Machine Installation; Main Unit And Option Unit; Printer Option; Sd Card Appli Move - Ricoh M047 Service Manual

2.2 MACHINE INSTALLATION

2.2.1 MAIN UNIT AND OPTION UNIT

Refer to the "Hardware Guide" for M041 model about the machines installation.

2.2.2 PRINTER OPTION

Refer to the "Hardware Guide" for M041 model about the machines installation. If more
than two optional applications are supposed to be installed, do "SD Card Appli Move"
described below.
IPDS option requires optional memory (128 MB or 256 MB). Install optional
memory first before installing the IPDS option. Otherwise, the machine may stall
when large print job data is sent to the machine.

2.2.3 SD CARD APPLI MOVE

Overview

The service program "SD Card Appli Move" (SP5-873) lets you to copy application
programs from one SD card to another SD card.
Slot 1 and Slot 2 are used to store application programs. However, more than two optional
applications are supplied for this machine. In that case, you can move application
programs from Slot 2 to Slot 1 with the following procedure.
Obey these precautions during the SD Card Appli move procedure:
The authentication data is moved with the application program from an SD card to the
other SD card. Authentication fails if you try to use the SD card after you move the
application program from this card to another SD card.
Do not use an SD card if it has been used for some other work, for example, on a
computer. Normal operation is not guaranteed when such SD card is used.
Store the original SD card in a safe location after the procedure. The original SD card
cannot be used but it must be saved because (1) the original card is the only proof that
the user is licensed to use the application program, and (2) you may need to check the
SD card and its data to solve a problem in the future.
M047
CÓPIA NÃO CONTROLADA
2-3
CÓPIA NÃO CONTROLADA
Machine Installation
SM