NOTE:
Make sure that the battery is fully charged.
S Is the charging voltage within specification?
NO
EAS00776
4. Stator coil assembly resistances
S Remove the generator cover.
S Connect the pocket tester (Ω
tor coil assembly coupler as shown.
Tester positive probe ! White
Tester negative probe ! white
Tester positive probe ! white
Tester negative probe ! white
S Measure the stator coil assembly resis-
tances.
Stator coil resistance
0.36 X 0.44 Ω at 20_C
S Is the stator coil assembly OK?
YES
YES
The charging circuit
is OK.
1) to the sta-
1
2
1
3
NO
Replace the stator
coil assembly.
CHARGING SYSTEM
EAS00779
5. Wiring
S Check the wiring connections of the entire
charging system.
Refer to "CIRCUIT DIAGRAM".
S Is the charging system's wiring properly con-
ected and without defects?
NO
Properly connect or
repair the charging
system's wiring.
7-25
ELEC
YES
Replace the rectifi-
er/regulator.