Adjusting The Shift Pedal - Yamaha XVS1100(L) Service Manual

BLEEDING THE HYDRAULIC BRAKE SYSTEM/

ADJUSTING THE SHIFT PEDAL

h. Tighten the bleed screw and then release the
brake lever or brake pedal.
i. Repeat steps (e) to (h) until all of the air
bubbles have disappeared from the brake
fluid in the plastic hose.
j. Tighten the bleed screw to specification.
Bleed screw
6 Nm (0.6 mSkg)
k. Fill the reservoir to the proper level.
Refer to "CHECKING THE BRAKE FLUID
LEVEL".
WARNING
After bleeding the hydraulic brake system,
check the brake operation.
EAS00137
ADJUSTING THE SHIFT PEDAL
NOTE:
The shift pedal position is determined by the ad-
justing bolt length a .
1. Measure:
S adjusting the length a
Incorrect ! Adjust.
Adjusting bolt length
114.7 mm
2. Adjust:
S adjusting bolt length a
a. Loosen both locknuts 1
b. Turn the adjusting bolt 2 in direction b or c
to obtain the correct shift pedal position.
! shift pedal is raised.
Direction
b
! shift pedal is lowered.
c
Direction
3-27
INSP
ADJ