Disassembling The Final Drive Assembly - Yamaha XVS1100(L) Service Manual

SHAFT DRIVE
EAS00724
DISASSEMBLING THE FINAL DRIVE AS-
SEMBLY
1. Remove:
S ring gear bearing housing nuts
S ring gear bearing housing bolts
NOTE:
Working in a crisscross pattern, loosen each
bolts and nuts 1/4 of a turn. After all of the bolts
and nuts are fully loosened, and remove them.
2. Remove:
S self-locking nut
S gear coupling
(with the special tool 1 )
Coupling gear/middle shaft tool
90890-01229
3. Remove:
S bearing retainer 2
(with the special tool 3 )
Bearing retainer wrench
90890-04077
CAUTION:
The bearing retainer has left-hand threads.
To loosen the bearing retainer, turn it clock-
wise.
4. Remove:
S final drive pinion gear
(with the special tools)
Crankshaft installer bolt
adapter 1
90890-01277
Armature shock puller 2
90890-01290
Weight 3
90890-01291
WARNING
Always use new bearings.
CAUTION:
The final drive pinion gear should only be re-
moved if ring gear replacement is neces-
sary.
6-81
CHAS