Facing Overview; Optional Faceplates - Sizing Chart - Travis Industries 564 SS Installation Manual

Built-in direct vent fireplace
Hide thumbs Also See for 564 SS:
Table of Contents

Advertisement

32

Facing Overview

Upgrade faces are available for this fireplace and may influence facing installation. Consult with your
Travis Dealer if you are using an upgrade face.
Optional non-combustible facing may be installed on the fireplace. Use the guidelines below to determine
the location (also see the following pages for detailed diagrams.
Tile Line
Any non-combustible facing under 25mm thick (see "Thin Facing" on page 33).
Masonry Line
Any non-combustible over 25mm thick (see "Thick Facing" on page 35).
Hearth Line
Non-combustible hearth/facing should be installed up to this location (25mm above the base of
the fireplace). The fireplace may be raised to accommodate thicker hearth materials.
Optional Faceplates – Sizing Chart
Name
FPX Artisan, Classic, Fr Ctry
Wilminton
Victorian Lace
Bungalow, Tree of Life
Travis Industries
Installation
Height
Width
735mm
915mm
735mm
915mm
700mm
825mm
700mm
825mm
(for qualified installers only)
NOTE: The hearth or facing can extend no
NOTE: The hearth or facing can extend no
greater than 25mm above the base of the
greater than 1" above the base of the fireplace.
fireplace. The fireplace may be raised to
The fireplace may be raised to accommodate
accommodate thicker hearth materials.
thicker hearth materials.
Notes
1.5m Radius – May fit over top of tile facing
May fit over top of tile facing
Optional facing will butte to edge of faceplate (tile line)
Optional facing will butte to edge of faceplate (tile line)
4070620
100-01199_000

Advertisement

Table of Contents
loading

Table of Contents