Yamaha XVS1100(L) Service Manual page 282

SHAFT DRIVE
b. If it is necessary to increase the ring gear
backlash by more than 0.2 mm, reduce the
thrust washer thickness by 0.2 mm for every
0.2 mm increase of ring gear shim thickness.
c. If it is necessary to reduce the ring gear back-
lash by more than 0.2 mm, increase the
thrust washer thickness by 0.2 mm for every
0.2 mm decrease of ring gear shim thick-
ness.
Thickness (mm)
Thickness (mm)
6-78
CHAS
Rig gear shims
0.25, 0.30, 0.40
Thrust washers
1.2, 1.4, 1.6, 1.8, 2.0