if you want your report.

Door Keypad Code

To change the keypad code for your keyless entry keypad system:
1. Press the Settings icon > Vehicle > Door Keypad Code.
2. Enter your current factory code, then, when prompted, enter your
new code.

Rear View Camera

This menu allows you to access settings for your rear view camera.
Press the Settings icon > Vehicle > Rear View Camera, then select
from the following settings:
• Rear Camera Delay
• Visual Park Aid Alert
• Guidelines.

Enable Valet Mode

Note: If the system locks, and you need to reset the PIN, enter 3681 and
the system unlocks.
Valet mode allows you to lock the system. No information is accessible
until the system is unlocked with the correct PIN.
1. Press the Settings icon > Vehicle > Enable Valet Mode.
2. When prompted, enter a four-digit PIN.
After you press Continue, the system locks until you enter the PIN again.
Settings
Access and adjust system settings, voice features, as well as phone,
navigation and wireless settings.

System

Press the Settings icon > Settings > System, then select
from the following:
Language
Distance
Temperature
2013 Explorer (exp)
Owners Guide gf, 4th Printing, November 2012
USA (fus)
System
Select to have the touchscreen display in
English, Spanish or French.
Select to display units in kilometers or miles.
Select to display units in Celsius or
Fahrenheit.