Yamaha XVS1100(L) Service Manual page 138

CYLINDERS AND PISTONS
2. Install:
S piston 1
S piston pin 2
S piston pin clip (New) 3
NOTE:
S Apply engine oil onto the piston pin.
S Make sure that the "EX" mark a on the piston
faces towards the exhaust side of the engine.
S Before installing the piston pin clip, cover the
crankcase opening with a clean rag to prevent
the clip from falling into the crankcase.
3. Install:
S gasket (New)
S dowel pins
4. Lubricate:
S piston
S piston rings
S cylinder
(with the recommended lubricant)
Recommended lubricant
5. Offset:
S piston ring end gaps
a Top ring
b Lower oil ring rail
c Upper oil ring rail
d 2nd ring
6. Install:
S cylinder
NOTE:
S While compressing the piston rings with one
hand, install the cylinder with the other hand.
S Pass the timing chain and timing chain guide
(exhaust side) through the timing chain cavity.
Cylinder bolt
4-33
ENG
Engine oil
10 Nm (1.0 mSkg)