Appendix A: User Settings; Table 11-1: User Settings - Eaton 93PM User And Installation Manual

11 APPENDIX A: User settings

The UPS has the following settings that are user modifiable. In the Home screen, select Settings.
User settings:
Setting
Info
About
GSM
Call Service

Table 11-1: User settings

To modify the Config settings, you need to sign in.
Setting
Language
Unit Name
Clock
Signal Inputs
Relay Outputs
Battery Test
Bypass Limits
Screen Saver Timeout
Meters
Lamp Test
HMI backlight
Control P/W level 1
84
Description
Information on the UPS model, including part
number and serial number.
Version information.
GSM Modem.
Send automatic e-mail to service center in case
of a failure.
Description
Change the user interface language.
Change the unit name.
Change the date and time, change the clock for-
mat or enable/disable NTP clock setup.
Select signal input name and function.
Configure the relay outputs.
Change the power level and duration for battery
test.
Change bypass voltage, bypass frequency or by-
pass slew rate limits.
Change the screen saver timeout.
Change the meters format.
Enable the lamp test.
Adjust the backlight brightness.
Change the level 1 password, or remove the
password on level 1. The default value is 1111.
30-200 kW
User's and Installation Guide
P-164000249
Revision 2