CLUTCH
EAS00286
CHECKING THE PRESSURE PLATE
1. Check:
S pressure plate
Cracks/damage ! Replace.
S bearing
Damage/wear ! Replace.
EAS00285
CHECKING THE CLUTCH BOSS
1. Check:
S clutch boss splines
Damage/pitting/wear ! Replace the clutch
boss.
NOTE:
Pitting on the clutch boss splines will cause er-
ratic clutch operation.
EAS00288
CHECKING THE CLUTCH PUSH RODS
1. Check:
S short clutch push rod 1
S long clutch push rod 2
Cracks/damage/wear ! Replace the de-
fective part(-s).
2. Measure:
S long clutch push rod bending limit
Out of specification ! Replace the long
clutch push rod.
Long clutch push rod bending
limit
0.5 mm
4-43
ENG