Installing The Camshaft And Rocker Arms - Yamaha XVS1100(L) Service Manual

ROCKER ARMS AND CAMSHAFTS
4-19
EAS00220
INSTALLING THE CAMSHAFT AND ROCK-
ER ARMS
1. Lubricate:
S camshaft
Recommended lubricant
Camshaft/Bushing
Molybdenum disulfide oil
2. Install:
S camshaft 1
S camshaft bushing 2
NOTE:
S The dowel pin a on the end of the camshaft
must align with the timing mark b on the cylin-
der head.
S Make sure that the No.1 camshaft 3 is
installed in the rear cylinder head and the No.2
camshaft 4 is installed in the front cylinder
head.
3. Install:
S stopper plate 1
Stopper plate bolt 2
20 Nm (2.0 mSkg)
4. Lubricate:
S rocker arm shafts
Recommended lubricant
Engine oil
ENG