Ricoh M047 Service Manual page 166

SP Tables
1001 Bit Switch
005 Bit Switch 5
bit 0 DFU
bit 1 Multiple copies if a paper size or type
mismatch occurs
If a paper size or type mismatch occurs during the printing of multiple
copies, only a single copy is output by default. Using this BitSw, the device
can be configured to print all copies even if a paper mismatch occurs.
bit 2 Prevent SDK applications from altering
the contents of a job.
If this BitSw is enabled, SDK applications will not be able to alter print
data. This is achieved by preventing SDK applications from accessing a
module called the "GPS Filter".
Note: The main purpose of this BitSw is for troubleshooting the effects of
SDK applications on data.
bit 3 [PS] PS Criteria
Change the number of PS criterion used by the PS interpreter to
determine whether a job is PS data or not.
Pattern3: includes most PS commands.
Pattern1: A small number of PS tags and headers
bit 4
Increase max number of the stored jobs
to 1000 jobs.
Enable: Changes the maximum number of jobs that can be stored on the
HDD via Job Type settings to 1000. The default is 100.
bit 5 DFU
bit 6
Method for determining the image
rotation for the edge to bind on.
M047
CÓPIA NÃO CONTROLADA
3-4
CÓPIA NÃO CONTROLADA
0 1
- -
0: Disable
1: Enable
(Single
(Multiple copy)
copy)
0: Disable 1: Enable
0: Pattern3 1: Pattern1
0: Disable 1: Enable
(100) (1000)
- -
0: Disable 1: Enable
SM Appendix