SP Tables
Common KeyInfo Writing
Writes to flash ROM the common proof for validating the device for
@Remote specifications.
Note:
5870
These SP settings are required to connect @Remote or must also be
set after the board is replaced.
Even if @Remote is not connected, these settings are used for Web
validation, so at least SP5870 003 must be enabled.
5870 001
Writing
5870 003
Initialize
SDCardAppliMove
5873
Allows you to move applications from one SD card another. For more,
please refer to the "SD Card Application Move" section.
5873 001
MoveExec
5873 002
UndoExec
5878
Option Setup
001 Data Overwrite Security
002 HDD Encryption
M047
CÓPIA NÃO CONTROLADA
Writes the authentication data (used for NRS) in the memory.
Initializes the authentication data in the memory.
Executes the move from one SD card to another.
This is an undo function. It cancels the previous execution.
Press [Execute] to initialize the Data Overwrite
Security option for the printer. For more, see
"DataOverwriteSecurity Unit" in the chapter
"Installation".
Press [Execute] to initialize the HDD Encryption
option for the printer. For more, see "HDD
Encryption" in the chapter "Installation".
3-70
CÓPIA NÃO CONTROLADA
SM Appendix