Ups Operating Instructions; Ups Controls And Indicators; Control Panel - Eaton 93PM User And Installation Manual

6 UPS operating instructions

This section describes how to operate the UPS.
NOTE
Before starting the UPS, ensure all installation tasks are complete and a preliminary startup
has been performed by authorized service personnel.
The preliminary startup verifies all electrical interconnections to ensure the installation was
successful and the system operates properly.
Read these instructions and have a thorough understanding of UPS operation before
attempting to operate any of the controls.
The UPS is configured to operate with one of following nominal voltages: 380, 400, or 415
VAC.
Before operating the UPS, confirm the UPS nominal voltage and frequency from display by
selecting Settings > Info.
If the UPS need to be operated with another voltage or frequency, contact your closest Eaton
office or Eaton authorized partner.
NOTE
The UPS in not a measuring device. All displayed measurements are only approximate values.

6.1 UPS controls and indicators

6.1.1 Control panel

The control panel, located on the UPS front door, contains a color touch screen display. It is used to
display the status of the UPS system and control the operation of the UPS.
58 30-200 kW
User's and Installation Guide
P-164000249
Revision 2