Eaton 93PM User And Installation Manual page 91

Jumper is installed on EPO between pins 1 and 2 if EPO is used in the NC configuration.
Alarm relays and signal inputs are wired appropriately. (OPTIONAL)
A remote battery disconnect control is mounted in its installed location and its wiring is
terminated inside the UPS and battery cabinet. (OPTIONAL)
Accessories are mounted in installed locations and wiring is terminated inside the UPS
cabinet. (OPTIONAL)
Startup and operational checks are performed by an authorized Eaton Customer Service
Engineer.
P-164000249
Revision 2
30-200 kW
User's and Installation Guide
83